Guardians of the Galaxy Gamora & Nebula (Andy Park Concept art versions)

[Kotoni]

Hello!

This is our first post! We have a little over 2 weeks left to finish these costumes. This is our first time doing any life casting and mold making so we wanted to share our progress. : )

 

[Kotoni]

1 - Making life casts of our faces with Alja-Safe Alginate.
2 - Fill Alginate negative with Hydrocal.
3 - Clean up Hydrocal positive.
3 - Coat with layers of Rebound 25 Silicone.
4 - (not pictured) cover Silicone mold with plaster bandages.
5 - Fill inside with Ultracal, burlap strips and add a metal pipe handle. We then have our positive faces in Hydrocal.
6 - Sculpt on our faces with Chavant medium clay (smoothed it out with 99% alcohol and terpenoid)
7 - Build a clay way that will be the space for the foam latex to go
8 - (not pictured) coat face with sculpted clay with Ultracal and burlap.
9 - Now we have a positive and negative for foam latex. Just need to clean them both and make any air bubble repairs.
10 - Add holes on high points to allow excess foam latex to escape and help prevent wrinkles.

 

[Soulinertia]

Nice work! Looking forward to more. :thumbsup

 

[Kotoni]

Here is our foam run set up from Monster Makers: http://www.monstermakers.com/produc...x-system-5-gallon-Animatronic-Grade-kits.html

The oven is actually a Masterbuilt digital electric smokehouse from Blain's Farm and Fleet. (33.5" tall) We liked that it had a timer, kept track of the temp, and would shut itself off. We did find that two heads don't cook evenly together so we have to go one at a time.

 

[Kotoni]

Nebula's chest piece was another huge challenge. We really should have just make a positive and negative mold like we did with the foam latex, however we did it the hard way, haha.

Made a aglinate cast of my chest, cleaned it up, filled with plaster, then tried to paint Smooth-On Dragonskin over it. We couldn't get an even coat, it would just pool in certain places and be too thin elsewhere. (first picture)

We ended up making a couple new molds and added the lines in with cording.We succeeded when we did one detail coat followed by thick coats of Dragonskin brushed inside the Rebound negative.

 

[Kotoni]

And here's some other WIP pictures!
View attachment 461789 View attachment 461795 View attachment 461798 View attachment 461799 View attachment 461796 View attachment 461793 View attachment 461797 View attachment 461792 View attachment 461791

 

[Clow]

It looks really cool so far! Can't wait to see it all finished!