Iron man mk4 (wip) fingaz mk1 helmet done,MK6 Almost
- Thread starter fingaz
- Start date
-
- Tags
- iron man 2
ROBOSTEVE 0671
Sr Member
Re: Iron man mk4 (wip) fingaz arms cast from fibreglass n painted
Nice work mate, I may just have to pop by and see this pint job and build. It looks stunning! what did you use to paint and apply the weathering if you don't mind me askin. Great work, I love it!
Nice work mate, I may just have to pop by and see this pint job and build. It looks stunning! what did you use to paint and apply the weathering if you don't mind me askin. Great work, I love it!
Re: Iron man mk4 (wip) fingaz arms cast from fibreglass n painted
thanks mate,yr helmet is a beautiful piece of work
thumbsup
thanks,here's a few more
cheers jayjayn,to get it finished first is the plan:loland then possibly a couple of suits for sale?we'll see
hiya deric,thanks mate,i wouldn't try with rattle cans due to the fact as the pressure drops the paint flow becomes a little inconsistent and can create patchiness.but with a spraygun and a lot of patience although tricky 'yes'.putting the silver base on from a gun aint an issue,when it comes to putting the candy on overlap evenly n keep a pen n paper handy to mark down the amount of coats applied to each piece to keep a consistent colour.
thanks steve,the weathering is black stove polish brushed into grooves with a fine brush,left over night then polished off leaving a metallic black finish.the worn areas are silver acrylic or silver rub n buff.the great thing about grate polish or rub n buff are if you over do it ,you can just wipe it off with a drop of panel wipe.
your more than welcome to pop by:thumbsupgive me a few weeks then there'll be more to look at.:lol lol
little updateics as promised
did a waste mold of original chest wasn't happy with a few bits after the finished arms.it was too flat faced,arc recess area not right,etc.(me being to picky:lol)all critique welcome
pulled a urethane cast from the mold then done a bit of tweaking curves etc.need to get the primer flatted, then time to get the molds made for chest n back then cast
original
new chest waiting for primer
primered
simply gorgeous!... stunnig work there man!
thanks mate,yr helmet is a beautiful piece of work
thumbsupthanks,here's a few more
cheers jayjayn,to get it finished first is the plan:loland then possibly a couple of suits for sale?we'll see
hiya deric,thanks mate,i wouldn't try with rattle cans due to the fact as the pressure drops the paint flow becomes a little inconsistent and can create patchiness.but with a spraygun and a lot of patience although tricky 'yes'.putting the silver base on from a gun aint an issue,when it comes to putting the candy on overlap evenly n keep a pen n paper handy to mark down the amount of coats applied to each piece to keep a consistent colour.
thanks steve,the weathering is black stove polish brushed into grooves with a fine brush,left over night then polished off leaving a metallic black finish.the worn areas are silver acrylic or silver rub n buff.the great thing about grate polish or rub n buff are if you over do it ,you can just wipe it off with a drop of panel wipe.
your more than welcome to pop by:thumbsupgive me a few weeks then there'll be more to look at.:lol lol
little update
ics as promiseddid a waste mold of original chest wasn't happy with a few bits after the finished arms.it was too flat faced,arc recess area not right,etc.(me being to picky:lol)all critique welcome
pulled a urethane cast from the mold then done a bit of tweaking curves etc.need to get the primer flatted, then time to get the molds made for chest n back then cast
original
new chest waiting for primer
primered
Surreal Studios
Well-Known Member
rustysprattdesigns
Well-Known Member
Re: Iron man mk4 (wip) fingaz chest mods
Great work on the new chest. You are one talented person. :eek
Great work on the new chest. You are one talented person. :eek
Re: Iron man mk4 (wip) fingaz chest mods
thanks very much stef,keep up the great work:thumbsup
thanks jayjayn
cheers deric,your doin a great job:thumbsup
thanks,n just remember the nxt set made has yr name on it.lol:lol
thanks vshore,talented?a little mad:thumbsup
right,
a little more done.
chest is finally done,did the final clean up,created the ring around the arc with sintra rubbed it to within a mm of its life,n added a few details.
back had to be removed from the old chest,a couple of locating tabs added at the sides,then the details added to each side what id previously missed,seemed a shame to have to primer it again but needs must.
nxt job on cards is to get the molds made:thumbsup
sun was out so i took some more shots of 1 of the arms outdoors,as i dont think the previous pics really did them any justice.im really happy with them,dont think theyd look out of place on mr downey:lol
its gettin there
thanks very much stef
,keep up the great work:thumbsupthanks jayjayn
cheers deric,your doin a great job:thumbsup
I 2nd this! Nice work on the new chest
thanks,n just remember the nxt set made has yr name on it.lol:lol
thanks vshore,talented?a little mad:thumbsup
right,
a little more done.
chest is finally done,did the final clean up,created the ring around the arc with sintra rubbed it to within a mm of its life,n added a few details.
back had to be removed from the old chest,a couple of locating tabs added at the sides,then the details added to each side what id previously missed,seemed a shame to have to primer it again but needs must.
nxt job on cards is to get the molds made:thumbsup
sun was out so i took some more shots of 1 of the arms outdoors,as i dont think the previous pics really did them any justice.im really happy with them,dont think theyd look out of place on mr downey:lol
its gettin there
ROBOSTEVE 0671
Sr Member
Re: Iron man mk4 (wip) fingaz chest back ready for molding
Stone me, that's a hell of paintjob mate. Great looking chest piece too, I'm impressed!
PM on it's way over.
Stone me, that's a hell of paintjob mate. Great looking chest piece too, I'm impressed!
PM on it's way over.
Re: Iron man mk4 (wip) fingaz chest back ready for molding
HOLY $#!^ !!! I was like wow, and then my chin hit the desk!
Looking at the back, I see some spots I need to fix on mine, and I absolutely love the paint job!
Just a weird question, but how much would it cost to achieve the same paint scheme....
I'm nearing the time when I would like to start painting mine and if its possible I would love to have the professional look yours has.
Hats off to your marvelous work!
HOLY $#!^ !!! I was like wow, and then my chin hit the desk!
Looking at the back, I see some spots I need to fix on mine, and I absolutely love the paint job!
Just a weird question, but how much would it cost to achieve the same paint scheme....
I'm nearing the time when I would like to start painting mine and if its possible I would love to have the professional look yours has.
Hats off to your marvelous work!
Re: Iron man mk4 (wip) fingaz chest back ready for molding
thanks steve
thanks deric,
the honda candy red is £27.50 1/2 litre n needs to go over a silver basecoat £24 1/2 litre. gold £13 1/4litre,2k lacquer £15 litre,dont know how it prices out stateside
had a few pms rgd sanding tips for edges n recessed parts,so a little tip which may make life easier,i us from time to time for swage lines on cars
sticky backed foam strip :thumbsup
cut it,shape it.
a mocked piece from sintra
foam
build the foam to rqd depth
spread the filler on with firm strokes removing air pockets
then remove leaving a good recess or built up area
clean edges with a bit of 180 grit,hope this helps:thumbsup
thanks steve
thanks deric,
the honda candy red is £27.50 1/2 litre n needs to go over a silver basecoat £24 1/2 litre. gold £13 1/4litre,2k lacquer £15 litre,dont know how it prices out stateside
had a few pms rgd sanding tips for edges n recessed parts,so a little tip which may make life easier,i us from time to time for swage lines on cars
sticky backed foam strip :thumbsup
cut it,shape it.
a mocked piece from sintra
foam
build the foam to rqd depth
spread the filler on with firm strokes removing air pockets
then remove leaving a good recess or built up area
clean edges with a bit of 180 grit,hope this helps:thumbsup
paullaurie
New Member
Re: Iron man mk4 (wip) fingaz chest back ready for molding
hi mate some one has sent me the pdf for the helmet but i need the pdf for the suit i m 5ft 6in though can you email the pdf for the suit ,please mate i ll send you the email soon
hi mate some one has sent me the pdf for the helmet but i need the pdf for the suit i m 5ft 6in though can you email the pdf for the suit ,please mate i ll send you the email soon
Re: Iron man mk4 (wip) fingaz chest back ready for molding
pep files found here
http://www.therpf.com/f24/robo3687s-iron-man-pep-files-sd-war-machine-links-page-73-a-88147/
pep files found here
http://www.therpf.com/f24/robo3687s-iron-man-pep-files-sd-war-machine-links-page-73-a-88147/
Re: Iron man mk4 (wip) fingaz chest back ready for molding
Thanks, I will look into everything and I might shoot you a PM if I have any further questions!
Thanks, I will look into everything and I might shoot you a PM if I have any further questions!
Surreal Studios
Well-Known Member
Re: Iron man mk4 (wip) fingaz chest back ready for molding
Fantastic paint job!!
Fantastic paint job!!
AnakinChris
New Member
Re: Iron man mk4 (wip) fingaz chest back ready for molding
GREAT JOB~~~
GREAT JOB~~~
Blackdynamo2
Well-Known Member
Re: Iron man mk4 (wip) fingaz chest back ready for molding
Fingaz, Dude! you are kickin A$$! I am I love :love Beat me over the head... :behave I need to mold this thing i got.... The paint Job Is the best ive seen Period!....I Love it all. Delray.
Fingaz, Dude! you are kickin A$$! I am I love :love Beat me over the head... :behave I need to mold this thing i got.... The paint Job Is the best ive seen Period!....I Love it all. Delray.
