E11 build question

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


Senordeadpool

New Member
Hello RPF!
I have the Fieldmarshall e11 kit and Im wondering how the hengstler counter attaches to the scope rail. Theres two tiny holes in the rail but the counter doesnt have any spot to connect to. Should I just drill a new hole in the rail that screws into some spot in the counter like the lower metal part of it? Any help would be appreciated. Thank you!
21AFCD96-7DCE-48AB-A54B-078C30797E79.jpeg
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Marv

Sr Member
RPF PREMIUM MEMBER
You can do it without drilling I have a post on the FISD Whitecroft.net which describes how it can be done. But was with a rail I made but might work with what you have?
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Edraven99

Sr Member
RPF PREMIUM MEMBER
Sorry for the minor hijack... but with regards to the FM scope rail, does anyone know if there's enough material to mod it into an "angled" rail and still have it be able to attach to the rear sight?
 

OdiWan72

Master Member
RPF PREMIUM MEMBER
Not sure what you are referring to?! Chris‘ rail IS designed to be attached to the rear sight...
 

Edraven99

Sr Member
RPF PREMIUM MEMBER
Not sure what you are referring to?! Chris‘ rail IS designed to be attached to the rear sight...

Hey Markus... yes, but his rail is designed to attach straight across.

From what I’ve read, many of the screen used blasters had their rails bent down at an angle before it was attached:

upload_2019-4-24_21-33-54.gif


(Image from Parts of Star Wars website)
 

OdiWan72

Master Member
RPF PREMIUM MEMBER
Ah ok... but the „angled“ rails are not attached to the rear sight but secured directly to the receiver, hence my confusion
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Field Marshall

Sr Member
RPF PREMIUM MEMBER
Sorry for the minor hijack... but with regards to the FM scope rail, does anyone know if there's enough material to mod it into an "angled" rail and still have it be able to attach to the rear sight?
yes,,, you can cut them for the other version im making some but it will be a month or so....
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top