My HCG T2 Endoskull mod

ReelClones

Well-Known Member
RPF PREMIUM MEMBER
I have a Hollywood Collector's Gallery Terminator 2 Endoskull and have always been disappointed with the eyes. I find them toy like and very orange looking especially when illuminated.

Recently I noticed guyverraziel's excellent thread about his Skynet Edition Endo mod and thought i'd order a set of the Radio Shack lenses just on the off chance they would fit my HCG.

On receiving them I was amazed! The original lenses fitted to the HCG are the exact same size and pattern just more 'cheap' looking! It's as if they were molded from them!

IMG_0835.JPG
IMG_0835.JPG


I thought that id have to chop them down to the same size as the old ones in order to glue them onto the HCG but here's surprise number 2! On removing the old lenses I found that the eyes have a deep recess exactly the right diameter and depth for a straight push in fit of the new lenses with no modificaton required!

IMG_0851.JPG
IMG_0851.JPG


IMG_0852.JPG
IMG_0852.JPG


Here's a comparison shot of the new (right) and old (left) lenses. Red at last!

eyecomp.JPG
eyecomp.JPG


and in close up

Old
IMG_0841.JPG

IMG_0841.JPG

New

IMG_0840.JPG
IMG_0840.JPG


Unlit

Old
IMG_0839.JPG
IMG_0839.JPG


New

IMG_0838.JPG
IMG_0838.JPG


It's quite difficult to show in pics how much better they look but the difference is remarkable. They retain the stock look of the endo but improve the colour and depth of the eyes no end. I'd recommend this mod to any HCG owner, especially as it only takes 2 mins and requires zero tools/skill! I hope it was ok to start a new thread, as it's a different skull I didn't want to hijack the skynet edition thread :)
 
Last edited:
And then the skull said "My vision is betta, I can now see Sarah Connah!!!"

Much better look to it! Glad to hear it was an easy fix.
 
Brilliant! Curious to know what you did to remove the original lens. Did it just pop off? Screwdiver to pry it off? Did you preheat the lens with a hair dryer? :thumbsup
 
Thanks guys i'm pretty pleased with it myself! ONEYE - There's hardly any glue holding the original lenses on I literally pulled them straight off with a fingernail! The new lenses are a much more sturdy fitting. It was only a matter of time before I knocked the old ones off dusting it having seen how little was holding them on!
 
Thanks guys i'm pretty pleased with it myself! ONEYE - There's hardly any glue holding the original lenses on I literally pulled them straight off with a fingernail! The new lenses are a much more sturdy fitting. It was only a matter of time before I knocked the old ones off dusting it having seen how little was holding them on!

Ok. :thumbsup I did this with the one I terminated (custom BD), I put a green lens in it. I don't have it set up to light up, but if it's ok with you, I'll post a picture of it here tomorrow. I used green just to give it a different appearance.
 
Building up a kit now and thanks for the tip! These little things are great. Just grabbed up a few pairs at my local store. :thumbsup
 
can anyone see the pics in this old thread?i wanna update my HCG Terminator Bust,too.
 
Back
Top