RPF PREMIUM MEMBER
Deposit sent! Thank you so much! I can't wait!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
I know it may be a bit of a pita, but if you have any tips better shown than written any small tutorial videos of you doing certain steps or anything would be awesome! We will need the biggest detailed pics we can find also to go by. Sorry, I haven't been back over this thread in a LONG time. Excited this is happening, thanks!I don't have picture yet, but here's a list of what is included...
1 - Chrome-Plated Metal Glaive Body (w/ Green & Red Resin Inlays)
5 - Chrome-Plated Metal Blades
2 - 35mm Clear Swarovski Crystals
10 - 5mm Red Swarovski Crystals
What you will need to buy to finish Glaive...
Gold Leaf Adhesive Pen
Gold Leaf (This particular Gold Leaf is on sheets of tissue, making it very easy to apply! Place it on the sticky surface you applied with the Adhesive Pen and it peels right off!)
Testor's White Gloss Enamel Model Paint (Plus, thin paint brushes)
Testor's Paint Thinner
Precision Tip Cotton Swabs (These are good for adding a little paint thinner and cleaning up small mistakes in tight corners, which may happen!)
Don't worry! I will baby-step you guys through the whole process! I'm not going to just sell you kit and say 'Goodluck'...I know it may be a bit of a pita, but if you have any tips better shown than written any small tutorial videos of you doing certain steps or anything would be awesome! We will need the biggest detailed pics we can find also to go by. Sorry, I haven't been back over this thread in a LONG time. Excited this is happening, thanks!
If you've already answered this already, I apologize... it's a long thread. Do you have any recommendations for NOT permanently affixing the blades? I mean, I'm in on this run regardless (already put in the deposit), but I'd love to have a way to display it with the blades secure, but also have the prop work without the blades attached.Don't worry! I will baby-step you guys through the whole process! I'm not going to just sell you kit and say 'Goodluck'...
I'll make diagrams of what gets painted white and what gets gold!
I'll go over every step and guide you along the way, and answer every question you have as you work on your kit.
You can add a little tape to the base of the blade to make them fit snug without gluing them.If you've already answered this already, I apologize... it's a long thread. Do you have any recommendations for NOT permanently affixing the blades? I mean, I'm in on this run regardless (already put in the deposit), but I'd love to have a way to display it with the blades secure, but also have the prop work without the blades attached.
Please add me to the list. Thanks!"KRULL"
~ The GLAIVE ~
This is a new run of the "GLAIVE" from the 80's Cult-Classic film "KRULL"!!!
I partnered up with my friend Bruce, who is amazing at 3D modelling, to help bring to life the most accurate representation of the "Glaive" to date!
Measurements and details were meticulously replicated from photos of the original prop!!!
So, you are getting an extremely accurate casting of the original Glaive, and you can't get any closer to owning the original prop than owning this beautiful replica.
Static display piece only, with no retracting blades!
THIS WILL ONLY BE OFFERED AS A KIT!!!
The KIT includes the Chrome-Plated Bronze Metal Body w/ Blades, Green & Red Resin Inlays already applied, and 12 Swarovski Crystals!!!
You will only have to paint the 'White' accents, apply the 'Gold Leaf' on the Runes, and glue on the Crystals and Blades!
I would offer to do it, but it is very time consuming and too much for me offer at an affordable price...
...but, I am going to apply the Red and Green Resin Inlays to make it a little easier!
To finish this kit, it really doesn't require much skill... It's very easy, and just a lot of time involved for paint and glue to dry in stages...
I've done the hardest part for you, by pouring the Green & Red Resin Inlays.
Plus, I will provide guidance and instructions on how to complete the Glaive as well!
Every detail is crisp and exactly like the original! As you can see from the photos below, you can see the details match the screen captures exactly!
Dimensions: About 14 inches in diameter
Price: (Shipping NOT Included!)
Estimated to be between $425 - 450 USD. Depending on what shipping from the factory will be...
A complete ‘Finished’ Glaive, will be $2,000!
Post here if you would like to be added to the Interest List! I'll keep this thread updated as this project progresses with the prototype and pricing!
3. the Pawn
11. Lost in Trek
19. major payne
28. BlindVoyeur (x3)
33. el toro
43. Eternal Collect
54. Darth Milo
62. Digital Mayhem
110. Movie Magic
118. Iron Stark
View attachment 1579653
View attachment 1579654
View attachment 1579655
View attachment 1025449
View attachment 1025393
View attachment 1025394
View attachment 1025395
View attachment 1025396