JayCVenlo's - Iron man Mark 43 Avengers 2 - Sintra and Fibreglass Build


ognirg999

New Member
Hi JayCvenlo.. That's an awesome suit u have.. I got motivated working with these after seeing and reading your threads..

I'm planning to use 3mm thick sintra for the whole suit except for fingers (2mm thick)
Is it heavy? Hard to bend?
 

JayCVenlo

Sr Member
RPF PREMIUM MEMBER
Hi JayCvenlo.. That's an awesome suit u have.. I got motivated working with these after seeing and reading your threads..

I'm planning to use 3mm thick sintra for the whole suit except for fingers (2mm thick)
Is it heavy? Hard to bend?

3 MM is the best. I used that too.
Great too hear my build inspired others!
Good Luck!!!
 

mikemakesmovies

New Member
Earlier in your thread I noticed you stated that sintra has a bending direction, kinda like cardboard. With cardboard it's easy to find that out, but sintra not so much:lol. So I was wondering how you determined your sintra bending direction. After I saw that I bent my sintra in both ways but I didn see a difference. Thanks in advance!
 

JayCVenlo

Sr Member
RPF PREMIUM MEMBER
Earlier in your thread I noticed you stated that sintra has a bending direction, kinda like cardboard. With cardboard it's easy to find that out, but sintra not so much:lol. So I was wondering how you determined your sintra bending direction. After I saw that I bent my sintra in both ways but I didn see a difference. Thanks in advance!

There ain't that much of a difference, but i had some plates wich definitly had a different feel to it in opposite directions. one direction was smoother than the other.
if it bends smooth in both directions... even better.

Good luck!
 
This thread is more than 4 years old.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top