Limited Run Iron Man Mark 45 Helmet from 3d Printed Master ***TAKING ORDERS***

drumguy560

Well-Known Member
RPF PREMIUM MEMBER
Hey folks! This thing is finally ready to mould, and ready for a run to begin. It is almost 100% screen accurate, and was made according to the renders by Josh Herman. Here are some renders of the 3d model.

1.jpg 2.jpg 3.jpg 4.jpg

And presenting! The final piece! Ready to mould!

_DSC7926.jpg _DSC7915.jpg _DSC7918.jpg _DSC7923.jpg _DSC7922.jpg

The helmet is split into the "normal" Iron Man style pieces, like so...

_DSC7925.jpg

The helmet fits me, with a 25" head, but is VERY snug. I'd say it will comfortably fit 24" and below.

I am looking for $200 for a raw cast, and am looking to have half paid up front as a deposit, to acquire materials.

I will paint it as well for an extra $100, and will add LED's and electronics for another $100.

So who's in?!?!

- The Digital Armorer
 
Last edited:

STARLORD13

New Member
Re: Iron Man Mark 45 Helmet from 3d Printed Master

What is the price of your ant man and what would be the price of a fully painted one of these? any pics?
 

drumguy560

Well-Known Member
RPF PREMIUM MEMBER
Re: Iron Man Mark 45 Helmet from 3d Printed Master

What is the price of your ant man and what would be the price of a fully painted one of these? any pics?

the thread is located here http://www.therpf.com/f75/ant-man-helmet-run-go-ready-take-payments-first-post-updated-234653/

IMG_5970.JPG

the helmet is coming together! This is a little pic of my first prototype of the helmet, need to tweak the 3d model a little bit, and then re print a V2. Should be coming up soonish!
 

reelprops

Master Member
RPF PREMIUM MEMBER
Iron Man Mark 45 Helmet from 3d Printed Master ***NEW RENDERS PAGE 1***

That's the Mk 45?

Reel
 
Last edited:

drumguy560

Well-Known Member
RPF PREMIUM MEMBER
Re: Iron Man Mark 45 Helmet from 3d Printed Master ***NEW RENDERS PAGE 1***

@Ick12345 - currently I'm only looking to sell fully painted.

Thanks!
 

JKRIB

Sr Member
RPF PREMIUM MEMBER
Re: Iron Man Mark 45 Helmet from 3d Printed Master ***NEW RENDERS PAGE 1***

Yeah. Looking great!

What size head will this fit? Also, will the faceplate be remove-able like the last render pic?
 
This thread is more than 4 years old.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top