H & K MP-5 Gun ship

Discussion in 'General Modeling' started by yuumi2891103, Oct 24, 2011.

  1. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Hi ! to every one.

    Long time no see since I had posted the build of 'Tempest'

    This is the new build I am on now.

    The base is the toy gun H&K MP-5, a couple of unknown hand gun and a binocular I bought at the local one coin shop.:lol They cost me about 6 or 7 dollar.

    Cut them up and put them together !

    [​IMG]

    Binocular :lol

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Roughly assembled. The canopy is not the one I am going t use.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Test build of the cockpit

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Huum:confused Dials are too big.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    And fix the cockpit, dials and canopy.
    This fine vacuformed canopy was provided by my friend Bar (Barry) -san.
    It has a very universal shape. You can fit any type of model. It's really great design !!

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    New panel

    [​IMG]

    [​IMG]

    [​IMG]

    And the first primer applied (I know it's too fast but I can't wait):behave



    [​IMG]

    [​IMG]

    [​IMG]



    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]



    Thank you very much !! My friends !
     
    Last edited: Nov 1, 2011
  2. Jedi Dade

    Jedi Dade Sr Member

    Trophy Points:
    1,880
    Very cool kitbash. One piece of constructive criticism... on the seam lines... I'd either greeblie over them so they are unseen of just more "depth" of detail, or putty them up so they're not quite so obvious. other wise I've never seem some airsoft guns look so spacey :D

    Jedi Dade
     
  3. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Hi!

    Thank you very much for your looking and your comment
    I'm happy that you like it.

    Those upper/lower hull were just put together with some screw so far.
    Because I have to do some LED wiring and put the optic fiber inside.

    All the best,:lol
     
  4. Wayne R.

    Wayne R. Well-Known Member

    Trophy Points:
    716
    Looks great to me, very 'Wipeout'. In fact, if you do another see how the hulls look with a slight angle to them.
     
  5. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Thank you for your comment.

    If you mean what I am thinking, Yup, that's the difficult point when you trim the angle of both fore and aft hull. I am going to insert the brass tube to fix them and avoid warping.:rolleyes

    Lot of things to solve even for a little build like this.:lol
     
  6. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Here are a few progress.

    Install the cockpit tub and a Head Up Display on the glare shield .

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    May be I should get a better camera.

    Thanks,
     
  7. DarthRaggmopp

    DarthRaggmopp New Member

    Trophy Points:
    18
    Manny mobile phone cameras and "normal ones. Have a macro mode. Its specifically(?) for taking close up shots and is usually marked with the symbol of a flower.

    Consult your camera manual if you have it still.

    I love the craft, Cant wait for the paint job. :thumbsup
     
  8. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990

    Hi !

    Thanks for the kind advice.

    All the best,
     
  9. ReproMan

    ReproMan Well-Known Member

    Trophy Points:
    567
    i would never have thought to make a spacey ship body from guns. this forum makes me look at things in new ways
     
    Nobby likes this.
  10. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Thank you very much for dropping by !
     
  11. Capt MarVell

    Capt MarVell Well-Known Member

    Trophy Points:
    931
    Wow, very cool. I was sort of hoping that it would be something in the same scale as your outstanding Tempest model, but this is great too. I like the way the canopy sits low on the model, gives it a hot-rod feel.

    Jim
     
    Nobby likes this.
  12. Wolfie138

    Wolfie138 Well-Known Member

    Trophy Points:
    556
    "a couple of unknown hand gun"
    look like the Robocop guns to me.
    awesome work, very inventive. love the cockpit work.
     
    Nobby likes this.
  13. DarthRaggmopp

    DarthRaggmopp New Member

    Trophy Points:
    18
    This is dangerous for me to see, Now i want to "convert" some of my bb guns into spaceships too!

    And you are welcome, I wait eagerly until you grant us another update on this. :)
     
    Nobby likes this.
  14. 3d-builder

    3d-builder Sr Member

    Trophy Points:
    1,355
    :lol Gwan Katsu thats a great model!:lol:thumbsup
    You nailed the scale of the instrumentation in the
    cockpit and the green back lighting looks excellent!
     
    Nobby likes this.
  15. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Capt MarVell san

    Thank you very much for your comment. I'm so happy that you are saying
    my model as a Hot Rod !! :love


    Wolfie138 san

    Thank you very much for your kind comment :)

    DarthRaggmopp san

    Wow that's the great idea. Keep the safety on :eek




    Thank you Michael my master !
    Yup !! gwan ! I go on and on LOL ! Oh ! I miss Jamaican sun.:behave


    cough,


    Here are some progress.

    Finish the engine nozzle.

    [​IMG]

    Paint job

    [​IMG]

    Fire up the engine ;D

    [​IMG]

    [​IMG]

    [​IMG]

    Add some warning light in the cockpit.

    [​IMG]

    [​IMG]

    [​IMG]

    Finally, put them together.

    [​IMG]

    [​IMG]

    [​IMG]

    So I can get down to the exterior detailing. :D

    Thanks
     
    Last edited: Nov 5, 2011
    Nobby likes this.
  16. Nobby

    Nobby Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    2,261
    Amazing work!
    Every day I am impressed by the skill shown by members :D
     
  17. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Thank you for looking.:lol
    For me, this is the result of many stupid try and errors.

    Katsu
     
  18. Mike J.

    Mike J. Master Member RPF PREMIUM MEMBER

    Trophy Points:
    3,355
    The engine lighting and the instrument panel are incredible!
     
  19. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Thank you !

    It's a little trick but seems worked.
     
  20. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Making the air intake.

    [​IMG]

    Heat pressing

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Thanks
     
  21. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Some boring pics :)

    Put the putty and sanded and sanded.

    [​IMG]

    And made the canopy to be able to open.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Barry san, Again, your canopy is good. !!
     
  22. DarthRaggmopp

    DarthRaggmopp New Member

    Trophy Points:
    18
    I second that, and If I could I would give you waffles.
     
  23. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990

    Thank you for keep watching this !
    I'm glad you like it.

    With a lot of butter please !:behave
     
  24. MonsieurTox

    MonsieurTox Master Member

    Trophy Points:
    2,575
    Mind-blowing as always Katsu-san !
    I love your work my friend !
     
  25. Randy13

    Randy13 Well-Known Member

    Trophy Points:
    915
    I’ve just caught this build for the first time and can’t believe I’ve missed out on this. You Tempest build was fantastic and this one is absolutely wonderful. You have great imagination and your original designs are very inspiring.
     
  26. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Oh ! Hi !! Jurien-san, Thank you very much and I miss you ! How are you doing ? I'm so sorry for long time no see. I'm dieing to see the progress of your great 8 footer Destroyer !

    Best regards, katsu
     
  27. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Randy-san,

    Thank you very much for dropping by !!
    I'm really proud of your wonderful words !
    I'm enjoying this build but many troublesome work is rewarded.

    All the best,
     
  28. sirnaut

    sirnaut New Member

    Trophy Points:
    16
    I was looking around and saw your build and man is it impressive
     
  29. cloudborn

    cloudborn Well-Known Member RPF PREMIUM MEMBER

    Trophy Points:
    621
    Wow, that is looking really good...can't wait to see more pics!
     
  30. MonsieurTox

    MonsieurTox Master Member

    Trophy Points:
    2,575
    Katsu-san, I'm fine thanks ! I hope you're well OK :)
    Ive lost the password of my account on the other board lol Im not sure if I can retrieve it, will try !

    I'm happy to see you're still have a great sense of kitbashing, I really like your style. And this cockpit is a pure piece of art !
     
  31. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Thank you very much !
     
  32. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Thank you very much ! I hope I can post up some better pics next time :)
     
  33. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    We are all fine !

    Thank you but I have to learn the precise and conscientious work of yours my friend :love
     
  34. MonsieurTox

    MonsieurTox Master Member

    Trophy Points:
    2,575
    I dont think you have to learn anything from me Katsu-san ! You got it all !
     
  35. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Here's a little progress.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]



    Some ideas for vertical wings.


    [​IMG]

    [​IMG]


    Thanks
     
  36. IEDBOUNTYHUNTER

    IEDBOUNTYHUNTER Sr Member

    Trophy Points:
    1,355
    Looking cool Katsu, cant wait to see the paint job.


    Al
     
  37. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Thank you Al-san.
     
  38. MedixWerkeShopp

    MedixWerkeShopp New Member

    Trophy Points:
    16
    Talk about a Dymanic and ever expanding build! I like this alot! It's like let's open the thread again for the next surprise! Great Work!

    Mike
     
  39. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Thank you very much Mike-san !! :)

    Today, I did some detailing and panel lines.

    It took many hours !

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Thanks for looking. Any of your comment would be welcomed. :)
     
  40. Ronan87

    Ronan87 Sr Member

    Trophy Points:
    1,830
    What tool do you use to panel line? Mine broke and im looking to replace it.

    Amazing work btw.
     
  41. Darph Bobo

    Darph Bobo Well-Known Member

    Trophy Points:
    746
    That is an awesome build! I can't wait to see it finished!
     
  42. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    I did used a sharpened steel needle because this toy guns are
    made of Polypropylane(PP). It's the hard stuff to scribe a clean lines.

    My friend pro builder told me to use Exacto knife with a cutting face upward.
    This may good for the usual Polistyrane.

    Thanks !
     
    Last edited: Dec 1, 2011
  43. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Thank you very much !!
     
  44. 3d-builder

    3d-builder Sr Member

    Trophy Points:
    1,355
    Id fly this over one of those silly Y-wings or X-wings LOL :lol:thumbsup

    That's a X Y & Z killahhhhhh!:lol
     
  45. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990

    Heey !!
    I think I call this as H-wing fighter !:behave
     
  46. atom

    atom Active Member

    Trophy Points:
    342

    Hi! Konnichiwa!:)

    I am atom.
    I live in GIFU pref. in JAPAN.
    Of course I am Japanese modeler. lol
    I wanna speak Japanese with you, if I can.
    BTW your H-wing fighter is very cooool!
    I'm looking forward to seeing your progress.


    Mata aimashou!:thumbsup
     
  47. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Kon nichi wa

    Fujihira to iimasu. Chiba ni sunndemasu.

    H-wing wo goran kudasatte arigatougozaimasu :lol
    scratch build ha mada hajimetekara korede 3 sakume nandesu.
    orijinaru wo dezain surunoga sukidesu.

    iroiro nayaminagara yatteimasu. anatano sakuhinmo syoukai****e kudasai.

    PM demo daijyoubudesu.:thumbsup
     
  48. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    sorry double post
     
  49. yuumi2891103

    yuumi2891103 Sr Member

    Trophy Points:
    1,990
    Let me put up a few progress.

    I did the underside of the fuselage.

    [​IMG]

    [​IMG]

    A little detailing

    [​IMG]


    A few lines of rivets.

    [​IMG]

    [​IMG]


    Thanks for looking and I'll be happy to hear your comment.:lol

    Katsu,
     
  50. Leon Kowalski

    Leon Kowalski New Member

    Trophy Points:
    17
    I really like your use of the guns as base parts. You're doing a very good job!
     

Share This Page