JFoam Arkham Origin Batcowl build questions


BoosterGoldstar

Active Member
Batman-AO.jpg

Hi guys
I am working on this for a friend. Got a couple questions though,
1-For scaling, I am not sure if I should add the thickness of the foam when scaling
2-Do I need to cut a lot of the pieces with a bevel?

Thanks for any help that you can give me.
 

Bigbat23

Well-Known Member
If you are going to change the scale, then yes you need to add in the thickness of the foam also. I got lucky and didn't have to change the scale at all. As far as beveled edges, I only did it at the nose and the ears.
 
This thread is more than 6 years old.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top