Limited Run Greedo Blaster DT-12 Kits

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


Corellianexports

Sr Member
RPF PREMIUM MEMBER
image2.jpg


Deluxe Kit:
Greedo Blaster Kit.JPG


If you're interested in getting a kit, please feel free to post a reply with number of kits and which type (i.e. One Deluxe Kit).

Please be aware that none of the kits include the stylus (Rectangular), flash hider nor push rods. These parts can be purchased from Field Marshall.

Parts List:

Side Rod (2x per blaster): $15 each ($30)
Side Rod Point (2x per blaster): $19 each ($38)
Sight Rod w mount: $18 each
Sight Rod mount: $10 each
Rear sight: $17 each (Completed)
Cast Black Resin Pontoon (1x per or 2x?): $6 each ($12)
Barrel Extension: $41
Trigger Guard (aluminum): $80 (By Request)
Trigger Guard (resin): $15
COAX Reducers (2x per blaster): $3 each ($6) (In stock)

Standard Kit (Includes all parts above - one Pontoon included - accept the Trigger Guard, COAX reducers and Flash Hider): $150

Full Kit (Includes all the parts above - one Pontoon included - accept COAX reducers and Flash Hider): $165

Deluxe Kit (Includes all the parts above - one Pontoon included - accept Flash Hider): $171

What you will need to complete your blaster:
Tone arm rectangles (2x), Reade Model Kit rods (2x) and Flash Hider/Grill (1x)
These parts can be purchased from vmusicstore on ebay. See below for more information on additional parts.

Update (as of 2/27/21): I'm currently working on other projects but I should have an estimated date as to when this run will start in about a month or less.
In the mean time, I am putting together a waiting list to help keep track of interested rpfers. :)

Waiting list for kits:

1. JetSetWilly (Deluxe Kit)
2. dse2187 (Deluxe Kit)
3. JLinNY (Deluxe Kit)
4. Gaffer (Standard Kit with aluminum trigger guard)
5.
6.
7.
8.
9.
10.

Additional parts info:
Original Reade Model flash hiders, small "push rods" and machined Rectangular stylus parts for the side rods are available on ebay from vmusicstore (Field Marshall).

Replica Rugers (by KJWorks) like the one pictured below are also available on ebay from unlimitedwares, although listed as "KJW Airsoft MK1 Luger".


Barrel Extension Install:

IMG_1602.JPG

Use a ruler to mark the brass rod a little over 2" from the end (about 2 1/16"). Use a hacksaw to cut off the 2".
IMG_1603.JPG

Use a belt sander to round off the edges of the brass tube. A file and/or sandpaper can also be used. Test fit the barrel extension. Be sure to turn the part so that the notch is near the top of the barrel:
IMG_1604.JPG
Once fitted in place, use a small tool to tighten the set screw near the bottom edge of the barrel extension.
 
Last edited:

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Corellianexports

Sr Member
RPF PREMIUM MEMBER
Waiting list updated.

I am currently working on a couple of projects with one pending, so it's still difficult to come up with a start date. This may be a summer project, but I should know more by the end of April.
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top