Jurassic Park props.

Discussion in 'Replica Props' started by CTF, Nov 17, 2005.

  1. CTF

    CTF Sr Member

    Trophy Points:
    1,951
    I've been re-watching the Jurassic Park trilogy lately, mainly Jurassic Park and The Lost World, as I prefer them to the third. (Actually, I've only watched JP3 a couple of times since I brought it.) Jurassic Park might just be my favourite movie of all time. - Yup, even more so than any of the OT. I first saw it when I was 12 on opening day here in NZ, everyone knew what to expect as way back in the day a NZ release was at least a month behind everywhere else. :unsure Anyway, it is one of the only films that has really made me go 'Woah.' in the cinema. The first was ROTJ when I was a youngster (I can only remember bits and pieces), then T2. (I still have no idea how a 10 year old got into that. :p) I'm a Spielberg nut anyway, but I really love this film, so I'm interested in getting some props from it.

    I'm only really after the Cryo-can, Hammond's cane and the tour brochure. I'm pretty sure Rylo made the first two, and Ash Frank made the JP tour brochure, is this right? I'm sure (but I could be wrong) that I've seen two versions of the brochure... Anyone?

    Are there any other cool props out there? I see a Raptor claw on eBay from time to time. Is there anything sourced from original JP props?

    Thanks.
     
  2. SurferGeek

    SurferGeek Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    2,246

    You are correct on the Rylo props as well as the Ashfrank brochure. As for others? I've seen a nice JP Hardhat circulating and someone was attempting to recreate the JP NVGs but nothing came of it. I'm sure there are a few others but I can't recall them.
     
  3. Montagar

    Montagar Legendary Member Community Staff

    Trophy Points:
    5,325
  4. Apollo

    Apollo Legendary Member RPF PREMIUM MEMBER

    Trophy Points:
    5,035
    Try phillippe. He may have some Cryo-Cans left over as well as Canes
     
  5. moviebuff5

    moviebuff5 Well-Known Member

    Trophy Points:
    942
    There is the radio. The battery is too large on mine, but it was the best I could do on a budget.

    [​IMG]
     
  6. Prop Runner

    Prop Runner Sr Member

    Trophy Points:
    1,230
    There were licensed wall-mounted Velociraptor heads a few years back, but I can't recall who produced them. Illusive Concepts? Ruby's? Don Post?

    Of course there are some nice scale dino statues floating around, some are priced only for the rich...

    Then you have the Spas 12 that Robert Muldoon carried...

    [​IMG]

    Somebody really needs to make a good night vision goggles replica.

    - Gabe
     
  7. CTF

    CTF Sr Member

    Trophy Points:
    1,951
    Cool, very quick replies. :D

    I've shot a couple of people some PM's...

    I was just looking at the vehicle ID tags in that thread, very cool.

    OK, I may sound like a n0oB here, but what's an NVG? :angel

    I can't find any info on the raptor heads that Gabe mentioned? I'm curious... Anyone?

    I'd love to see some pics of the SS dinos, I'll have a look in the other board, but please post some pics if you have 'em.

    Chur.
     
  8. moviebuff5

    moviebuff5 Well-Known Member

    Trophy Points:
    942
    NVGs are the Night Vision Goggles also mentioned by Prop Runner.
     
  9. CTF

    CTF Sr Member

    Trophy Points:
    1,951
    :confused Now why didn't I know that? Heh, it was a real early morning start today. :p
     
  10. allosaur176

    allosaur176 Sr Member

    Trophy Points:
    2,205
    I have a pull from the original molds of the baby rex from TLW, and also of a compy.. Other than that, I have all the basic replicas... Here are mine

    Jurassic Park replicas
     
  11. Apollo

    Apollo Legendary Member RPF PREMIUM MEMBER

    Trophy Points:
    5,035
    NICE Collection allosaur.. :)
     
  12. Terminator Crazy

    Terminator Crazy Well-Known Member

    Trophy Points:
    556
    I have a few..Including the cane.. Shoot me a PM or mail.. :)
     
  13. Jimbo890

    Jimbo890 Well-Known Member

    Trophy Points:
    941
    Yes, the Franchi SPAS-12. Gotta love that one. This gun has been used in so many films its not funny. Terminator, Aliens [well, parts of it], JP, just to name a few.
     
  14. luke moonwalker

    luke moonwalker Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,041
    Here is my meager collection :)

    I've got a helmet, brochure, and Cyrocan...

    [image]http://home.rochester.rr.com/jaypics/DSCF0204.jpg[/image]
    [image]http://home.rochester.rr.com/jaypics/DSCF0207.JPG[/image]

    -Jay
     
  15. Lynn TXP 0369

    Lynn TXP 0369 Sr Member

    Trophy Points:
    1,681
    Horizons viynl kits made from the Studio maquttes. A cool Helmet with a JP decal on the front.

    Lynn
     
  16. The Plasma Infusion

    The Plasma Infusion New Member

    Trophy Points:
    2
    Icons made the Raptor Claw & Egg years back.

    And it was a independant artist Joe Malys who did the Raptor bust. Saw it at a show a few years ago.......It was made to look like it was breaking through a wall complete with a companion claw piece to be mounted a couple feet away from the head.


    Hey. I found IT on Ebay.. (I feel like the new commercial) :p


    Bill P.
     
  17. howlingwind13

    howlingwind13 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,586
    Hey Luke Moonwalker...what was the exact brand and color of the hard hat? Thinking about making one.
    mike
     
  18. CTF

    CTF Sr Member

    Trophy Points:
    1,951
    Woah. There is some real nice stuff in people's collections, especially you Allosaur.

    So are the Horizon kits directly from the ILM/SWS maquettes?

    And thanks for the PM's, replied to all. :)
     
  19. allosaur176

    allosaur176 Sr Member

    Trophy Points:
    2,205
    Thanks alot... I still have afew items I have yet to take pics of, Hammond's Cane, the JP brochure and a screen used Rex tooth from JP
     
  20. Lynn TXP 0369

    Lynn TXP 0369 Sr Member

    Trophy Points:
    1,681
    Yes, they are direct casts from the ILM/SWS maquettes.
    I remember that being a big deal about these when they came out 12 years ago.
    Lynn
     
  21. Ashfrank

    Ashfrank New Member

    Trophy Points:
    16
    about the NVG...

    I have attached some pics. I think if I got a real thick block of foam I could get a general shape for it all and then start from there. Any other ideas for how to make them?

    [​IMG]

    [​IMG]

    --Ash
     
  22. Tatooine_Todd

    Tatooine_Todd Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,041
    Don't know if this counts, but I've had this guy forever.

    [​IMG]

    Made by Cinemacast in Japan, all resin and very cool.

    Todd

    P.S. Just noticed allosaur176 has the same statue.
     
  23. philippes

    philippes Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,341
  24. PHArchivist

    PHArchivist Master Member

    Trophy Points:
    4,015
    Is anyone making the orange hard hats anymore...? I need one...
     
  25. allosaur176

    allosaur176 Sr Member

    Trophy Points:
    2,205

    I could use one also
     
  26. Mike J.

    Mike J. Master Member RPF PREMIUM MEMBER

    Trophy Points:
    3,355
    I'd like to see someone try the stun guns the guards have in the opening scene.


    -Mike
     
  27. howlingwind13

    howlingwind13 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,586
    Also looking for a hard hat.
    mike



     
  28. houdiniguy

    houdiniguy Sr Member

    Trophy Points:
    1,230
    :D :D :thumbsup
     
  29. Prop Runner

    Prop Runner Sr Member

    Trophy Points:
    1,230
    I recently got this el-cheapo hard hat at a large hardware chain - it's the only model they had. Is it screen-accurate? Could somebody please post a grab from the film? I'd also like to know the Pantone orange number and the the JP logo if anyone has it... If we can't find the guy who did a run of these, by God, let's do it ourselves. :p

    [​IMG]

    The raptor claw, by the way, was recently scored on eBay (I was the only bidder). It's not screen-accurate, but for $19.99, it's a * good facsimile. The casting is superb and the detailing first rate. Seller is from Honk Kong, and he also offers lots of Predator recasts. Don't know the guy's story, but he delivers and is affordable. His eBay ID is dsontoy and he's got a couple of claws up right now, actually. :)

    - Gabe
     
  30. Mike J.

    Mike J. Master Member RPF PREMIUM MEMBER

    Trophy Points:
    3,355
    [​IMG]


    -Mike
     
  31. Prop Runner

    Prop Runner Sr Member

    Trophy Points:
    1,230
    Thanks, Mike. :)

    Well, mine's obviously the wrong type... Any chance these were shown in profile? If so, Mike, please help out one more time. :D

    - Gabe
     
  32. allosaur176

    allosaur176 Sr Member

    Trophy Points:
    2,205

    Yes, they show the profile shots when they are trying to stun the raptor, they seem to be totally smooth though
     
  33. Imahomer

    Imahomer Well-Known Member

    Trophy Points:
    941
    Interesting thread, more so since I've got a few of the mentioned props and will probably be listing them on Ebay soon. Including the helmet.
     
  34. Mike J.

    Mike J. Master Member RPF PREMIUM MEMBER

    Trophy Points:
    3,355
    The best I got on hand:

    [​IMG]

    [​IMG]


    -Mike
     
  35. PHArchivist

    PHArchivist Master Member

    Trophy Points:
    4,015
    I'm pretty sure I have a pic of the stun gun from Planet Hollywood.

    Stay tuned...
     
  36. Prop Runner

    Prop Runner Sr Member

    Trophy Points:
    1,230
    Imahomer: was it you who first came up with your hard hat replica? I'd be grateful for pics or a tutorial, if you don't mind, unless you would consider offering a few copies? :)

    - Gabe
     
  37. PHArchivist

    PHArchivist Master Member

    Trophy Points:
    4,015
    Let's try this:
     
  38. Prop Runner

    Prop Runner Sr Member

    Trophy Points:
    1,230
    Looks like they used a spear gun - shouldn't be too hard to track down... RESEARCH THREAD... REASEARCH THREAD... :D

    - Gabe
     
  39. Imahomer

    Imahomer Well-Known Member

    Trophy Points:
    941
    [/quote]
    Imahomer: was it you who first came up with your hard hat replica? I'd be grateful for pics or a tutorial, if you don't mind, unless you would consider offering a few copies? :)

    - Gabe
    [snapback]1150091[/snapback]​
    [/quote]


    No, it wasn't me. I got my helmet of the RPF from whoever it was that first came up with them a while back. I'm just thinning out my stuff and will be listing my J.P. items on Ebay soon.
     
  40. Mxlplx

    Mxlplx Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,341
    I believe that it was King Jamie that did the hats.
     
  41. allosaur176

    allosaur176 Sr Member

    Trophy Points:
    2,205

    Yes, this needs to be made, lights and all :D
     
  42. Fetthunter

    Fetthunter Sr Member

    Trophy Points:
    1,231
    Any pics of Hammond's cane? Screen-used, fan-made, or otherwise?
     
  43. Fetthunter

    Fetthunter Sr Member

    Trophy Points:
    1,231
    C'mon. Someone has to have one. :(
     
  44. SurferGeek

    SurferGeek Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    2,246

    Check on the threads that Rylo posted during the cane run and research threads.
     

Share This Page