-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Done / Completed Pepsi Perfect - big acrylic plate for displaying your bottles -BTTF
- Thread starter Roland
- Start date
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
I like your shadow box. very nice. I was thinking about doing something similar but I have been trying to find a way to get the accurate pattern or a better image to print it from. The table top in the movie had more of a squiggly line kinda thing going on it. the one you have is more speckle-dot ish. Does anyone know how or where to get a better image of the pattern used in the movie? I have a few screen caps but they are very small and low res. I cant find a good enough image to photoshop and look right.
Again very nice job heartlikewar.
I like your shadow box. very nice. I was thinking about doing something similar but I have been trying to find a way to get the accurate pattern or a better image to print it from. The table top in the movie had more of a squiggly line kinda thing going on it. the one you have is more speckle-dot ish. Does anyone know how or where to get a better image of the pattern used in the movie? I have a few screen caps but they are very small and low res. I cant find a good enough image to photoshop and look right.
Again very nice job heartlikewar.
Last edited by a moderator:
heartlikewar
New Member
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
I explain more in my YouTube video about this!
I explain more in my YouTube video about this!
Last edited by a moderator:
Spiderstella
Sr Member
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
Hi alloccosol here are some screen caps that might help you with the pattern! Nice job heartlikewar
and to all thinking about buying one of Roland's display Pepsi stand then you should you will not be disappointed
Hi alloccosol here are some screen caps that might help you with the pattern! Nice job heartlikewar
and to all thinking about buying one of Roland's display Pepsi stand then you should you will not be disappointed
Attachments
Ojobenito
Well-Known Member
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
I made the pattern in photoshop taking screen captures, modifying the perspective so the pattern is correct, and then doing all the little black "lines" by hand over the screen capture image that was on a layer below my pattern.
I don't know how to work with vectors, so my pattern is a PSD image at 300ppp if I remember correctly.
I'll search for it and upload it if you want to have it. ;-)
I made the pattern in photoshop taking screen captures, modifying the perspective so the pattern is correct, and then doing all the little black "lines" by hand over the screen capture image that was on a layer below my pattern.
I don't know how to work with vectors, so my pattern is a PSD image at 300ppp if I remember correctly.
I'll search for it and upload it if you want to have it. ;-)
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
Thanks Spiderstella for the screen grabs. Much appreciated.
- - - Updated - - -
Ojobenito that would be great too if you still have the file. Thanks!
Hi alloccosol here are some screen caps that might help you with the pattern! Nice job heartlikewar
and to all thinking about buying one of Roland's display Pepsi stand then you should you will not be disappointed
Thanks Spiderstella for the screen grabs. Much appreciated.
- - - Updated - - -
Ojobenito that would be great too if you still have the file. Thanks!
Last edited by a moderator:
Ojobenito
Well-Known Member
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
EDIT: Sorry, this is a thread for Roland's Actrylic Display purchase. I'll move the message that was here before (about the pattern and the file uploaded) to the Back to the future 2 "free paper props" thread. (because the pattern is a paper after all... or a sticker
Once again, sorry, Roland, for offtopic-ing your thread.
EDIT: Sorry, this is a thread for Roland's Actrylic Display purchase. I'll move the message that was here before (about the pattern and the file uploaded) to the Back to the future 2 "free paper props" thread. (because the pattern is a paper after all... or a sticker
Once again, sorry, Roland, for offtopic-ing your thread.
Last edited:
steveparkes
Active Member
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
Hi Roland, I have just sent you via paypal for one of these
Stephen
Hi Roland, I have just sent you via paypal for one of these
Stephen
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
It's just 2.5 millimeters thick (0.1 inch), so it doesn't stand alone on its side (if you don't lean it against the wall). It's intended to lie on its flat side.
It's just 2.5 millimeters thick (0.1 inch), so it doesn't stand alone on its side (if you don't lean it against the wall). It's intended to lie on its flat side.
jhk1976
Well-Known Member
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
But it's rigid enough that it could as long as something held it up, right? I ask because my bookcase (which is fast becoming the BTTF museum), isn't wide enough to lay it flat. I thought it Could work standing upright, and I can always get some sort of acrylic stand to prop it up. My idea was to have my PP bottles in front of it, with the big Pepsi logo behind them.
But it's rigid enough that it could as long as something held it up, right? I ask because my bookcase (which is fast becoming the BTTF museum), isn't wide enough to lay it flat. I thought it Could work standing upright, and I can always get some sort of acrylic stand to prop it up. My idea was to have my PP bottles in front of it, with the big Pepsi logo behind them.
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
Absolutely! It's solid acrylic. You can hold the edge with two fingers and it doesn't bend.
Absolutely! It's solid acrylic. You can hold the edge with two fingers and it doesn't bend.
jhk1976
Well-Known Member
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
I'm in. Payment sent.
I'm in. Payment sent.
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
Payment received. Thank you!
Payment received. Thank you!
steveparkes
Active Member
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
I received my acrylic display and wonka bar Roland, they are FANTASTIC. I can't wait to make a countertop with light to display my pepsi on. Many thanks
I received my acrylic display and wonka bar Roland, they are FANTASTIC. I can't wait to make a countertop with light to display my pepsi on. Many thanks
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
Thanks, I'm glad that you like it. I hope to see some pictures, when you are finished.
I received my acrylic display and wonka bar Roland, they are FANTASTIC. I can't wait to make a countertop with light to display my pepsi on. Many thanks
Thanks, I'm glad that you like it.
I hope to see some pictures, when you are finished.
jhk1976
Well-Known Member
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
You're welcome. Is there tracking info yet? I didn't see a number posted.
Payment received. Thank you!
You're welcome. Is there tracking info yet? I didn't see a number posted.
Re: Pepsi Perfect - big acrylic plate for displaying your bottles - BTTF
It's not shipped, yet. Sorry for the delay! Next shipping day of my sold props is next Monday. Once it's shipped, you will find your tracking number on my sales list.
jhk1976
It's not shipped, yet. Sorry for the delay! Next shipping day of my sold props is next Monday. Once it's shipped, you will find your tracking number on my sales list.
Last edited by a moderator:
Similar threads
Done / Completed
Foundation Prime Radiant Finished Prop
