Limited Run RUN CLOSED * DL-44 ESB Blaster Machined Parts Set * RUN CLOSED

[3oin]

Agreed ! in fact they look so good with the shiny brass lens retainers I am tempted to do a "new DL-44 straight out of the box" look ... maybe.

 

[Captain Dunsel]

WOW!

Email sent to update the steel detail piston greeblies to my order!

 

[ichnob]

The scopes look great! *checks PayPal history*

-Deluxe Scope Machining
-Rear Scope Ring
-Front Scope Ring
-Full Ring Light Socket

If that is anywhere close to the result from the scope invoice, then my god, it's so beautiful.

 

[Boba Debt]

I may have confused some people.

If you want the steel disk details that go to the left and right of the pistons you do not have to email me about them now

When it is time to ship your kit you will have the option to add them at that time along with paying for the resin greeblies, hardware and glass lenses.

 

[Victory Kid]

Wow! Everything looks great! I'm amazed at the community cohesiveness required for folks to do this much extra work in their busy lives to help out their fellow enthusiasts. Good people here, doing amazing work.

 

[Demetrius]

Hi, Glad to see the end product of this amazing run. thank you for doing this. I ordered this kit for my denix, I do not need the piston, am I covered for a full kit?. Will I receive a shipping/additional parts invoice this weekend?

Once again, thank you!

 

[Boba Debt]

Yes, your kit will be ready to ship this week.

Please email me so I don't accidently miss it.

Hi, Glad to see the end product of this amazing run. thank you for doing this. I ordered this kit for my denix, I do not need the piston, am I covered for a full kit?. Will I receive a shipping/additional parts invoice this weekend?

Once again, thank you!

 

[ImperialWalker]

Which parts do you specifically need - The Motor / Coil plate of the Distributor Retainers?

Yes. I have the pistons for the side that come in the kit, but need the other parts that don't come in the kit. I believe it is the Motor / Coil plate(s). There is one near the handle that is compete, and then a second one that was "chopped" up for the middle of the pistol, correct?

 

[Boba Debt]

Yes. I have the pistons for the side that come in the kit, but need the other parts that don't come in the kit. I believe it is the Motor / Coil plate(s). There is one near the handle that is compete, and then a second one that was "chopped" up for the middle of the pistol, correct?

Vince will be providing those parts through me for about $1 a piece. I will ask everyone to email me with a list of what resin greeblies they want and then I will just add them to your final invoice.

 

[Dann]

The scopes look excellent!

I can't remember if you said you were doing the two different scope bolt head sizes, or not. Is that still a thing?

Thanks to you and the shop for all your hard work!

 

[Boba Debt]

Yes, I did the thick and thin profile bolt heads for the scopes.

I still have a couple sets left

The scopes look excellent!

I can't remember if you said you were doing the two different scope bolt head sizes, or not. Is that still a thing?

Thanks to you and the shop for all your hard work!

 

[thd9791]

I'm doing two blasters (Hoth and Bespin), and I already have a Denix for my Hoth, so I started to drill the gun.

I decided to drill all the way through and put the nuts on either side of the pistons. I'm using the beautiful anodized Hoth mount made in this run and it lines up on a Denix, Within 1-2 mm - if anyone wants to attempt this with me



Thanks for this run! When the kits finally ship I can't wait to see all the projects that come of it

 

[Dann]

Looking good! Wise of you to drill through. I believe some of us believe this was very likely the way the original was done.

 

[kurtyboy]

If you're going to do it, do it right

Looking good! Wise of you to drill through. I believe some of us believe this was very likely the way the original was done.

 

[thd9791]

Looking good! Wise of you to drill through. I believe some of us believe this was very likely the way the original was done.

If you're going to do it, do it right

Thanks guys, I've always felt this way (I destroyed a graflex lever for the ranch saber and destroyed a .303 flash hider for a clamp spacer, so I might just be a monster)
I have a thread for this, I'll update whether or not the trapezoidal magazine makes an issue.

It looks to me like they used a resin re-cast of pistons. the real ones are much wider than the ones seen on screen. My plastic ones nearly cover the holes on both sides!

 

[boochydog]

hey, quick question for you all that may have better insight than i. i am making the hoth version of the DL-44 blaster for the scope bolts, would the thick or thin bolt head option be better (or a mix of both)? i am almost thinking i may get differing opinions here...

thanks!!

 

[RexKramer]

Hoth is same as Luke Bespin, no?

Small in the back and larger in the front if I remember correctly?

 

[ogrotesque1]

The scopes look amazing and beautiful!

 

[PhortKnight]

Just sent my info for the scope and parts

 

[Dann]

The scopes are a triumph!