HalloweenCostumes.com “Back to the Future Hoverboard”

[MattgomeryBurns]

any one know how to put Bluetooth speakers inside one of these?

I might be wrong, but I feel like any speaker small enough to fit in the hollow part of the board wouldn't be loud enough for you to hear.

 

[casperdj777]

thinking maybe the ue roll speakers might work (has a cross on it) will cut holes if i have to . cheap junk needs music,wheels or something added to it. if they have fake so called "hover boards that light up , move & play music mine should too! by god i demand it! other wise this future sucks & isn't worth living in.

 

[Spiderstella]

Hi all, need a little help seen this hoverboard for sale and was wondering if it's got the right 3D stuff on it or not? Thank you in advance.

 

[MrSouthpaw]

I might be wrong, but I feel like any speaker small enough to fit in the hollow part of the board wouldn't be loud enough for you to hear.

This board has a lot of empty space inside.

http://www.therpf.com/showthread.php?t=233414&page=6&p=3560985&viewfull=1#post3560985

The pic is a Matty board, but the HC board is gonna be pretty much the same thing.

 

[cavx]

The speaker inside the matty board is like a 1w 2" cone or something pathetic and it made plenty of noise.

 

[MattgomeryBurns]

The speaker inside the matty board is like a 1w 2" cone or something pathetic and it made plenty of noise.

Oh right! You know, I never put batteries in mine so I completely forgot it made noise. I was worried about battery corrosion.

 

[DEADPOOLMCFLY]

So does anyone have vinyl decals for the Halloween costumes hoverboard

 

[marusawa78]

I need the round metallic stickers for the bottom of the board.

 

[cavx]

Oh right! You know, I never put batteries in mine so I completely forgot it made noise. I was worried about battery corrosion.

The main noise it made was as annoying. The best part was when you stood the board upright and it made a different noise for shut down. I pulled my batteries simply because the annoying sound happened every time I bumped the thing. I was also concerned about corrosion but never got past the first few days of the noise.

 

[batfan10]

So does anyone have vinyl decals for the Halloween costumes hoverboard

Ive had no luck getting replacements. I've been trying to get people to email halloweencostumes.com to show them there is interesnt in perhaps getting replacement decals to sell

 

[Moviefreak]

is there a link for the decals ? Thanks!

Go to PAPER PROP section > BACK TO THE FUTURE thread > page 56 > post #1381

 

[MIKEcheck1two]

I went ahead and printed Roland’s stunt board files in A4. It turns out the top graphic fit perfectly width-wise within the HC sticker grooves. I just needed to add some length by making the Velcro strips a little thicker. The bottom graphic needed to be scaled down, as it didn’t fit within the grooves.

The battery pack and connectors were 3d printed.

Overall, I’m quite pleased with how it’s turned out so far. It’s not entirely screen-accurate, but I was aiming for my own interpretation and took some liberties here and there.

Thank you so much Roland for your incredible work on the graphics. They are much appreciated.

 

[Djblingbling1]

What are people doing for the handlebar hole? Black sticker, drilling it out? Im leaning sticker.

 

[mhariush]

Any links to or name of the lenticular sheets? I've read through the whole thread but can't seem to find anything.

thanks

 

[cavx]

Any links to or name of the lenticular sheets? I've read through the whole thread but can't seem to find anything.

thanks

I'm a bit confused about this myself. In the other thread (Matty Collector) there are those saying that you can buy the lenticular material and then there are those who say it is discontinued.

I had no luck finding any, so found something else that seems to work.

This is anti slip draw liners from Ikea.

Sent from my CPH1701 using Tapatalk

 

[HanSewLow]

Any links to or name of the lenticular sheets? I've read through the whole thread but can't seem to find anything.

thanks

The lenticular material is still being made & manufactured by original company that produced the original. Here is the url
http://www.sommers.com/ecommerce/specialties/lenticular-in-rolls-honeycomb/honeycomb-1489.jsp

 

[Roland]

The lenticular material is still being made & manufactured by original company that produced the original. Here is the url
http://www.sommers.com/ecommerce/specialties/lenticular-in-rolls-honeycomb/honeycomb-1489.jsp

The material, yes. But not the correct color.

 

[HanSewLow]

The material, yes. But not the correct color.

Got it. Has anyone tried to dye the clear lenticular using Rit Dye? I've watched some YouTube videos that dye clear visors to black for helmets. Might work.

 

[MattgomeryBurns]

This reminds me - I was on HalloweenCostumes.com last night buying other things and they still have their 20% off coupon if you sign up for their email list. So if anyone is going to pull the trigger on one of these, don't forget to sign up.

 

[cavx]

Got it. Has anyone tried to dye the clear lenticular using Rit Dye? I've watched some YouTube videos that dye clear visors to black for helmets. Might work.

Wouldn't you work out the top from bottom of the sheet and spray paint the bottom?

I read about people losing the 3D effect when glueing the sheet to their boards. If you had a based coat, then the glue would not be a problem. You would still want to use a gel glue and not liquid super glue.

- - - Updated - - -

This reminds me - I was on HalloweenCostumes.com last night buying other things and they still have their 20% off coupon if you sign up for their email list. So if anyone is going to pull the trigger on one of these, don't forget to sign up.

20% off comes in handy.