Reply to thread

Message: <blockquote data-quote="Uratz" data-source="post: 4806802" data-attributes="member: 11708">For Bio Helmet alone1:1 Ratio PU Resin plus fiberglass chopped mat is the material I use.  The Glass Fibers absorb the mixed liquid resin and gets hard after few minutes. All my Bio's are made this way and it can build-up layer and becomes very strong and light. Epoxy resin is the dark grey and black kind, some people use it and I have some Bio's like Biohunter76's Wolf is made with that stuff but no fiberglass.  Its lightweight and strong as well. I also got a Ruffkintoy's Celtic bio made with Bondo the first layer then resin backed fiberglass. All together very heavy and strong. My P2 BIo made by Hez is a resin only Bio and its also very light weight and thin.  So you have many materials to work with and they are all dangerous chemicals and require Gloves and Respirator.  So read all instructions/ warnings and work in a well ventilated space.  Good Luck!</blockquote>

This thread is more than 13 years old.

Your message may be considered spam for the following reasons:

Your new thread title is very short, and likely is unhelpful.
Your reply is very short and likely does not add anything to the thread.
Your reply is very long and likely does not add anything to the thread.
It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
Your message is mostly quotes or spoilers.
Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
This thread is locked.