Skulls of Touganda

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


Dingo80

Well-Known Member
RPF PREMIUM MEMBER
I'm pretty sure that I need these. These are amazing.
I do plan on producing them, just getting all the finer points taken care of. Look for a post in the classified/junkyard (it'll be my first post of that type so not sure which one it's supposed to go in, further research will be done lol)
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Kylash

Master Member
RPF PREMIUM MEMBER
I believe these can already be bought online. I am in no way setup to produce metal items so I hesitate to delve into also producing this...that said I'm not adverse to producing a resin one for display only along side these skulls if enough people wanted it.

Ive never found a movie accurate ring being sold, some are close but theyre not exactly the right design.
 

nick daring

Master Member
RPF PREMIUM MEMBER
Yup. No accurate ring has been made yet. It's weird but everybody keeps getting it slightly wrong.

Only a couple prop photos has popped up online which of course makes the task slightly more difficult to nail.

The other "Good sign" ring has even fewer photos of to use for reference too.

1613179980973.png

1613179915352.png
1613179930126.png
1613179941118.png
1613179948807.png
1613179954941.png
1613179966756.png



1613180014651.png
1613180020713.png
1613180032590.png
1613180037824.png

1613180137980.png
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Dingo80

Well-Known Member
RPF PREMIUM MEMBER
Yup. No accurate ring has been made yet. It's weird but everybody keeps getting it slightly wrong.

Only a couple prop photos has popped up online which of course makes the task slightly more difficult to nail.

The other "Good sign" ring has even fewer photos of to use for reference too.

View attachment 1424957
View attachment 1424951 View attachment 1424952 View attachment 1424953 View attachment 1424954 View attachment 1424955 View attachment 1424956


View attachment 1424958 View attachment 1424959 View attachment 1424960 View attachment 1424961
View attachment 1424962
Well with all these reference photos I'll reach out to the modeler I commissioned and look into adding this. It won't be metal unfortunately, but will look nice on display with the other skulls at least.
 

Dingo80

Well-Known Member
RPF PREMIUM MEMBER
Well until there is a better metal version available, I've had John make me some digital assets of them for me to include with the other 3 skulls.
 

Attachments

  • 98F701F1-CF37-438C-945E-D67840057EB2.jpeg
    98F701F1-CF37-438C-945E-D67840057EB2.jpeg
    90.7 KB · Views: 8
  • 1CE49F6B-23E8-4668-8030-800909198C5B.jpeg
    1CE49F6B-23E8-4668-8030-800909198C5B.jpeg
    77.2 KB · Views: 9
  • 5D038552-BFF9-476F-860A-4C8C85A38AD0.jpeg
    5D038552-BFF9-476F-860A-4C8C85A38AD0.jpeg
    69.1 KB · Views: 7

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Dingo80

Well-Known Member
RPF PREMIUM MEMBER
The raw prints look amazing and fit perfectly...but on the wrong finger hahaha I totally spaced that these are worn on the middle fingers and not the ring fingers. I'll have to scale them up if I want to wear them on the right fingers.
 

Attachments

  • D968BD1B-B9B0-4290-8A62-F82C9C8AE4B0.jpeg
    D968BD1B-B9B0-4290-8A62-F82C9C8AE4B0.jpeg
    1.4 MB · Views: 13
  • 34F73538-06E6-4486-A90B-30620998322B.jpeg
    34F73538-06E6-4486-A90B-30620998322B.jpeg
    1.4 MB · Views: 12

Dingo80

Well-Known Member
RPF PREMIUM MEMBER
Hey everyone, I've posted an Interest thread over in the Project Runs section for any of you that were interested in acquiring a set. I'll still post here once the rings are finished.
 

Dingo80

Well-Known Member
RPF PREMIUM MEMBER
Got a bit of a surprise for you all. I decided to add LEDs to the skull ring!!! I ordered some purple/UV LEDs of the same size I currently put on the back of the eye gems (and use in my gunpla builds) and was able to get a rough prototype wired up. I still have to test the switch but I'm modifying the 3D file to reflect the physical changes I made to one of the rings so it's:
  • Cleaner looking
  • Quickly repeatable to keep both my time and everyone's cost low
  • Some parts pressure fit for convenience
Here are some pics of the modded prototype before I sneezed and ruined it haha
 

Attachments

  • 070FA236-5608-4315-9C32-73DE332F620D.jpeg
    070FA236-5608-4315-9C32-73DE332F620D.jpeg
    3.2 MB · Views: 6
  • 860E457D-C0B8-44FA-9602-6086261DE78B.jpeg
    860E457D-C0B8-44FA-9602-6086261DE78B.jpeg
    3.8 MB · Views: 5
  • E478FAB0-7FE4-4D1B-9BC7-BDA8A7AD0C08.jpeg
    E478FAB0-7FE4-4D1B-9BC7-BDA8A7AD0C08.jpeg
    1.3 MB · Views: 5
  • 243B8E38-6109-40D2-8932-AE7106650F8A.jpeg
    243B8E38-6109-40D2-8932-AE7106650F8A.jpeg
    1.4 MB · Views: 7
  • FD775C80-A3ED-4897-98DF-5E819FE24D3A.jpeg
    FD775C80-A3ED-4897-98DF-5E819FE24D3A.jpeg
    1.3 MB · Views: 5

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top