Limited Run ROTJ Jabba's Palace Guard Blaster "Mos Eisley Special" DL-18 Parts - Taking Payments Now!

Corellianexports

Sr Member
RPF PREMIUM MEMBER
Pictures are here:

http://www.partsofsw.com/dl18.htm
jabba11.jpg
dl18caps.jpg

Actual Side Parts machined out of aluminum:

ROTJ Jabba Pistol Parts.jpg

The parts I will be machining out of aluminum will be the "scissor" pieces.

There are 4 parts per set. A set will be $115 plus shipping ($10 domestic - $125 total).

Pre-payment or Deposits ($115 per set) can be sent here:

Paypal: corellianexports@aol.com

If possible, please send it as "Family/Friends" and be sure to put "Jabba Blaster Parts" along with your full name, rpf id and address in the message section.

If you're interested in a set, just post a reply with the number of parts you are interested in. Thanks ;)

Update (11/04/22): The larger plates are machined. I will be starting on the smaller plates later this week. The latest run should be complete by 11/19.
Save your bucks! ;)

I have plenty of scopes, mounts, bolts and motor/coils in stock, so if those parts are also needed, just let me know.

If you're on the waiting list, I will contact you via a pm for payment once the parts are ready to be shipped.
If I don't hear from you within a week after I have sent you a pm, I will mark you as "dropped" from the waiting list.

Waiting list for Side Parts (2022):

1. Wuher Da Brewer (1 set Side Parts) - Contacted 11/19 - Pending
2. Mech10 (1 set Side Parts w motor/coils) - Paid 11/16 - Shipped 11/17
3. eBay guy (2 sets side parts w motor/coils and scope) - Pending 11/19
4. teecrooz (1 set side parts w motor/coils and scope) - Paid 11/16 - Shipped 11/17
5. Cinistar (1 set side parts w motor/coils and scope) - Paid 11/19 - Shipped 11/21
6. etsy guy (1 set side parts) - Pending 11/19 - Paid 11/19 - Shipped 11/21
7. Hokie1 (1 set side parts) - Paid 11/18 - Shipped 11/21

Waiting list for Side Parts (2021 - Closed):

1. Darth Elevator (1 set Side Parts) (Paid 1/8/22 & Shipped 1/10)
2. Djedi (1 set Side Parts and Reinforced Scope with Mount/Bolts) (Paid 1/8/22 & Shipped 1/10)
3. MarcoCazares (1 set Side Parts and Reinforced Scope with Mount/Bolts) (Paid 1/10/22 & Shipped 1/10)


Waiting list for Side Parts (2020 - Closed):

1. Psab Keel (Side Parts: Paid 9/28 - Shipped 10/3)
2. Darth Wilder (Side Parts, Scope, mount and motor/coils - Shipped 10/13)
3. Mgoob (Side Parts - Shipped 10/13)
4. JetSetWilly (Side Parts - Shipped 10/13)
5. Spare (Side Parts)

Waiting list for Side Parts (2019 - Closed):

1. Jbell (Paid 3/15/19/Shipped 4/5/19)
2. Spare - Sold 7/27/19
3. Spare - Sale pending 8/28/19



Waiting List for Side Parts (2018 - Closed):

1. Hirohawa (Shipped - 11/9/18)
2. Scottjua (Shipped 10/26)
3. el toro (Shipped 10/26)
4. mgoob (Shipped 11/3)

Waiting List for Scope Parts (2018 - Closed):

1. Hirohawa (Scope and Mount) - Paid (10/14)
2. Scottjua (Scope and Mount) - Shipped (10/26)
3. JetSetWilly (Scope and Mount) - Shipped (10/26)
4. Enaswade (Scope and Mount) - Shipped
5. Pedro (Scope and Mount) - Shipped
6. thd9791 (Scope and Mount) - Shipped
7. el toro (Scope and Mount) - Shipped (10/26)
8. mgoob (Scope and Mount) - Shipped (11/3)
9. B-wing (Scope and Mount) - Shipped (10/30)
10. Dann (Scope w Missing tip) - Payment pending (11/3)
11. sjanish (Scope and Mount) - Shipped

Additional parts:

Resin Scope: $25
Resin Scope (Reinforced): $29
Resin mount with bolts: $6
Resin Motor/Coils (Set of 2): $2 (Free with purchase of side plates)

Domestic/International Shipping for Resin Scope with Mount: $7


Scope and Mount:
DSCN3282.JPG

Resin Scope and Mount with bolts:
Jabba Scope 1.JPG
Jabba Scope 2.JPG
Jabba Scope 3.JPG

Reference photo:
jabba11.jpg


DSCN3282.JPG

Jabba Scope 1.JPG

Jabba Scope 2.JPG
Jabba Scope 3.JPG
 
Last edited:

Pedro

Sr Member
RPF PREMIUM MEMBER
Re: Jabba's Palace Guard Blaster "Mos Eisley Special" Parts

Oh man, sorry I missed your message! I'm still in!! Woohoo! I'll PM tomorrow. :)
 

Corellianexports

Sr Member
RPF PREMIUM MEMBER
Re: Jabba's Palace Guard Blaster "Mos Eisley Special" Parts

You're still on the list, Pedro.

I've updated the machining time. The weather here has dropped down to freezing, so it's been too cold to do any thing in my machine shop, so that has slowed down my machining time considerably.
I do plan on accomplishing some thing tonight, however.
Pictures of the final parts are pending along with final prices.
 

thd9791

Master Member
RPF PREMIUM MEMBER
Re: Jabba's Palace Guard Blaster "Mos Eisley Special" Parts

interested pending final prices! Building one of these now on a Manu-arm french version of the pistol. I planned on cutting these out myself, but I can't rule this run out!
 

Corellianexports

Sr Member
RPF PREMIUM MEMBER
Re: Jabba's Palace Guard Blaster "Mos Eisley Special" Parts

Parts have shipped.
I have one set left. I'm still waiting to hear back from Peter.
 

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top