Looper Silver and Gold bars

[LukeyMagic]

Hey im looking to create my own Looper bars of silver and gold, but cant find the dimensions of the bars anywhere?

I was hoping someone had the measurements that they could give, that would be awesome I'm looking to make them out of metal and get the gold bar flash gold plated with 1 micron of gold and then maybe lacquer it as the 1 micron will rub off with a polishing cloth.

I'm new here also so i apologise if I've offended, written this in the wrong place or broken any codes before hand!

Luke

 

[breen2057]

theres a member selling metal bars cast from a screen used one in the junkyard. you could pm him about it View Profile: kevinericon - the RPF. he's also thinking about doing the gold bar in the future.

 

[LukeyMagic]

Thanks a lot, will check these guys out.

 

[LukeyMagic]

OK got some measurements and reference material, this is what I've come up with for the Gold Bar.........



Does this look right?

 

[skeg]

They are around 19mm thick. So your a tad out. Ive got the dimensions on my computer, but I'm about to head to bed. I'll post them tomoz arvo if no one else does by then.

Great work mate. I'm also scratch building them now ..

Sent from my PadFone

 

[LukeyMagic]

They are around 19mm thick. So your a tad out. Ive got the dimensions on my computer, but I'm about to head to bed. I'll post them tomoz arvo if no one else does by then.

Great work mate. I'm also scratch building them now ..

Sent from my PadFone

I got the measurements from kevinericon, he kindly gave me the details of the castings he was making of the silver bars from the film. In the images from the film the Gold Bars looks the same size but thinner, just guessed it really but now I look at it maybe thicker is needed!

I look forward to seeing your images!

 

[Risu]

The golden bars are flatter and wider than the silver ones. The silver bars come out at .75" thick.

 

[LukeyMagic]

The golden bars are flatter and wider than the silver ones. The silver bars come out at .75" thick.

These are the measurements I've got for the silver.
116 mm x 52 mm x 20 mm

So your .75 is 19 mm so pretty close.

I'm gonna sit down and watch the film again and try and get some screenshots of the gold with some sort of size reference.

Cheers for your help guys!

 

[Risu]

Yea, not like I measured a screen used bar or anything. Oh wait...

 

[laellee]

Risu, it's like, it's like you just KNEW...

 

[LukeyMagic]

No need be like that. I was confirming my measurements that I was given against yours for the SILVER bar and I was 1 mm out on the thickness.

I want to make the GOLD bar, hence watching the film again and comparing measurements of the SILVER to the GOLD with these current measurements.

From what I gather no one has a GOLD bar for measurements, as they didn't make promotional bars for them.