Open mouth Wolf (undamadged) wip

LunaticNic

Sr Member
Thanks! :)
But yeah, I've got about 125$ of silicone on it, and still need to mold the back portion and lower mandibles.
Thinking another gallon of rebound 25 should do it though ... whenever I can afford that lol
 

XilianX2010

New Member
Thanks! :)
But yeah, I've got about 125$ of silicone on it, and still need to mold the back portion and lower mandibles.
Thinking another gallon of rebound 25 should do it though ... whenever I can afford that lol

Just out of curiosity, what do you plan on using for the mother mold (the hard shell on the outside of the silicone). I've been wanting to do a brush mold on some of my small projects and I've seen multiple options for going about doing it. :)
 

vebo1

Sr Member
XilianX2010, Plasti Paste Epoxy from Smooth-on would be a good choice to brush on but expensive $120 for the gallon unit. Great tensile strength. less material required to make mother mold. That is what i plan to use.
 

XilianX2010

New Member
XilianX2010, Plasti Paste Epoxy from Smooth-on would be a good choice to brush on but expensive $120 for the gallon unit. Great tensile strength. less material required to make mother mold. That is what i plan to use.

Okay cool! I had looked into Plasti Paste II before, but never really looked at Epoxy. My projects are much smaller (making magnets) so I could get away with trial units. I've used plaster bandages for a previous project but it's definitely not the best for long-term use. Thanks for the advice :)
 
This thread is more than 4 years old.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top