Helagaks Iron man Mark 42 ALL FILES RELEASED!!

Re: Helagaks Iron man Mark 8/42 model and Pepakura files. COMPLETE RE BUILD!! new fil

Finally got the Back done herea V1 & V2

back.png
 
Re: Helagaks Iron man Mark 8/42 model and Pepakura files. COMPLETE RE BUILD!! new fil

SOUTHPAW said:
What material is it? Foam?
Click to expand...

ya its made from foam next ill paper mache the insides then body filler the outside to get it hard and smooth its first time doing it this way but thought i give it a shot i want a ridged suit so used the foam method as its faster to build it that way
 
Re: Helagaks Iron man Mark 8/42 model and Pepakura files. COMPLETE RE BUILD!! new fil

jamesheneghan said:
ya its made from foam next ill paper mache the insides then body filler the outside to get it hard and smooth its first time doing it this way but thought i give it a shot i want a ridged suit so used the foam method as its faster to build it that way
Click to expand...

I keep wanting to try a foam build, then make silicone molds of it to cast rigid parts. I had some really good luck using silicone caulking to copy parts of my Mk 3 armor. The heat is killing me using bondo and rondo on the paper parts.
 
Re: Helagaks Iron man Mark 8/42 model and Pepakura files. COMPLETE RE BUILD!! new fil

ShadoWorx said:
I keep wanting to try a foam build, then make silicone molds of it to cast rigid parts. I had some really good luck using silicone caulking to copy parts of my Mk 3 armor. The heat is killing me using bondo and rondo on the paper parts.
Click to expand...

foam building is easy and fast(depending on the piece too 14 hrs for chest and a day roughly for the back) and if a mistake is made its easy to fix i would love to try making molds and casting but one i dont have the money two i dont have the time have you got a shed to use the bondo with a respirator and keep the door open fumes would be gone in a couple of hours
 
Re: Helagaks Iron man Mark 8/42 model and Pepakura files. COMPLETE RE BUILD!! new fil

jamesheneghan said:
foam building is easy and fast(depending on the piece too 14 hrs for chest and a day roughly for the back) and if a mistake is made its easy to fix i would love to try making molds and casting but one i dont have the money two i dont have the time have you got a shed to use the bondo with a respirator and keep the door open fumes would be gone in a couple of hours
Click to expand...

A shed? I work in a covered carport. It's 90-95 degrees outside, a shed would be working in an Easy-Bake oven. Bondo sets faster at higher temps, I would need a large shop with exhaust fans and A/C to beat those temps. Its not very expensive to mold using cheap silicone caulk and glycerine. The tubes are cheap at Walmart I did a Mk 3 shin with 3 tubes and the pull was very clean.
 
Re: Helagaks Iron man Mark 8/42 model and Pepakura files. COMPLETE RE BUILD!! new fil

Hi, I read all the pages and the development of this project, I'm completely amazed, and I wanted to ask a kindness, some files can not be downloaded, I ask you to put the latest working links, as these: im_mk42_v3_shoulder_by_helegak_foam_by_ironmaided.pdo and others

:) :) :) :) Thank you very much in advance !!!! :) :) :) :)
 
Re: Helagaks Iron man Mark 8/42 model and Pepakura files. COMPLETE RE BUILD!! new fil

bicep1.jpgbicep2.jpg

finally got the new biceps done must say loving these new files cant wait for the rest :)
 
Re: Helagaks Iron man Mark 8/42 model and Pepakura files. COMPLETE RE BUILD!! new fil

Glad you are enjoying them! :)
It seems that some jerk pissed off ironmaided. So he left. :(
So I had to take matters into my own hands...
Here is a teaser....
20130719_130740.jpg


The boots are about done. I had most of the sub suit done yesterday but I closed the program without saving!! >_< so I lost about 4 hours of modeling. Work has been hell this week, hence the low productivity... I'll post the abs pdo on the front page some time today. =D
 
Re: Helagaks Iron man Mark 8/42 model and Pepakura files. COMPLETE RE BUILD!! new fil

Well to be fair ironmaided got mad and left over nothing.
 
Re: Helagaks Iron man Mark 8/42 model and Pepakura files. COMPLETE RE BUILD!! new fil

Helagak said:
Glad you are enjoying them! :)
It seems that some jerk pissed off ironmaided. So he left. :(
So I had to take matters into my own hands...
Here is a teaser.... http://i110.photobucket.com/albums/n91/helagak/20130719_130740.jpg

The boots are about done. I had most of the sub suit done yesterday but I closed the program without saving!! >_< so I lost about 4 hours of modeling. Work has been hell this week, hence the low productivity... I'll post the abs pdo on the front page some time today. =D
Click to expand...

will this be done for 5ft 10" like the other models like the chest the full arm etc?
 
Re: Helagaks Iron man Mark 8/42 model and Pepakura files. COMPLETE RE BUILD!! new fil

I've actually started to unfold the helmet. It should be up in the next couple days.
 
You must log in or register to reply here.

Similar threads

FranklyBuilt
MK85 Iron Man Cosplay w/ Infinity Stones - 100% 3D Printed (Pic and resource heavy)
Replies
19
Views
33,815
ReelClones
ReelClones
The14thDr
Mark.XLII/42 Gauntlet & Boot w/ internals
Replies
15
Views
5,667
IronyMan135
IronyMan135
Helagak
Helagak's Mark 45 Project
4 5 6
Replies
116
Views
53,965
Domonator
Domonator
I
Iron Man mark 42
Replies
0
Views
1,453
Iron Gabe
I
CelestialArtist
N00b Iron Man Mark 42 Partial Build Adventure
Replies
3
Views
1,373
CelestialArtist
CelestialArtist
Back
Top