HalloweenCostumes.com “Back to the Future Hoverboard”

[glasses]

I don't see any unless they are under the magnets - which are held on with screws

They would be hidden under the sticker all along the sides on the bottom of the board you should be able to feel them if they're there I would assume there has to be some since they have the same footpad as the Matty board. Hopefully my board gets here tomorrow it was 8 hours away in Utah today at 2 in the morning so it should be in sandiego by tonight and hopefully it ships out tomorrow morning.

 

[ranallace]

Ok -on closer inspection I DO feel them , small but there- I feel 12 of them around the perimeter of the bottom of the hover board

 

[ranallace]

 

[glasses]

http://i926.photobucket.com/albums/ad110/vshocktrooper/Mobile Uploads/image_zpsiuk678gu.jpg

thank god aha this will make changing the strap out a lot easier

 

[ranallace]

Mattel logos applied

 

[ranallace]

These are the 2 shades of Velcro I found - the darker one at Jo Ann's and the lighter one at hobby lobby - which one think looks better ?

 

[glasses]

The lighter one is the right color

 

[MrSouthpaw]

Anyone else get theirs ?

Yeah, my board doesn't look near as good as yours.

The plastic and whatnot is fine. The stickers are jacked up, wrinkled and crooked. Top and bottom of the board. Gonna call HC first chance about it.

I want my stickers as good as yours.

 

[ranallace]

Sorry to hear your is bad - :cry

 

[xxxOmniJPxxx]

On the left is today's arrival - on the right is my one I made with the decals from England off ebay

http://i926.photobucket.com/albums/ad110/vshocktrooper/Mobile Uploads/image_zpscv2htqhp.jpg

Are the magnets and disc holders one piece or do they actually separate as if they were actually circular magnets?

 

[ranallace]

Are the magnets and disc holders one piece or do they actually separate as if they were actually circular magnets?

They feel all one piece - but will disassemble later and see

 

[glasses]

Yeah, my board doesn't look near as good as yours.

The plastic and whatnot is fine. The stickers are jacked up, wrinkled and crooked. Top and bottom of the board. Gonna call HC first chance about it.

I want my stickers as good as yours.

This sucks now I'm worried I was hoping they got this right now it's just a guessing game can you post pics?

 

[ranallace]

Yes , please post photos

- - - Updated - - -

The lighter one is the right color

That's what I thought as well - thanks

- - - Updated - - -

The magnets and clamps appear to be all 1 piece cast - and kinda not painted well, LOL - wish I would have bought the decals for them now

 

[MrSouthpaw]

This sucks now I'm worried I was hoping they got this right now it's just a guessing game can you post pics?

The board has a mild depression for the sticker to sit in, the sticker runs outside of it about 1/5 to a 1/4 inch at the middle of the board. They obviously misaligned it at the tail and let the error run into the middle of the board. The bottom has the same exact misalignment.

There's some mild wrinkling confined to an area about 1.5 inch in diameter.

The sticker around the perimeter is fine except a mild wrinkle around the tail-bend.

If you're just gonna remove the decal and then cut out portions of it to lay on the lenticular, you should be fine.

I'll try to get some pics if I can get the time.

 

[glasses]

Is anyone planning on making a hole or just putting a black sticker?

 

[Vormz]

Guys, I don't think super glue is a good idea to stick the lenticular material.
You should do some tests before, cause if it's not applied uniformly, you could see the glue through the material.
I used clear double tape and it was ok, not ruining the "3d effect"

 

[glasses]

Guys, I don't think super glue is a good idea to stick the lenticular material.
You should do some tests before, cause if it's not applied uniformly, you could see the glue through the material.
I used clear double tape and it was ok, not ruining the "3d effect"

im planning on only gluing where the decals and velcro will be covering up the lenticular also very small spots around the edges so the glue is not noticeable

 

[Vormz]

It should be fine then.

 

[glasses]

Here's a pic showing where you should put glue on the lenticular, only on the light blue sections. I foud it in the Matty forum a while ago I forgot who posted it though.

 

[glasses]

Here's a comparison between Matty board and hc board with the photos we have keep in mind color temperature differences