update on the left.
View attachment 1536339
View attachment 1536340
View attachment 1536341
I can tell the nut is not as wide but hard to tell unless you have something to compare with. Not sure if it is the new design or something I did but the new nozzle is not allowing the two side to join properly. Also for printing purposes, I miss the dome interior.
Hmm. I didn't change anything except to shorten the nut top to bottom. (And apparently not by enough? It still doesn't look right. How does it match up to the OG part?)
Also, what do you mean about missing the dome interior? I versioned up from v002 so this should have it.
No it does not. Maybe recheck what you posted and make sure it is what you thought it was.
Great. I’ll run a copy tomorrow.Okay, double-checked the measurements all around, fixed the missing geo (I hid part of the model and forgot to unhide it when I exported. Durr.) and corrected a slight front-to-back asymmetry on the nut, which I think is why it looked wrong. Didn't version up because it's a minor fix.
I'm hoping the prior export being messed up is why it didn't fit right.
If I had one of those printed in the proper scale for the Nerf gun I'd use it happily. Nice work!Okay, double-checked the measurements all around, fixed the missing geo (I hid part of the model and forgot to unhide it when I exported. Durr.) and corrected a slight front-to-back asymmetry on the nut, which I think is why it looked wrong. Didn't version up because it's a minor fix.
I'm hoping the prior export being messed up is why it didn't fit right.
If you don’t want to spend that on just the tip, then you could use the cap from a sunscreen spray bottle and a red lego lightsaber piece.for the price i think im just going to grab a field marshall scope for it. measuring up the orange part in the back of the blaster to try and replace it with a "slug" so its easier to fill and sand, do away with the pull/cockying mechanism
GeniusIf you don’t want to spend that on just the tip, then you could use the cap from a sunscreen spray bottle and a red lego lightsaber piece.
If you don’t want to spend that on just the tip, then you could use the cap from a sunscreen spray bottle and a red lego lightsaber piece.
The other thing you could do is cut the end from the toy and cast it in clear resin, you could then drill a hole and drill the hole. If you don’t have pigment then a drop of red food colouring is normally fine in epoxy.Genius
Knocked out a couple simple ones tonight. An insert for the front of the scope to match one of the screen-used props, and a scope knob based on the one Reel Fakes used. The knob is a google drive link, as it was too big to host here. It should be set to "anyone with the link" but let me know if it doesn't work.
View attachment 1536463
View attachment 1536462
NERF_Scout_Trooper_Scope_Knob_v001.obj
drive.google.com
I thought about casting the tip in clear resin, let me check out the eBay auction right nowThe other thing you could do is cut the end from the toy and cast it in clear resin, you could then drill a hole and drill the hole. If you don’t have pigment then a drop of red food colouring is normally fine in epoxy.
There is a resin scope on eBay for £11 aswell
If so, is the correct diameter suppose to be 21.1428 mm?
The nerf scope diameter where it meets the tip is about 2mm wider than a real scope.I thought about casting the tip in clear resin, let me check out the eBay auction right now