Reply to thread

Message: <blockquote data-quote="swgeek" data-source="post: 3693649" data-attributes="member: 6392"><p>Fiberglass is good. You could also use a skin of urethane resin and back it with 2 part foam. Pour enough resin in to give your prop a thin skin, tumble the mold around until the whole thing is coated (it might take a couple pours). Then once the resin sets up, pour in A/B foam, let that set, then demold.</p></blockquote><p></p>

This thread is more than 6 years old.

Your message may be considered spam for the following reasons:

Your new thread title is very short, and likely is unhelpful.
Your reply is very short and likely does not add anything to the thread.
Your reply is very long and likely does not add anything to the thread.
It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
Your message is mostly quotes or spoilers.
Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
This thread is locked.