Roman Props MK1 Weathered Project Somewhat Pre Episode IV Progress

GreyUser

GreyUser

Member
RPF PREMIUM MEMBER
I have a Rudy Pando's Crystal Chamber as my Lightsaber has not yet arrived, this will be a slow process as I want to do it right. This is the progress of the heat damage I have done so far to the crystal chamber. I have a Quartz Crystal for the Kyber crystal and a Cubit Zirconium Round cut Gem for a focusing crystal. I believe the heat damage texture I did is to my desired effect but if anyone has any thoughts let me know. I need to get some aluminum back for the finishing touches on the finish. I also will be acquiring some upgrades to the chamber by ShtokCustomWorx and one by The Proplicator.
Let me know what you think of my texture work so far for a heat damaged Crystal chamber that was used in the clone wars.
 

Attachments

  • 11-22-20 Crystal Chamber Weathering 1.jpg
    11-22-20 Crystal Chamber Weathering 1.jpg
    2 MB · Views: 274
  • 11-22-20 Crystal Chamber Weathering 2.jpg
    11-22-20 Crystal Chamber Weathering 2.jpg
    2 MB · Views: 243
  • 11-22-20 Crystal Chamber Weathering 3.jpg
    11-22-20 Crystal Chamber Weathering 3.jpg
    2.5 MB · Views: 344
  • 11-22-20 Crystal Chamber Weathering 4.jpg
    11-22-20 Crystal Chamber Weathering 4.jpg
    1.9 MB · Views: 279
  • 11-22-20 Crystal Chamber Weathering 5.jpg
    11-22-20 Crystal Chamber Weathering 5.jpg
    1.9 MB · Views: 232
  • 11-22-20 Crystal Chamber Weathering 6.jpg
    11-22-20 Crystal Chamber Weathering 6.jpg
    2.6 MB · Views: 223
I finally got my core kit, I am truly amazed! I can't say enough good things about Roman Props!!! This Lightsaber feels like it is real, looks like it is real, I was awe struck when I opened the box, you can pause Episode IV at any point accept when he's using the saber prop fighting vader and it is so exact it is insane. This will be the perfect kit to put electronics too! With the Ruidy Pando's Crystal chamber I'm so excited, Any thoughts would be appreciated.
 

Attachments

  • 11-25-20 Roman Props MK1 1.jpg
    11-25-20 Roman Props MK1 1.jpg
    1.9 MB · Views: 401
  • 11-25-20 Roman Props MK1 2.jpg
    11-25-20 Roman Props MK1 2.jpg
    1.9 MB · Views: 205
  • 11-25-20 Roman Props MK1 3.jpg
    11-25-20 Roman Props MK1 3.jpg
    1.7 MB · Views: 280
  • 11-25-20 Roman Props MK1 4.jpg
    11-25-20 Roman Props MK1 4.jpg
    998.4 KB · Views: 253
  • 11-25-20 Roman Props MK1 5.jpg
    11-25-20 Roman Props MK1 5.jpg
    866.8 KB · Views: 271
This thread is more than 3 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

Similar threads

SuperSnarf400
Roman Props MK1 / ShtokCustomWorx Chassis Question
Replies
10
Views
642
SuperSnarf400
SuperSnarf400
redbutton
Episode 1 Lightsaber knob - Got One!
Replies
5
Views
579
AnubisGuard
AnubisGuard
Captain Dunsel
Telegraph Graflex Flash Coming From Roman!
Replies
8
Views
833
BudaFett
BudaFett
ghostryder
Mandalorian props featurette
Replies
2
Views
365
Halliwax
Halliwax
TK41434
Episode VII ... Unkar's thugs Costume
Replies
0
Views
347
TK41434
TK41434
Back
Top