Limited Run SaberBay DARKSABER season 3 finish now available (limited quantities) saberbay.com

[Saberbay]

On the installed version is there a setting to make the blade light up constant white without flickering? I've gone through all the sound/FX selection options and haven't found one.

Also, after I scroll/light up; and then fully retract the light in the blade (using the primary round lit button) until the blade is unlit, if I click on the secondary (black) button one short press the blade scrolls/lights up blue with no sound effects and the light only extends about 75% from the base to the tip of the blade. This happens with all of the different sounds selections. Is this normal? Thanks

The black 6-32 screws are retentions ones
For Cfx
For a blade profiled with no flicker, change the flkd and pulsed to 0

The blue light after pressing secondary button is battery level

Any further questions please email justin@saberbay.com

 

[Saberbay]

Just got mine, well worth the wait!!!!
Just wanted to ask, the 4 screws for blade retention - the black set screws, or the silver ones?

The black set screw are used on the hilt emitter they
The silver ones are extra for the blade of the blade shreds
Both are different threads
6-32 for emitter blade retention
4-40 for blade sleeve

 

[xwingercrash]

Not sure about your first question, but that second function you mentioned is a battery life indicator.

Thanks!

 

[xwingercrash]

The black 6-32 screws are retentions ones
For Cfx
For a blade profiled with no flicker, change the flkd and pulsed to 0

The blue light after pressing secondary button is battery level

Any further questions please email justin@saberbay.com

Thanks! Also sent you a follow up email about the question I had on the brass chamber

 

[Jango Sket]

First time using an oled display, love it!
Just trying to figure out how to display battery level on it. Can anyone point me in the right direction?

 

[Saberbay]

A

First time using an oled display, love it!
Just trying to figure out how to display battery level on it. Can anyone point me in the right direction?

Cfx or proffie

 

[Jango Sket]

A

Cfx or proffie

Proffie

 

[kenji060]

Hey all, 3rd day of owning my proffie dark saber and its coming up with font dir not found. Did some googling so I removed the sd and reslotted to see if that would fix but didn't and made sure battery was fully charged which it was so not sure what to do next.

 

[Jango Sket]

Proffie

I ended up figuring it out - just needed to remove the 'idle'.bmp in each/selected font.

 

[draggerlane]

hey all I have a sd card question is the copy of the config file on the sd card? for the installed versions I think I have it but I was trying to update to 7.8 and copied the file to Audrino and give me errors left and right can someone help with this as I haven't update a saber since 3.6. I must be doing something wrong here

 

[Saberbay]

hey all I have a sd card question is the copy of the config file on the sd card? for the installed versions I think I have it but I was trying to update to 7.8 and copied the file to Audrino and give me errors left and right can someone help with this as I haven't update a saber since 3.6. I must be doing something wrong here

I can confirm the config is on the card. For proffie sound board questions or support please ask here Proffieboard

 

[glibglub]

Sorry to ask this again - anyone able to make an "unboxing" for those that got an installed set. My friend and I kinda figured it out - but feel like we missed something (so it's on display mode only)

 

[Bruinrogue]

Any update on the greeblies pdf/video?

 

[Saberbay]

Any update on the greeblies pdf/video?

It’s been on the main post for some time

20230126_140802000_iOS.mov

MOV File

1drv.ms

 

[Bruinrogue]

It’s been on the main post for some time

20230126_140802000_iOS.mov

MOV File

1drv.ms

Thanks! I guess Onedrive was giving me issues initially so I thought that video was down.

 

[Jango Sket]

Just got my crystal chamber from Shapeways, but only had 4 magnets left! Are there any more magnets left to purchase? I should need another 4 I think

 

[Bruinrogue]

Anyone know what happened to the info post or is it just my browser?

 

[The Sweatshop]

View attachment 1728013

Anyone know what happened to the info post or is it just my browser?

Looks like a problem with the first posts in threads, looked like it’s happening to others if not all threads

 

[Saberbay]

Looks like a problem with the first posts in threads, looked like it’s happening to others if not all threads

Looks like this and the link got resolved? Remember fastest way to reach is justin@saberbay.com

 

[Saberbay]

On Monday 11/6 Tune into www.Saberbay.com
-Get ready to grab one of the first batches of Darksaber hilts with the new powdercoated finish
What you need to know about this first batch:
-All hilts have been powdercoated to represent the season 3 version of the Darksaber, the original finish is no longer being offered
-There will be 3 installed versions ‘ready to ship’, 1 with CFX and 2 with Proffie. These feature the Goth3D chassis with the nonmetal printed crystal chamber insert. Retail price is $895
-Remainder of hilts will come as empty DIY kits with the Goth3D chassis(no crystal chamber inserts). Retail price is $495
-Extra blades from The Saber Trade will be available for purchase, some are preinstalled and have decals already applied, some will be sold as DIY kits and require soldering of the included RGBW led strip. Retail prices will range from $240 to $200 for blades. Alternative decal stickers will be available as well
-Full parts kits will be available for the Goth3D chassis for CFX and Proffie