Interest 'Ghostbusters' Ecto Goggles remastered NEW RUN THIS JULY

Rhett J Martin

Sr Member
RPF PREMIUM MEMBER
Hello RPF!
I'm happy to offer the Ghostbusters Ecto Goggles from the first film again for 2022's convention and Halloween 2022!

IMG_2131.jpeg




Check out the features:
-Lenses built from measurements of correct Laborec microscope adapters, and assembled in three stages for movement and posing
-Molded from a restored set of AN/PVS 5's, including switch, battery, and interior components
-Assembled and painted with a light 'sun bleached' appearance on the mask, common for the AN/PVS 5 frame
-Castings created in custom color mixes include:
Cold cast aluminum upper lense
Cold cast aluminum lense knobs
Onyx black resin knobs and lense assemblies
OD Green Mask and on/off knob
Metallic grey, gold and black interior components

NO MORE PAINT CHIPPING!

-Matte finish and Bright Foil lense decals add accuracy and detail
-Matte Foil NVG label taken from the source brings mil-spec reality to the mask
-Stantz Industtries dry transfers, sealed in gloss to mimic real NVGs complete the mask.
-Accurate DOT snaps securely fastened to mask, in mil-spec 'government black' with brass base for more realistic wear
-Top D-Ring secured with buttonhead screw and keps nut
-Padded backing for comfort, accurate to film
-Accurate elastic head strap, which includes the correct buckle
-Provided snap and assembly kit for tight custom fit. Hammer and head required, though we don't recommend combining the two
-Upper lenses rotate 360 degrees and can be posed, knobs function and 'lock in' upper lenses
-Lower lenses also move 360 degrees within the inner retaining ring
-Battery cap features a newly corrected transparent and dyed semi-rigid resin battery cap retainer.
-Custom cut acrylic lenses for clarity, inside and out.
-Solid screw construction.
-Real world weight for extra realism
-Interior lense transparency mounted in left lense mimics animation sequence seen in film. Stationary and unlit, but a fun addition for the heck
-removable interior ‘plate’ for installation of electronics or lights
PLEASE make sure you have your correct shipping address AND RPF tag either ready to be clicked or in the notes.

I'm excited to offer these after so much interest! Thank you and Happy Halloween!!

1. Andrea Naldi (FB) ......................(SHIPPED 12/8)
2. Mike Soproni (FB) .....................(DELIVERED 10/16)
3. Josh Franklin (FB) ....................(SHIPPED 10/27))
4. Shant Melkonian (FB) ..............(SHIPPED 10/27)
5. Javier A Saldarriaga (FB) .........(SHIPPED 10/27)
6. Charles Kuwanyaioma (FB) .....(SHIPPED 10/27)
7. Walter (RPF) ............................(SHIPPED 10/27)
8. Glen Frederick (FB) .................(SHIPPED 10/27)
9. Scadge (RPF) ..........................(SHIPPED 10/27)
10. Gregday (RPF) ......................(SHIPPED 10/27)
11. John Tharp (FB) ....................(SHIPPED 10/27)
12. Scud42 (RPF) ........................(SHIPPED 10/27)
13. Forbidden Onion (RPF)..........(SHIPPED 10/27)
14. Nicholas Roccanti (FB)..........(SHIPPED 10/27)
15. Carl DaCorte (FB ..................(SHIPPED 10/27)
16. AdamH (FB) ..........................(SHIPPED 10/27)
17. Captain Bob (RPF) ................(SHIPPED 10/27)
18. Asavage (RPF) ......................(SHIPPED 10/27)
19. ShenPong (RPF) ...................(SHIPPED 10/27)
20. Vertex (RPF) ..........................(SHIPPED 10/27)
21. Steve Parkes (FB) ...…...........(SHIPPED 11/19)
22. Sevv (RPF) ...........…..............(SHIPPED 11/19)
23. RetroCulthcha (RPF) ...….......(SHIPPED 11/19)
24. Lee Bradley (FB)........……......(SHIPPED 11/19)
25. Dave Rotherham (FB) ......……(SHIPPED 11/19)
26. EmmaInCandyland(RPF).........(SHIPPED 11/19)
27. TKZombie (RPF)......................(SHIPPED 11/19)
28. Indiana Fett (RPF)...................(SHIPPED 11/19)
29. Jeffery Tabbor (FB) .................(SHIPPED 11/19)
30. Warren Houck (FB) .................(SHIPPED 12/8)
31. Hairol Mikely (FB.....................(SHIPPED 12/8)
32.The NME (RPF) ........................(SHIPPED 12/8)
33. Thundergod124 (RPF)..............(SHIPPED 12/8)
34. Scottagecheese (RPF) .............(SHIPPED 12/8)
35. MikeyDonuts11 (RPF) ..............(SHIPPED 12/8)
36. Hans Korve (FB).........................(SHIPPED 12/8)
37. Fernando Escobedo (FB)...........(SHIPPED 12/8)
38. Nintendstroid (RPF)....................(SHIPPED 12/8)
39. Jessie Grier (FB) ........................(SHIPPED 12/8)
40. Drockjedi (RPF)..........................(SHIPPED 12/8)
41. Droidboy (RPF) .........................(DELIVERED 3/19)
42. Nick Miranda (FB) ....................(DELIVERED 3/19)
43. Jaq78 (RPF) .............................(DELIVERED 3/27)
44. Ploicano (RPF)(1) .....................(SHIPPED 3/30)
45. Mike Treat (FB) ........................(SHIPPED 3/30)
46. AudiS4 (RPF) ..........................(SHIPPED 3/30)
47. Sycor (RPF) ............................(SHIPPED 3/30)
48. KillerofSaints (RPF) .................(SHIPPED 3/30)
49. Kyle Leavitt (FB)......................(SHIPPED 3/30)
50. Ploicano (RPF)(2) ...................(SHIPPED 3/30)
51. Adam Fowler (FB) ..................(SHIPPED 3/30)
52. Kent Dixon (FB) ......................(SHIPPED 3/30)
53. Warren S. Cummins (FB).........(SHIPPED 3/30)
54. Synz314 (RPF) ........................(SHIPPED 4/4)
55. Signeddiamond (RPF).............(SHIPPED 4/4)
56. Filandrius (RPF)......................(SHIPPED 4/4)
57. Janderson0719 (RPF) ............(SHIPPED 4/4)
58. ScifiDan (RPF) .......................(SHIPPED 4/4)
59. Helixios (RPF) ........................(SHIPPED 4/4)
60. LTsmash1200 (RPF)...............(SHIPPED 4/4)
61. Fett202(RPF)..........................(SHIPPED 4/4)
62. Bbson021987(RPF)...............(SHIPPED 4/4)
63. Tosamc(RPF)........................(SHIPPED 5/13)
64. JimCem99(RPF) ..................(SHIPPED 5/13)
65. Juvatwad (RPF) ...................(SHIPPED 5/13)
66. Mfgb2023 (RPF) …………...(SHIPPED 5/13)
67. Gil-JediXXL (RPF)................(SHIPPED 7/23)
68. BlindVoyeur (RPF)...............(SHIPPED 7/23)
69. Speederbiker (RPF).............(SHIPPED 7/23)
70. Conair Stantz (FB) ..............(SHIPPED 7/30)
71. Matt Wacker (FB).................(SHIPPED 7/30)
72. Douglas Fisher (FB).............(SHIPPED 7/30)
73. CH3Cell (RPF).....................(SHIPPED 7/30)
74. Tim Hill (FB)........................(SHIPPED)
75. JediWannabe (RPF)............(SHIPPED)
76. Mark Curran (FB) ...............(SHIPPED)
77. Ventouguy (RPF) ...............(SHIPPED)
78. Rustypanel (RPF) ..............(SHIPPED)
79. Blake Johnson (FB) ...........(SHIPPED)
80. Kureigu (RPF) ...................(SHIPPED)
81. Bullwhipcracker (RPF) ......(SHIPPED)
82. Kfelts (RPF) ......................(SHIPPED)
83. Tim Cecil (FB) ..................(SHIPPED)
 
Last edited:
Hello RPF!
It's been too long, but thanks to the stay-at-home orders allowing me more bench time, I'm happy to offer the first of many upcoming props and kits; the Ghostbusters Ecto Goggles from the first film!
I've offered these in the past, and was always trying to improve upon each offering, but I can say with no ego, these have been researched, mastered, and molded with excruciating attention to craft, detail, and assembly! These handily beat any replica currently on the market in accuracy as well as price. Sorry fellas, but somebody has to be the best.

I'm offering these for a limited run, and will be quoting a shipping time on the first 20 orders paid of October 15th.
Molds are done, hardware and casting supplies are in hand! Decals, lenses, and other bits and bobs are on order and en route. Parts are already being made!

Price is $250 plus shipping, shipping USPS Priority Domestic and International. If you are in the USA, add $14 for shipping, international* add $25.

*I can not guarantee the 'by Halloween shipping time on international orders, or that your item may be seized as it represents a US Military item. I will however, make every effort to make it plain that they are a replica/toy/model kit. This whole project started due to a past customer never receiving his...9 years ago. It's a long story, but he's getting the pair you see here along with something else for 'interest paid' ;)


Check out the features:
-Lenses built from measurements of correct Laborec microscope adapters, and assembled in three stages for movement and posing
-Molded from a restored set of AN/PVS 5's, including switch, battery, and interior components
-Assembled and painted with a light 'sun bleached' appearance on the mask, common for the AN/PVS 5 frame
-Castings created in custom color mixes include:
Cold cast aluminum upper lense
Cold cast nickel lense knobs
Onyx black resin knobs and lense assemblies
OD Green Mask and on/off knob
Metallic grey, gold and black interior components

NO MORE PAINT CHIPPING!

-Matte finish and Bright Foil lense decals add accuracy and detail
-Matte Foil NVG label taken from the source brings mil-spec reality to the mask
-Macks' Factory dry transfers, sealed in gloss to mimic real NVGs complete the mask.
-Accurate DOT snaps securely fastened to mask, in mil-spec 'government black' with brass base for more realistic wear
-Top D-Ring secured with buttonhead screw and keps nut
-Padded backing for comfort, accurate to film
-Accurate elastic head strap (pictures include incorrect elastic, good stuff en route), which includes the correct buckle
-Provided snap and assembly kit for tight custom fit. Hammer and head required, though we don't recommend combining the two
-Upper lenses rotate 360 degrees and can be posed, knobs function and 'lock in' upper lenses
-Lower lenses also move 360 degrees within the outer retaining ring
-Battery cap features a transparent and dyed semi-rigid resin battery cap retainer.
-Custom cut acrylic lenses for clarity, inside and out.
-Solid screw and epoxy construction.
-Real world weight for extra realism
-Interior lense transparency mounted in left lense mimics animation sequence seen in film. Stationary and unlit, but a fun addition for the heck of it.

Message me here, or through the RPF Facebook page before sending payment.

Payment can be made to Paypal at rjmartin1701@yahoo.com and Venmo at @rhett1701

PLEASE make sure you have your correct shipping label either ready to be clicked or in the notes.

I'm excited to offer these after so much interest! Thank you and Happy Halloween!!

1. Andrea Naldi (FB) (PAID 8/12)
2. Mike Soproni (FB) (PAID 9/1)
3. Josh Franklin (FB) (PAID 9/18)
4. Warren Houck (FB)
5. Javier A Saldarriaga (FB) (PAID 9/19)
6. Cory Smith (FB)
7. Rob James (FB)
8. Scott Biski (FB)
9. Aaron Trebel (FB)
10. Shant Melkonian (FB) (PAID 9/18)
11. Fernando Escobedo (FB)
12. Charles Kuwanyaioma (FB) (PAID 9/19)
13. Derek Lee Thompson (FB)
14. Matthew Mainwaring (FB)
15. Lee Bradley (FB)
16. Steve Sparks (FB) (PAID 9/19)
17. Walter (RPF) (PAID 9/19)
18. Sevv (RPF) (PAID 9/20)
19. Glen Frederick (FB) (PAID 9/19)
20. Scadge (RPF) (PAID 9/19)
*shipping on or before October 15th, 2021

21. Scud42 (RPF)
22.
23.
24.
25.
26.
27.
28.
29.
30.
Hello, Rhett. Please add me to this run. Thank you so much.
 
Thanks to everyone who's paid or contacted so far! We've already got a table full of parts, laser cut lenses are in the mail, and some other stuff is on its way as well! Keep those orders comin'!
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top