Looking for pre-assembled , ready to install saber electronics kit - light & sound

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

woodywaverider

New Member
LGT saber store on AliExpress sell their cores, the base lit isn't the best, but imo it is one of the best value for costs v functionality and also has eco smooth swing now. They also do a Proffie Nano pixel core which is fully customisable if you're not on a budget.
 

13doctorwho

Sr Member
RPF PREMIUM MEMBER
Won’t it depend on what lightsaber you’re building? How much internal space you have and where it’s located will effect the positioning of the electrical parts. Like a Graflex versus a thin neck would be laid out differently.
 

woodywaverider

New Member
Won’t it depend on what lightsaber you’re building? How much internal space you have and where it’s located will effect the positioning of the electrical parts. Like a Graflex versus a thin neck would be laid out differently.
The chassis is 1” the same size as most blades.

the led/pcb, switch and speaker all connect to the sound board with 2.1mm jst quick connectors, so the wires can be extended by using an extra connector or soldering in extra wires

the chassis is abs so it can be easily cut down or removed completely.

I’ve modified quite a few of these for my own scratch built hilts. I’ve added crystal chambers with accent leds and changed the switches from the anti vandal to a tactile.

you could get all the components individually from the custom saber shop and ask them to pre wire them, but that will be more expensive.

These are pretty cheap so are worth a look
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top