Interest Ghostbusters Jumpsuit (3 versions) by Magnoli Clothiers

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


Indy Magnoli

Master Member
RPF PREMIUM MEMBER
Any special requests regarding zipper pulls should be addressed at time of order or, if you already have a pending order, please e-mail us directly to make sure your order is updated accordingly.
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

abaka9

New Member
That’s great news. I’m placing my order tomorrow. Just trying to work out if I can stretch my finances for the 4 suits i want all at once.
 

extreme_too2

Well-Known Member
Understand about the zipper pulls but I’m happy buyers will be able to switch options around. That’s very cool.

And, I appreciate you adding the pen pockets on the leg of both GB2 suits. I know all of these little tweaks are annoying, but they’ll be worth it in the end. So, yeah, thanks again for your quality customer service.
 

abaka9

New Member
Just went ahead and made my order for my GB1 & Gb2 initially, but I'm certain I'll be ordering another GB2 Herringbone and Charcoal after the holidays. These really are the pinnacle of Flightsuits.
 

Solana

New Member
Finished v3 suit:

View attachment 1374414

All three versions of pre-ordered suits will be shipping soon. They can be ordered here: Paranormal Jumpsuit by Magnoli Clothiers

The inside edge of the chest pockets on the charcoal GB2 suits should be straight, not angled:
straightpocket.jpg


You've got them angled like on the khaki suits. Is this something that will/can be fixed?

I also feel like this seam could be lowered a bit:
seam.jpg
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

extreme_too2

Well-Known Member
Good call on the pocket angle.

You can especially see the pocket details here:
 

Attachments

  • 6D16343A-D3D6-4D5C-88FB-4E566E1BF46E.jpeg
    6D16343A-D3D6-4D5C-88FB-4E566E1BF46E.jpeg
    289.4 KB · Views: 75
  • 3EF36A19-34B7-4513-A837-C5E729A7579B.jpeg
    3EF36A19-34B7-4513-A837-C5E729A7579B.jpeg
    305.1 KB · Views: 71
  • F3BAD3C8-A710-400D-B766-BE2D26D17A04.jpeg
    F3BAD3C8-A710-400D-B766-BE2D26D17A04.jpeg
    228 KB · Views: 89
  • 3199AAD7-9C70-458D-BA5E-7D7454CC17E1.jpeg
    3199AAD7-9C70-458D-BA5E-7D7454CC17E1.jpeg
    344.3 KB · Views: 86
  • C6A143B5-8933-4C2D-ACCD-25FBD30A8F2A.jpeg
    C6A143B5-8933-4C2D-ACCD-25FBD30A8F2A.jpeg
    295.4 KB · Views: 92

Solana

New Member
Looking at the film and more reference photos of the charcoal suits, it looks like Venkman and Stantz have the straight seams, whereas Spengler and Zeddemore have angled. :lol:

I know for me personally, I would prefer to have as close to a "Stantz" version as possible. I don't know if having both versions is an option or not. But it would be nice for those of us after uber accuracy.
 

MercedesSLR

Active Member
After reading most of the comments on this page, I feel like I should get one just for respect and support. The trouble is I have a blue tru-spec in GB2 form and a khaki Propper CWU 27/P NOMEX in GB1 form. Both Patches are from GB Fans. Which suit should I get? I leave it to you loyal GB Fans
 

Filandrius

Sr Member
You want a version 1 in tan rip-stop to replace your GB1, and/or a version 3 in charcoal grey to replace your GB2. Patches are included so no need to keep the ones from GBFans. If you don't want to replace both I'd go with the version 1, but honestly both suits would deserve an upgrade.
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

extreme_too2

Well-Known Member
All the differences in the suits makes me think at least two different teams were working on costuming.

Considering what I’ve heard about the props for GB2, and the incredibly short window they had to produce items, it makes sense.
 

MercedesSLR

Active Member
You want a version 1 in tan rip-stop to replace your GB1, and/or a version 3 in charcoal grey to replace your GB2. Patches are included so no need to keep the ones from GBFans. If you don't want to replace both I'd go with the version 1, but honestly both suits would deserve an upgrade.
Thanks for the insight. I deeply appreciate it. It's funny cause I was thinking to go for version 1 or version 3 of the suit. The blue tru-spec just feels cheap in comparison to the CWU but then again one is made to replicate a flight suit while the other is the real deal lol. I installed the GB Fans patches on both of my current suits since it was the only accurate ones I knew about. However, I'm glad these are ready to go out of the box as the best way I could figure to attach the pipe to my CWU Nomex suit was by velcroing the resin connecter from GB Fans on to the suit. Let's just say ever so often I would notice the hose would be dragging on the ground.
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

abaka9

New Member
Delighted to hear we're so close to the finish line for these products. Can I ask if you have any plans to replicate any of the other uniform parts. Gloves, Boots, Elbow Pads and even the longer sleeved rip stop t-shirt that was worn in GB1?
 

abaka9

New Member
I believe there is someone within the community who owns a set of elbow pads from the second film which are slightly similar to the GB1 pads in shape/design, but not couloir. I have attached the images from the auction when they went on sale. However I don’t recall anybody owning or any documentation of the screen used GB1 pads.
 

Attachments

  • C8AFBDE8-E1F6-4719-8506-8CCCE4648D94.jpeg
    C8AFBDE8-E1F6-4719-8506-8CCCE4648D94.jpeg
    23.4 KB · Views: 65
  • 9A165825-227B-4964-B4AE-322339D297D0.jpeg
    9A165825-227B-4964-B4AE-322339D297D0.jpeg
    22.5 KB · Views: 65
  • 85083BC9-87FA-48F6-9F45-47D718854CF0.jpeg
    85083BC9-87FA-48F6-9F45-47D718854CF0.jpeg
    112.3 KB · Views: 66

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top