Keven Skywalker
Active Member
Ken just for letting you know it missed R-backFlap-01 and L-backFlap-01 for download
Iron Man mkIII 3D Print Files - FREE
- Thread starter kenlandrum
- Start date
kenlandrum
Sr Member
All fixed. Sorry 'bout that.
K
*** ALSO, thought I would share this for those who have not read it.
http://gizmodo.com/5530804/interview-the-man-who-really-built-iron-man
Last edited:
Bigturc
Sr Member
kenlandrum .. nice work uploading all these parts for everyone, that's very nice of you!
For all those people that will print at Shapeways, save yourself the trouble and don't use White Strong and Flexible on the small parts!!! It'll be hell to fix afterward when you'll receive them!!! Use Frosted or Frosted Ultra Details on those small parts. Don't even try to mold the WS&F either, I've been there, tried it and it was pure crap and a waste of material and time. Material is too porous and you can't really do anything with it.
Bigger parts can be done in WSF though, you'll just have to hit them with filler primer .. A LOT .. then move on to harden them.
Just thought I'd share this here before people go and try to print these and waste their money on the not right material!
Keep at it kenlandrum.
For all those people that will print at Shapeways, save yourself the trouble and don't use White Strong and Flexible on the small parts!!! It'll be hell to fix afterward when you'll receive them!!! Use Frosted or Frosted Ultra Details on those small parts. Don't even try to mold the WS&F either, I've been there, tried it and it was pure crap and a waste of material and time. Material is too porous and you can't really do anything with it.
Bigger parts can be done in WSF though, you'll just have to hit them with filler primer .. A LOT .. then move on to harden them.
Just thought I'd share this here before people go and try to print these and waste their money on the not right material!
Keep at it kenlandrum.
kenlandrum
Sr Member
Dumontrudisel
Well-Known Member
These look incredible, but Shapeways is telling me this model is 5.25 inches wide. Why is it so big? Is there a way to make it smaller?
Which model?
kenlandrum
Sr Member
All of the models "should" be sized to the movie model. I can check it if you like... which is it?
Dumontrudisel
Well-Known Member
Its this one. Either I messed up reading the dimensions, the scaling is off, or Robert Downer Jr. has large hands
https://www.shapeways.com/model/123...y-models&key=e0bdee950130c3f6380bc6294c63542f
kenlandrum
Sr Member
These measurements are taken from the movie model. RDJ is a small guy, so I assume the 74" tall movie model is bigger for sure. All in all I think the shapeways model scale is on.
kenlandrum
Sr Member
Here are some orthographic renders for anyone wanting to keep things in scale...
enjoy!
enjoy!
IronGemenis
Active Member
your job is amazing, i love this suit men, very good job.
IronGemenis
Active Member
I'm thinking of buying a printer 3d Prusa Iteration 3 20x20x20, to print the forearm as you would? One piece that can not be on this printer, it would be possible that you divided the large pieces in two or three parts, as did Andy with the glove.
and I would love to go see more parts of the armor, so when you think you'll have anything else?
I feel this bad English but I am Spanish and use the google translate
and I would love to go see more parts of the armor, so when you think you'll have anything else?
I feel this bad English but I am Spanish and use the google translate
lzracerswimmer
Member
wow amazing detail ... thanks for all the hard work
Rebo
Well-Known Member
There is a heck of a lot of amazing work going on within this thread, I am amazed it hasn't got a lot more attention.
Are you guys planning on doing the whole suit or just the parts?.
I'd love to see the suit whole broken down into home printable part and could live with a bit of modding to re-assemble larger parts.
Keep up the great work!!
Are you guys planning on doing the whole suit or just the parts?.
I'd love to see the suit whole broken down into home printable part and could live with a bit of modding to re-assemble larger parts.
Keep up the great work!!
Last edited:
lzracerswimmer
Member
Help needed!! Modeling using reference images and editable poly in 3DS max
reference images align in 3Ds ... ie top of eye on the left view is in the same plane as the top of the eye from the front view ...
Problem: when editing the 3D polys ... once the left view matches curvature of the curve, the front side does not match the curve ... why is that? I have used different reference images with same results
reference images align in 3Ds ... ie top of eye on the left view is in the same plane as the top of the eye from the front view ...
Problem: when editing the 3D polys ... once the left view matches curvature of the curve, the front side does not match the curve ... why is that? I have used different reference images with same results
IronGemenis
Active Member
Searching the internet and collected many files. Stl and. Obj the mark three, including many of you who still Kelandrun have placed us here, if you give me permission I do.
Other than that I have as a mark 3 full helmet split into several pieces ready to print, if want I put it here, all files are free on the internet and does not violate the rights of its authors, because I will not charge if not only share you all the hard work of others.
helmet parts print complet - ?? - 4shared - bernardo muñoz
I feel this so horrible English but it is google translator
Other than that I have as a mark 3 full helmet split into several pieces ready to print, if want I put it here, all files are free on the internet and does not violate the rights of its authors, because I will not charge if not only share you all the hard work of others.
helmet parts print complet - ?? - 4shared - bernardo muñoz
I feel this so horrible English but it is google translator
Similar threads
