superjedi
Sr Member
Hi all,
I actually had time to build a model recently!
This is the 1/72 scale Eagle transporter from Space 1999. It's from MPC/Round2 (I think Round2 partnered on this one) and the finished Eagle measures 14" in length.
It's waaay more detailed than the older MPC kit, and the molding is really clean and sharp. Here's the parts layout.
The build is pretty straightforward. The only semi-complicated step was the assembly of the engine frame. It would have helped to have an extra hand or six to hold the small pipes in alignment.
I left things in subassemblies to make painting easier. Still a good number of assemblies, as seen here.
I gave all the parts a coat of Tamiya fine surface primer in gray, and then a couple of lighter coats of the same fine surface primer in white. This gave everything a nice dirty white appearance.
I didn't do much in the way of weathering. Just added a gray pin wash to those corridor sections shown above.
I masked off some random panels and hit the model again with the gray Tamiya primer. This gave me those odd shapes that are seen on the filming models. Here's an example.
After that was done, I hit the model again with a misty coat of the white primer to tone down the contrast of the little gray panels. Then I applied the decals, which are really comprehensive! The sheet includes all the little shapes and markings that were present on the studio models.
Fun note: many of the small markings on the original Eagles were Letraset architectural shapes, such as sinks, toilets, beds, etc.
Everything was given a final clear coat using Testors clear flat and the Eagle was complete. Here are some finished pics.
As a comparison, here's the kit next to the prebuilt 22" Eagle.
This was a fun build! I really enjoyed Space 1999 during its run (yeah, I'm old, haha) and always thought the Eagles were some of the most "realistic" sci-fi ship designs.
I actually had time to build a model recently!
This is the 1/72 scale Eagle transporter from Space 1999. It's from MPC/Round2 (I think Round2 partnered on this one) and the finished Eagle measures 14" in length.
It's waaay more detailed than the older MPC kit, and the molding is really clean and sharp. Here's the parts layout.
The build is pretty straightforward. The only semi-complicated step was the assembly of the engine frame. It would have helped to have an extra hand or six to hold the small pipes in alignment.
I left things in subassemblies to make painting easier. Still a good number of assemblies, as seen here.
I gave all the parts a coat of Tamiya fine surface primer in gray, and then a couple of lighter coats of the same fine surface primer in white. This gave everything a nice dirty white appearance.
I didn't do much in the way of weathering. Just added a gray pin wash to those corridor sections shown above.
I masked off some random panels and hit the model again with the gray Tamiya primer. This gave me those odd shapes that are seen on the filming models. Here's an example.
After that was done, I hit the model again with a misty coat of the white primer to tone down the contrast of the little gray panels. Then I applied the decals, which are really comprehensive! The sheet includes all the little shapes and markings that were present on the studio models.
Fun note: many of the small markings on the original Eagles were Letraset architectural shapes, such as sinks, toilets, beds, etc.
Everything was given a final clear coat using Testors clear flat and the Eagle was complete. Here are some finished pics.
As a comparison, here's the kit next to the prebuilt 22" Eagle.
This was a fun build! I really enjoyed Space 1999 during its run (yeah, I'm old, haha) and always thought the Eagles were some of the most "realistic" sci-fi ship designs.
