IRON MAN Mark 4 and 6 Build - Video Update Page 6
- Thread starter STEALTH
- Start date
-
- Tags
- iron man 2
ALucard92kb
New Member
Re: STEALTH's Iron Man Mark IV/VI Build
The Regard Stels, your work really good, from for your video I has solved to do its suit. Has Collected I from paperboard suit, got around to glassing the whole suit on the inside, and has outside covered the polyester resin, but don't care paperboard remained soft, what do hard? Strong? outside not to want to consolidate, will lose beauty. Beforehand thank you for help.
PS, excuse me for my english, I use through translator.
The Regard Stels, your work really good, from for your video I has solved to do its suit. Has Collected I from paperboard suit, got around to glassing the whole suit on the inside, and has outside covered the polyester resin, but don't care paperboard remained soft, what do hard? Strong? outside not to want to consolidate, will lose beauty. Beforehand thank you for help.
PS, excuse me for my english, I use through translator.
Gonmun
New Member
Re: STEALTH's Iron Man Mark IV/VI Build
Amazing work Stealth. I liked your page on Facebook as well and have been enjoying following your progress on this build and it's inspired me to look into starting my own work on some Iron Man armour as well. Pretty soon Canada will have it's own legion of Iron Men!
I've started work on some test pieces for sizing and what not and think I might try the cardboard route as you have as it would appear to be a bit sturdier then foam. If you don't mind me asking though, what did you use for your fibreglass phase? I'm in Moncton, NB so I'm assuming I'll have access to the same sort of stuff but was just curious as to what it was you used as it seemed to turn out really well. Also, nice idea with the pigment. That was a concern I had with regards to tracking what had been done and again you've proved to be innovative when it came to the work.
Amazing work Stealth. I liked your page on Facebook as well and have been enjoying following your progress on this build and it's inspired me to look into starting my own work on some Iron Man armour as well. Pretty soon Canada will have it's own legion of Iron Men!
I've started work on some test pieces for sizing and what not and think I might try the cardboard route as you have as it would appear to be a bit sturdier then foam. If you don't mind me asking though, what did you use for your fibreglass phase? I'm in Moncton, NB so I'm assuming I'll have access to the same sort of stuff but was just curious as to what it was you used as it seemed to turn out really well. Also, nice idea with the pigment. That was a concern I had with regards to tracking what had been done and again you've proved to be innovative when it came to the work.
Re: IRON MAN Mark IV Build - Video Update Page 5
Just out of curiosity, did you B-Boy this cardboard before beginning the build?
Just out of curiosity, did you B-Boy this cardboard before beginning the build?
STEALTH
Sr Member
Re: IRON MAN Mark IV Build - Video Update Page 5
haha, I probably had at some point before I used it
haha, I probably had at some point before I used it
Peejfro
Sr Member
STEALTH
Sr Member
Re: IRON MAN Mark IV Build - Video Update Page 5
got a bit more filling/sanding completed. Still more to go.
Looking good though.
Thanks man!
got a bit more filling/sanding completed. Still more to go.
Looking good though.
IceTea1983
Member
Re: IRON MAN Mark IV Build - Video Update Page 5
Will you keep the abs as one solid piece or will the sections be made to overlap and allow flexibility for the wearer?
EDIT: abs is not meant to be an acronym, but shorthand for abdominal muscles
Will you keep the abs as one solid piece or will the sections be made to overlap and allow flexibility for the wearer?
EDIT: abs is not meant to be an acronym, but shorthand for abdominal muscles
Last edited:
STEALTH
Sr Member
Re: IRON MAN Mark IV Build - Video Update Page 5
They're just going to be solid for as these are masters. Mobility in the stomach is not a concern as I want to keep the look. This isn't a cosplay. I don't need to really bend and such.
They're just going to be solid for as these are masters. Mobility in the stomach is not a concern as I want to keep the look. This isn't a cosplay. I don't need to really bend and such.
GhostMinion
Sr Member
Re: IRON MAN Mark IV Build - Video Update Page 5
WOW! Looks freakin' AWESOME :thumbsup
WOW! Looks freakin' AWESOME :thumbsup
Similar threads
