You need the lever for your clamp from Roy at WannaWanga. See first page for link. I think it's listed as Luke V2 Lever or something similar. The V2 lever is different than the lever that comes with the clamp
-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run Luke V2 liightsaber (Second Run) Sign up thread
- Thread starter Anakin Starkiller
- Start date
Inigou
Well-Known Member
I know. I included it as a clamp part. I mean the square screw or anything more.
BTW, please, if anybody have extra stencils, please think on me.
@Mark_P & D3adrock
Some short words regarding the rings/grip on the actual prop (it being in his collection) from the man himself. That's also really where most of the new research for this particular prop starts, too, if anyone else is wanting to learn more about it.
Some short words regarding the rings/grip on the actual prop (it being in his collection) from the man himself. That's also really where most of the new research for this particular prop starts, too, if anyone else is wanting to learn more about it.
Last edited by a moderator:
Thanks for that link! I had read through most of that thread but did not go through every page. Very interesting info there! I have always been torn with the Luke ROTJ sabers as I like the look of them when the grips are evenly spaced and yet I also like the idea of them being accurate to the film, but that is a discussion for the other thread. I knew when I put my name down here I would be very pleased with it either way.
Hi.
Can you please put me down for one as well.
Can you please put me down for one as well.
Check out the first post; the cone knob is included, the mystery "chunk" square is not.
veektohr
Sr Member
You will also need the longer clamp lever. You can snag that at wannawanga.com.
Sent from my iPhone using Tapatalk
D3adrock
Well-Known Member
I listed all the extra parts you need to buy aside from the leaver. The square chunk and a set screw sleeve. You can find the links on post #176
and comparison pics of the different steel types on post #97 of this thread http://www.therpf.com/showthread.php?t=253448&page=4
Last edited:
pnag
Sr Member
It looks like it should all just screw together though? Then the Graflex clamp, board and lever would do it - or have I missed something?
D3adrock
Well-Known Member
The emitter attaches via rod and set screw to the inside of the body. The set screw sleeve is for the rod inside of the body to keep the emitter on. You could use a piece of tape or something to keep the emitter on but I think a set screw sleeve is a more elegant solution.
pnag
Sr Member
Ah, got you - I'll have to order one of those I guess, but there's part that needs to be tapped, right? I'd be terrified I'd screw it up!
D3adrock
Well-Known Member
Yep, theres also a part that needs to be tapped. I bought a tap just for this project off of ebay.
pnag
Sr Member
I wonder will anyone offer a service for this aspect of things? Kits and filler are my thing, and can hang a shelf - tapping metal? Don't really know the first thing about it!
D3adrock
Well-Known Member
It's the opposite for me. I can drill and tap and join. But painting and glueing are not my thing.
pnag
Sr Member
newmagrathea
Sr Member
Just curious how many sleeves are need 1, 2, more than that? Also where do they go, I've been looking at the saber images and haven't figured it out?
D3adrock
Well-Known Member
You only need one, I was just listing choices of materials you could choose, brass, steel, stainless, etc. Doesn't really matter, just though some people might like a choice.
It goes on the other end of the steel rod opposite of the emitter.
newmagrathea
Sr Member
Is the part even visible?
D3adrock
Well-Known Member
No, it goes one the inside, just to keep the emitter attached.
Similar threads
