Mal Pistol front sight measurements?

[Hellclaw 01]

The front sight on my mal pistol has cracked off, and I cannot find the broken part anywhere.

I need to build a new piece to replace the original sight, can anyone provide precise dimensions to me for this?

 

[Hellclaw 01]

Come on guys, I know plenty of you have castings of this piece....please help.

 

[Too Much Garlic]

I can probably get you some measurements. Though, will only be in metric format, as that's the only form I know. Is that usable?

Got a picture of the broken off area?

 

[Hellclaw 01]

<div class='quotetop'>QUOTE(NoHumorMan @ Feb 4 2007, 02:27 PM) [snapback]1411753[/snapback]</div>

I can probably get you some measurements. Though, will only be in metric format, as that's the only form I know. Is that usable?

Got a picture of the broken off area?
[/b]

Metric is perfectly fine by me.

Sorry, no pic. It's just the front sight that damaged though, should be pretty easy to fix after I have measurements for it.

Thanks in advance for your help

 

[Too Much Garlic]

Hope this is what you needed, otherwise, please let me know:

 

[Hellclaw 01]

<div class='quotetop'>QUOTE(NoHumorMan @ Feb 4 2007, 03:14 PM) [snapback]1411796[/snapback]</div>

Hope this is what you needed, otherwise, please let me know:


[/b]

Yup, just the top fin is all I need.

Just to double check, since you don't list it specifically, the fin alone is 7mm tall?

Also how thick is the fin, and if you look at the gun from the front end, is the fin the same thickness at the top and bottom, or does it have a taper?

 

[Too Much Garlic]

Oh... okay... well, the fin is 3½ mm wide from top to bottom and the rectangle it sits on is 6½ mm wide... and yes, the fin itself is only 7 mm tall.

 

[Hellclaw 01]

<div class='quotetop'>QUOTE(NoHumorMan @ Feb 4 2007, 03:36 PM) [snapback]1411814[/snapback]</div>

Oh... okay... well, the fin is 3½ mm wide from top to bottom and the rectangle it sits on is 6½ mm wide... and yes, the fin itself is only 7 mm tall.
[/b]

Cool. thanks so much NHM.

 

[Too Much Garlic]

<div class='quotetop'>QUOTE(Hellclaw 01 @ Feb 4 2007, 09:39 PM) [snapback]1411820[/snapback]</div>

<div class='quotetop'>QUOTE(NoHumorMan @ Feb 4 2007, 03:36 PM) [snapback]1411814[/snapback]

Oh... okay... well, the fin is 3½ mm wide from top to bottom and the rectangle it sits on is 6½ mm wide... and yes, the fin itself is only 7 mm tall.
[/b]

Cool. thanks so much NHM.
[/b][/quote]
You're welcome. Glad I could help. :thumbsup