Interest Giddyup Buttercup -- Lifesize Fallout Prop

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


TheAtomicSoul

Active Member
RPF PREMIUM MEMBER
Two feet tall!
Fully poseable -- 19 points of articulation!


I've made a couple of these for others already and since I am going to make another (for myself) I figured I should see if anyone else is interested.
Final product will be made of resin using slush cast and solid pour methods depending on the part.

Changes since photos:
-- Tail may be improved (a little more detail in shape)
-- Head will have a white stripe in the center due to mold design
-- Raw casts: unpainted, may have flashing. Parts will be made with pre-colored resin in white, yellow, and black

Price? (Not entirely sure at the moment.)
Shipping, North America only: Shipping estimate $125 (Based on previous order, TN to Seattle, WA)

(Edit: I've decided to leave the base out since it isn't part of the game and isn't necessary.)
 

Attachments

  • IMG_20190517_125720.jpg
    IMG_20190517_125720.jpg
    2 MB · Views: 252
  • IMG_20190517_125740.jpg
    IMG_20190517_125740.jpg
    2 MB · Views: 223
  • IMG_20190517_125753.jpg
    IMG_20190517_125753.jpg
    2.2 MB · Views: 150
  • IMG_20190517_125802.jpg
    IMG_20190517_125802.jpg
    2 MB · Views: 186
  • IMG_20190517_125900.jpg
    IMG_20190517_125900.jpg
    2.1 MB · Views: 198
  • IMG_20190517_125912.jpg
    IMG_20190517_125912.jpg
    2.3 MB · Views: 227
  • IMG_20190517_130020.jpg
    IMG_20190517_130020.jpg
    1.6 MB · Views: 144
  • IMG_20190517_130039.jpg
    IMG_20190517_130039.jpg
    1.9 MB · Views: 129
  • IMG_20190517_130100.jpg
    IMG_20190517_130100.jpg
    1.7 MB · Views: 150
  • IMG_20190517_130154.jpg
    IMG_20190517_130154.jpg
    1.6 MB · Views: 143
  • IMG_20190517_130231.jpg
    IMG_20190517_130231.jpg
    1.7 MB · Views: 137
  • IMG_20190517_130254.jpg
    IMG_20190517_130254.jpg
    1.7 MB · Views: 363
  • IMG_20190517_130321.jpg
    IMG_20190517_130321.jpg
    1.7 MB · Views: 211
  • IMG_20190517_130712.jpg
    IMG_20190517_130712.jpg
    1.3 MB · Views: 372
  • IMG_20190517_131003.jpg
    IMG_20190517_131003.jpg
    1.3 MB · Views: 127
Last edited:

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

zapwizard

Sr Member
RPF PREMIUM MEMBER
It looks amazing, I wish you the best of luck, it's a pass for me right now.
You mention it poseable, I assume that it isn't attached to the base (as shown in the last photo).
 

TheAtomicSoul

Active Member
RPF PREMIUM MEMBER
Updates are gonna be a tad slow at the moment; most my free time is being spent tearing down a house and cleaning up the property.

Just printed the ears. I'll do a little bit of smoothing, but won't need much since It's printed in resin.
I'll be getting more PLA in soon, so will have a few more pics coming.
 

Attachments

  • 20190910_210839[1].jpg
    20190910_210839[1].jpg
    1.9 MB · Views: 95

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

TheAtomicSoul

Active Member
RPF PREMIUM MEMBER
Another WIP. Printing the smaller parts first.
Gonna start printing on the head next, but gatta decide on how it'll pin togetether first; it's going to be made of three sections and be mostly hollow.
 

Attachments

  • 20190913_134648[1].jpg
    20190913_134648[1].jpg
    1.4 MB · Views: 92

TheAtomicSoul

Active Member
RPF PREMIUM MEMBER
Sorry for the lack of updates; I've been having some printer issues, but I think I've got them (mostly) fixed!
 

Attachments

  • 20191010_133026.jpg
    20191010_133026.jpg
    1.2 MB · Views: 85

TheAtomicSoul

Active Member
RPF PREMIUM MEMBER
So, I was completely wrong in my last post: a middle PCB board in my printer fried and I'm having to wait on a replacement part from China.
I should have gotten it by now but they sent me a message last Monday saying it hadn't been shipped yet. If all goes well I'll get it in soon.
(I've only got one printer, so i've got no choice. )
 

TheAtomicSoul

Active Member
RPF PREMIUM MEMBER
Sorry for the delay folks~ a lot has been happening, but I can't talk about it. :3

So: I got the part to fix my printer, along with ordering parts to fix my older printer so I'll soon have two to work with.

Pics are the old tail and the updated design; I think it'll allow a nice bit of contrast to an otherwise bland part!
I've got most of the body printed now; only got the upper rear legs to go, then will be working on smoothing everything out.
 

Attachments

  • 20191130_120414.jpg
    20191130_120414.jpg
    909.5 KB · Views: 92
  • 20191130_120400.jpg
    20191130_120400.jpg
    937.8 KB · Views: 72

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top