Limited Run SaberBay Machined Alu DARKSABER Live Action Run *NOW TAKING RESERVES*

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


Saberbay

Well-Known Member
RPF PREMIUM MEMBER
STATUS: 08/04/21- Waiting for 2ND round of Prototypes, Once Prototype is approved Reserves will stay open for another 40-60 days for a higher chance that we receive more reserves and the cost per unit be lowered for those on the reserve. Few units will be left over after the fact and will not be priced as low for those on the reserve. In other words... dont sleep on it!
tinyurl.com/SBDSLIST
Hi Rpfers!
Saberbay here
We have been working on this with Guabe since September and are finally glad to share a sneak peek at this project with you all.
The Saber Trade is also working with us to provide a blade option! As you can see the shape of the emitter cannot accept a standard tubular blade. And being that the onscreen blade is flat and not very wide the saber trade is making a accurate blade with some durability as well!

We did not rush this and decided to go with the details as seen on the season 2 version and have studied the references available to us.
There certainly is multiple version and we decided to take the aspects which represent this model the best.

VIDEO OF ASSEMBLED RESIN PRINT OF NEAR FINAL VERSION

5/4/21 OK!!!! The time has come!

This project has been quoted to be done within 30-60 days from the day we approve of the sample. We always expect the shop to take double the time especially since they are doing the color finishing work as well and shops do see supply shortage sometimes especially in todays climate.

So we expect once the sample is approved and production goes full swing it will take 60-120 days until shipment.

We are putting in the order for the samples now.

Final Cost will be determined by the amount of reserves made.
100 Units Reserved=$400
200 Units Reserved=$350
300 Units Reserved=$300

The custom blades will be sold separately By Devin at The Saber Trade The Saber Trade.
Devin has informed us that the Blades will cost between 200-350$ depending on if you order DIY or Ready to use.
Devin has been working hard at making the Diy kit straight forward and the pcb's in our install kit are a must for easy of install.
More info on how to order the blade from The Saber Trader but we are working closely with them so the blades are ready by the time the hilts are done.

Install Kit will be and will be an add on item 35$
Install kit will include the chassis to hold the electronics, the pcb set to connect the dark saber to the blade, and the switch pcb which will have 2 tactile switches and accent leds to illuminate the button as seen in the season 2 finale. The kit will NOT include a battery, speaker, soundboard. We will have links on where to source those and how to install them into this kit.
If you do not add the install kit at the time of deposit we can not guarantee the price as we will be making the chassis and pcbs in bulk. Smaller orders of the items could cost up to twice as much but we will try to stock the pcb parts for the blade and switches at saberbay and the chassis will be available at ShrtokCustomWorx shapeways shop too along with crystal chamber inserts you can order in metal like his past designs for other hilt models.

To Sign up for this run we will require a 200$ deposit(Please do not pay more that $200 until they are ready to ship to you!!!).

The deposit will be refunded if anything goes south with the shop(has never happened to us but just to be sure we are reassuring you that we are sending payment with protection services )

We will send an invoice to you for $400 and require only $200 be paid at this time. You do not have to choose to add the install kit at this time but no guarantees the price will stay the same for the install parts

When they are getting ready to ship to us from the factory we will adjust the final cost if 200+ or more were reserved and we will be adding in the shipping cost.

If you are having it shipped to a saber installer or shop you can let us know at anytime and we can change the shipping address.

Thank you for reading all of the above.

RESERVE INSTRUCTIONS
If you are ready for the reserve invoice and understand that you are ONLY to pay $200 and final cost later($435 or less depending on options you choose and how many sign up, plus shipping).
Please simply email us JUSTIN@SABERBAY.COM with the following format

email subject: my ds reserve
email content:
PAYPAL EMAIL ADDRESS
SHIPPING ADDRESS
ARE YOU ARE ADDING THE INSTALL KIT?
DO YOU PLAN ON ORDERING A BLADE FROM THE SABER TRADE?
Let us know have you any questions or concerned. Customer satisfaction is of great importance to us. We been doing this awhile and happy customers is our main goal. Check out our Reviews
 

Attachments

  • RENDERW2.png
    RENDERW2.png
    1.1 MB · Views: 1,032
  • RENDERW3.png
    RENDERW3.png
    831.1 KB · Views: 994
  • RENDERW4.png
    RENDERW4.png
    1.2 MB · Views: 924
  • RENDERW5.png
    RENDERW5.png
    814.9 KB · Views: 1,041
  • ds1.jpg
    ds1.jpg
    3 MB · Views: 275
  • ds2.jpg
    ds2.jpg
    2.4 MB · Views: 268
  • ds3.jpg
    ds3.jpg
    732.1 KB · Views: 230
  • ds4.jpg
    ds4.jpg
    2.1 MB · Views: 207
  • ds5.jpg
    ds5.jpg
    2.4 MB · Views: 183
  • ds6.jpg
    ds6.jpg
    672.1 KB · Views: 178
  • ds7.jpg
    ds7.jpg
    951.4 KB · Views: 172
  • ds8.jpg
    ds8.jpg
    4.7 MB · Views: 176
  • ds9.jpg
    ds9.jpg
    2.4 MB · Views: 177
  • ds10.jpg
    ds10.jpg
    2.9 MB · Views: 178
  • ds11.jpg
    ds11.jpg
    2.5 MB · Views: 188
  • pommel1.jpg
    pommel1.jpg
    118.3 KB · Views: 176
  • pommel2.jpg
    pommel2.jpg
    80.7 KB · Views: 300
Last edited:

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Saberbay

Well-Known Member
RPF PREMIUM MEMBER
For all those interested, we will definitely be updating here but for the quickest updates, when we have em, please sign up for the email list.
We have been making tiny accuracy changes and decided to have 2 pommels included, a static and vented.
As more details have come out we may make a few more changes but we still our going back and forth with our factory as it is a very detailed design and will require a lot of critique before it gets machined

Thank you all again for your interests.
We promise not to disappoint!
 

ScourgiousJinx

Well-Known Member
For all those interested, we will definitely be updating here but for the quickest updates, when we have em, please sign up for the email list.
We have been making tiny accuracy changes and decided to have 2 pommels included, a static and vented.
As more details have come out we may make a few more changes but we still our going back and forth with our factory as it is a very detailed design and will require a lot of critique before it gets machined

Thank you all again for your interests.
We promise not to disappoint!
It's great that you're doing two pommels! The designs look incredible.
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top