Modified TCSS Luke Skywalker Return of the Jedi MHS lightsaber hilt. This hilt is empty and ready to be installed with electronics.
Included: (Not all parts are shown)
-Roman Props V2 1" blade plug
-7/8" Copper heatsink for Tri-Cree installation. The center hole has been threaded with a 10-32 thread pitch and non conductive Nylon screws are included with the kit.
With some modification to the screw it will secure the heatsink into the blade holder if you wish to add an in hilt LED and allow the wires to feel through to the body of the saber.
-Tri-Cree XP-E2 Green, Green, Amber LED with Lens
-Chassis with removable speaker can
-Pin connectors for speaker
-Premium Speaker
-21700 5000mA Protected Li-Ion Battery
-Non vented pommel without Tri ring
I've modified this hilt and added a custom made tri ring which has been weathered. The hilt has minor wear marks and some weathering on the pommel cubes and lower hilt.
Gray Styrene strips have been glued and painted under the brass rail section of the control box and Red and Green triangle lenses have been installed to be illuminated once electronics are installed.
The activation plate is held in place with magnets and slides into the brass rail section and can be removed to expose the included upgrade PCB with recharge port so you won't need to unthread the pommel to charge your saber if you install the hilt.
I'm including a few additional parts to aid installation but they're less interesting to look at so I'm not photographing them.
Price includes PP fees and shipping within the U.S.
Preferably U.S. shipping only.
Included: (Not all parts are shown)
-Roman Props V2 1" blade plug
-7/8" Copper heatsink for Tri-Cree installation. The center hole has been threaded with a 10-32 thread pitch and non conductive Nylon screws are included with the kit.
With some modification to the screw it will secure the heatsink into the blade holder if you wish to add an in hilt LED and allow the wires to feel through to the body of the saber.
-Tri-Cree XP-E2 Green, Green, Amber LED with Lens
-Chassis with removable speaker can
-Pin connectors for speaker
-Premium Speaker
-21700 5000mA Protected Li-Ion Battery
-Non vented pommel without Tri ring
I've modified this hilt and added a custom made tri ring which has been weathered. The hilt has minor wear marks and some weathering on the pommel cubes and lower hilt.
Gray Styrene strips have been glued and painted under the brass rail section of the control box and Red and Green triangle lenses have been installed to be illuminated once electronics are installed.
The activation plate is held in place with magnets and slides into the brass rail section and can be removed to expose the included upgrade PCB with recharge port so you won't need to unthread the pommel to charge your saber if you install the hilt.
I'm including a few additional parts to aid installation but they're less interesting to look at so I'm not photographing them.
Price includes PP fees and shipping within the U.S.
Preferably U.S. shipping only.
