8 perf
Sr Member
I recieved my newsletter from Polytek today. New stuff in the silicone industry and all that. One of the products they mentioned was a DVD on making silicone molds. It sells for $5.95 on the web site. www.polytek.com. Turns out an abreviated version is also viewable and downloadable.
http://www.polytek.com/store/mercha...duct_Code=MoldMaking_NewDVD&Category_Code=011
Its an 8 part series about 2-3 minutes long each. It shows the basics of how to do some of the more complex types of mold making. Not really for beginers, but has some great info at any rate. Check it out.
BTW, Along with Smooth-on, Polytek is probably one of the best systems out there covering molding and casting products for many different applications.
http://www.polytek.com/store/mercha...duct_Code=MoldMaking_NewDVD&Category_Code=011
Its an 8 part series about 2-3 minutes long each. It shows the basics of how to do some of the more complex types of mold making. Not really for beginers, but has some great info at any rate. Check it out.
BTW, Along with Smooth-on, Polytek is probably one of the best systems out there covering molding and casting products for many different applications.
