"Missile" prototype:
Sight rod with mount:
Barrel extension:
This is a project of mine that has been a long, long time coming, but as the saying goes, "Better late than never!"
If you're interested in getting some parts for this blaster, please feel free to post a reply with the parts needed.
Parts List:
Side Rod (2x per blaster): $15 each ($30)
Side Rod Point (2x per blaster): $19 each ($38)
Sight Rod w mount: $18 each
Sight Rod mount: $10 each
Rear sight: $17 each (Completed)
Cast Black Resin Pontoon (1x per or 2x?): $6 each ($12)
Barrel Extension: $41
Barrel Extension (for real Ruger): $60+/- (Pending)
Trigger Guard (aluminum): $80 (By Request)
Trigger Guard (resin): $15
COAX Reducers (2x per blaster): $3 each ($6) (In stock)
Standard Kit (Includes all parts above - one Pontoon included - accept the Trigger Guard, COAX reducers and Flash Hider): $150
Full Kit (Includes all the parts above - one Pontoon included - accept COAX reducers and Flash Hider): $165
Deluxe Kit (Includes all the parts above - one Pontoon included - accept Flash Hider): $171
What you will need to complete your blaster: Tone arm rectangles (2x), Reade Model Kit rods (2x) and Flash Hider/Grill (1x)
These parts can be purchased from vmusicstore on ebay. See below for more information on additional parts.
Update (as of 10/15): I'm happy to announce that all parts have been completed and most all of the kits/parts have shipped.
I have one, spare kit left along with some spare parts.
When sending your payments, please include your rpf ID so I can check you off the waiting list.
If you are sending a payment via "Family/Friends" please remember to include your shipping address within the message section of your
payment or simply send it in a pm. Thanks!
Waiting list:
Side Rods
1. GSmith (4x) (Paid and shipped on 4/20)
2. Crighton (2x) (Payment Pending)
3. Enaswede (2X) (Paid/Shipped 8/7)
4. DarthWilder (2X (Paid 8/17)
5. el toro (2X) (Paid and shipped on 8/13)
6. sjanish (2x) (Shipped 8/14)
7. Obiwan72 (2x) (Paid/Shipped 8/18)
8. scottjua (2x) (Paid/Shipped 7/7)
9. GSmith (4x) (Paid 6/21 - Shipped 6/22)
10. Seneca (2x) (Paid 5/9 - Shipped 5/11)
Side Rod Points
1. GSmith (4x) (Paid and shipped on 4/20/22)
2. Crighton (2x) (Payment Pending?)
3. Enaswede (2X) (Paid/Shipped 8/7)
4. DarthWilder (2X) (Paid 8/17)
5. el toro (2X) (Paid/Shipped)
6. sjanish (2x) (Shipped 8/14)
7. Obiwan72 (2x) (Paid 8/18)
8. scottjua (2x) (Paid/Shipped 7/7)
9. GSmith (4x) (Paid 6/21 - Shipped 6/22)
10. Seneca (2x) (Paid 5/9 and shipped on 5/11)
Sight Rod with Mount
1. Crighton (Payment pending?)
2. Enaswede (Paid/Shipped 8/7)
3. DarthWilder (Paid 8/17)
4. el toro (Paid/Shipped on 8/13)
5. CE (2x) (Completed)
6. sjanish (Shipped 8/14)
7. scottjua (Paid/Shipped 7/7)
Sight Mount Only
1. HB1098S (Paid 6/22 - Shipped 6/27)
Barrell Extension
1. GSmith (2x) (Paid 6/21 - Shipped 6/22)
2. HB1098S (Paid 6/22 - Shipped 6/27)
3. Enaswede (Paid/Shipped 8/7)
4. DarthWilder (Paid 8/17)
5. el toro (Paid/shipped 8/13)
6. sjanish (Shipped 8/14)
7. scottjua (Paid/Shipped 7/7)
8. Seneca (pm sent)
9. Gprops2
10. PropCollector
Rear Sight
1. Crighton (Payment pending?)
2.
3.
4. el toro (Paid/Shipped 8/13)
5. sjanish (Shipped 8/14)
6. scottjua (Paid/Shipped 7/7)
7. TatooineMachine(?)
Trigger Guard
1. Mgoob (Paid 8/7)
2. el toro (Paid/Shipped 8/13)
3. Crighton (Payment pending?)
4. Enaswede (Paid/Shipped 8/7)
5. DarthWilder (Paid 8/17)
6. Mara Jade's Father (Shipped 8/7)
7. Obiwan72 (Paid 8/18)
8. PropCollector
9. Mrwax
Full Kit - Waiting List 1
1. Enaswede (w Trigger Guard) (Paid/Shipped on 8/7)
2. DarthWilder (w Trigger Guard) (Paid 8/17)
3. el toro (w Trigger Guard) (Paid/Shipped 8/13)
4. sjanish (Shipped 8/14)
5. scottjua (Paid/Shipped 7/7)
Full Kit - Waiting List 2
1. Gprops2 (pm sent)
2. PropCollector (Deluxe Kit - Payment pending?)
3. MarcoCazares (Deluxe Kit - Paid 9/6 - shipped 9/8)
4. IMC3 (Deluxe Kit - Paid 9/8 - Shipped 9/10)
5. Mrwax (Deluxe Kit - Paid 9/8 - Shipped 9/10)
6. Hoda (Deluxe Kit - Paid 9/15 - Shipped 9/16)
7.
8.
Additional parts info:
Original Reade Model flash hiders, small "push rods" and machined Rectangular stylus parts for the side rods are available on ebay from vmusicstore (Field Marshall).
Replica Rugers (by KJWorks) like the one pictured below are also available on ebay from unlimitedwares, although listed as "KJW Airsoft MK1 Luger".
450 FPS KJW AIRSOFT METAL MK1 GREEN GAS FULL SIZE HAND GUN PISTOL w/ 6mm BB BBs | eBay
KJW MK1 Green Gas Airsoft Pistol Gun. Airsoft BBs & Accessories. Airsoft Pistols. Airsoft Rifles. 450 Feet Per Second Projectile Velocity. Airsoft Shotguns. Airsoft Snipers. Rifle & Pistol Accessories.
www.ebay.com
Barrel Extension Install:
Use a ruler to mark the brass rod a little over 2" from the end (about 2 1/16"). Use a hacksaw to cut off the 2".
Use a belt sander to round off the edges of the brass tube. A file and/or sandpaper can also be used. Test fit the barrel extension. Be sure to turn the part so that the notch is near the top of the barrel:
Once fitted in place, use a small tool to tighten the set screw near the bottom edge of the barrel extension.
Last edited:
This is what I have so far. (see photo below) If you are offering some aluminum parts to replace some of my 3d printed parts that would be awesome! Thanks
