Im new to pepakura but here is what i have so far...The front side of the mask, the front of the chest and the Cybus Industries logo chest piece. the crotch and a good start on the back torso. Keep in mind that ive never even heard of pepakura until this project, so my work may not be as good as others here.
(UPDATE...I have completed the back of the mask as well.) havent taken a photo of it but i have attached it just so i could try it on and play around with it. I have decided to MOD one of the voice lids and attach a casted back panel to it instead, Im sure i will be much happier with the results.
The head piece had many, many small intricate parts to mark and cut out...I still had unfinished business here with the ears, but i have decided to build in foam so i side-tracked and started on other parts since i wasnt going to use this for the completed costume anymore.
The chest parts had many lines but were not as intricate as the parts for the mask so working on that seemed to move along much faster. Some parts of this seem to be inaccurate like the rounded arm holes that stick out on each side and also a circular piece on the chest which should be pointed in shape but for some reason its not...Its a good thing i have better knowledge about what my end result should look like so once built in foam i can fix these issues. Once im finished with it, i will start on the crotch next.
The "C" logo was fun and quick to put together. I have the small triangles and the circular tube that goes with this piece but havent applied them just yet...
More views of the updated work with all parts placed together.
So here is the crotch part and i printed it out in color because i was curious to see what it would look like. Its shape looks pretty accurate..
Posting a pic of work i have so far of the back torso..
This part is not finished, however its atleast 95% to completion. I have put it aside for now.
I wanted to comment on something..Some of these parts just seem extremely difficult to work with because of the way the numbers overlap as seen in this photo ive posted.
Work of the Left arm gauntlet in pepekura...has been upgraded to foam gauntlets.
Picked up an excellent deal on a cyberman voice changer lid for $20.00, but i paid with money i made from taking surveys...so it kinda feels like i acquired it for free so now i have two cyber lids.
I have completely UPGRADED the left glove..i have much "SHAME" for the old glove and decided that it was in NO WAY going to be used for this costume. What else can i say except for trial and error. However I am pleased with the results that have yielded from this latest upgrade.
These are the bolts that ive made out of medicine bottle tops and foam -need 6 more to finish them up for a total of 12. In the photo to the right you can see ive placed the parts together just to see what it looks like so far...If you look close you can see that the chest appears bumpy, thats because it was when i took the pic, However I have since then eradicated those nasty bumps and now its as smooth as a babies butt. The neck piece doesnt quite show up in the photo as well as i would like.I have to say that Foam is a much better material to work with.
[
Here is Weaselflingers cast of the backside of the helmet...so far ive only trimmed the flashing off.
]
OK ive redone the "cyber diaper" or cod piece-butt in foam..im much happier with the way this looks and feels... I just need to slap on some sealer and paint thats it...the photo on the right shows the cuts that were made to shape the buttox
Here is just one of the Keyhole parts completed in foam, took about 3 hours to make but its spot on. I have made both of these but have only taken a photo of this one.
As of 3-10-12 i have completed Both the lower left arm and the lower right arm. Here are the photos of the left side only but they are identical just reversed. They look a little rough but that is because they have been covered in elmers glue to help the sealing process and then have been lightly sanded.
Today 3-14-12 i have designed my thighs and just need to work them up now..I used foil to get the correct shape of my leg and then wrapped it with duct tape and shaped it in the proper cyberman leg shape then cut it in half to open it up flat and attach to the foam for cutting. When it came time to draw out the shape of the leg detail, i just used many reference pics of the cyberman leg and began to hand draw it the best i could...i have to say that i think it came out well.
8 days later - Today 3-22-12 I have finished up the build for just one of the thighs only because i have been sick for the past 5 days now but i managed to drag myself to my workbench and finish up on the one for now. Atleast im half way there on these....except for the sealer and paint that is.
3-25-12 im still sick and havent done anything except think about this project and ive come to the conclusion that i might need to re build re design these thigh pieces. My thoughts are that the ridge around the outer thigh at the top of the thigh does not extend high enough on my leg as i believe it should. Unfortunately if i want it "RIGHT",I will need to rework it which will set me back in Money and Time. It takes 4 of these floor mats (one package) $10.00 to make this part.
3-27-12 I have re-designed the thigh again in aluminum foil with the "EXTENDED" length that i have been looking for to make this piece more screen accurate. I am still sick with the flu so this is all i have done at this point.
3-28-12 I have come across a 20% off one item coupon from harbor freight..expiration 3-31-12 so im printing it out and headed for the store. Sickly or not i cant pass this up because i need more foam especially due to the re-design issue on the thigh, not to mention im sure to need more for the upper arms which i am currently designing in my head at the moment since im not at my workbench.
4-5-12 Wow....ive made it through my illness finally and have had a chance to get back to my work bench. I have been working on the design pattern for the upper arms and have cut it out in foam. The left arm detailing pattern has been hand sketched and cut out to place on the foam matting for cutting, but i havent yet taken any photos of this work.
4-11-12 Todays update came a little later than i had expected, however its been worth the wait. I have not yet placed the dowel rod for permanent seating.
4-16-12 Ive only worked on trying to finish up more of the abdomen however not to completion. Tomorrow should bring about the unpainted and unsealed finish build for this part as long as i can get to my work bench sometime in the afternoon.
5-3-12
5-4-12 Ive finally gotten around to making the dummy stand for the suit and to aid in designing these parts. I decided that i wanted to give the paint a test run so i splashed a little on the chest.
5-8-12 I thought i would try my hand at recreating the emotional inhibitor