-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Done / Completed DONE
- Thread starter Sarednab
- Start date
gyoung2993
Sr Member
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
Sarednab....is this the finish on the guns or is there supposed to be browning added ???
Sarednab....is this the finish on the guns or is there supposed to be browning added ???
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
:facepalm
Dude, I am a part of this run and I share your enthusiasm....but seriously, let the guy breathe.
-Ss
:facepalm
Dude, I am a part of this run and I share your enthusiasm....but seriously, let the guy breathe.
-Ss
gyoung2993
Sr Member
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
OK I am apart of this run as well...if I have a question...after spending 550.00 ....then I am entitled too
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
Entitlement is a bold and broad statement, and not something that gives you unlimited reign. I'm going to keep this civil, but direct and to the point: you border on annoyance with your constant posts. You're asking questions to obvious answers based on what we all know about the product and its history.
I'm a part of the run, the complete finished piece. I'm spending the same amount of money as you are. I know the history of the piece and trust the seller. I don't feel the need to badger him about every detail. Let him do his work, we all trust that it's going to be the same as the original run.
-Ss
Entitlement is a bold and broad statement, and not something that gives you unlimited reign. I'm going to keep this civil, but direct and to the point: you border on annoyance with your constant posts. You're asking questions to obvious answers based on what we all know about the product and its history.
I'm a part of the run, the complete finished piece. I'm spending the same amount of money as you are. I know the history of the piece and trust the seller. I don't feel the need to badger him about every detail. Let him do his work, we all trust that it's going to be the same as the original run.
-Ss
gyoung2993
Sr Member
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
well for starters...a lot of people have asked sarednab alot of questions....and I don't need your input....when I address someone .....who is not you....you are taking this upon yourself to start something that's not up to you to address me for asking a question ....problem with anything I pointed out to you ....take it up with the admins...and complain.....I don't answer to you
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
You said it all with your first response: ENTITLED.
You clearly have no idea how you come across online, and obviously do not care.
Carry on.
-Ss
You said it all with your first response: ENTITLED.
You clearly have no idea how you come across online, and obviously do not care.
Carry on.
-Ss
gyoung2993
Sr Member
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
you took it ...the way you interpret it to be...your right ..I don't care...I just ask a general question....and you had to step in and not let sarednab answer himself...have a nice day
Serenity
Master Member
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
Thanks for the info! Looking forward to getting it.
It must go next week!
Thanks for the info! Looking forward to getting it.
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
That looks beautiful I can't wait.
That looks beautiful I can't wait.
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
Guys guys, we are all friend we must be happy not aggressive one against other
Regarding the plating. There are something that I not write cause I don't do it only for a "great! Thanks! Wow". Every decision about this project was to give you all the BEST possible!
We have to choose from 2 different plating job. One of it considered a perfect brass plating BUT no possibility for people to work on (you can't give it a more brown apparence), the second is the same plating but it have this possibility! The problem is that if you choose the second, pieces from platers was compkete BROWN!
To give it the look like the one you seen in pics we spent 3 hours...
So, conclusion...we used the hard way...3 hours of work MORE on EACH gun only to give you the option to browning it yourself....
Guys guys, we are all friend we must be happy not aggressive one against other
Regarding the plating. There are something that I not write cause I don't do it only for a "great! Thanks! Wow". Every decision about this project was to give you all the BEST possible!
We have to choose from 2 different plating job. One of it considered a perfect brass plating BUT no possibility for people to work on (you can't give it a more brown apparence), the second is the same plating but it have this possibility! The problem is that if you choose the second, pieces from platers was compkete BROWN!
To give it the look like the one you seen in pics we spent 3 hours...
So, conclusion...we used the hard way...3 hours of work MORE on EACH gun only to give you the option to browning it yourself....
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
The screen used Serenity version is rather clean anyway. Not much of a patina at all.
The screen used Serenity version is rather clean anyway. Not much of a patina at all.
gyoung2993
Sr Member
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
thank you sir...that answered my question...I appreciate your time on letting us know ...these can have browning added ourselves.....I will do some researching to find out the best possibilities to accomplish this process......thank you sirGuys guys, we are all friend we must be happy not aggressive one against other
Regarding the plating. There are something that I not write cause I don't do it only for a "great! Thanks! Wow". Every decision about this project was to give you all the BEST possible!
We have to choose from 2 different plating job. One of it considered a perfect brass plating BUT no possibility for people to work on (you can't give it a more brown apparence), the second is the same plating but it have this possibility! The problem is that if you choose the second, pieces from platers was compkete BROWN!
To give it the look like the one you seen in pics we spent 3 hours...
So, conclusion...we used the hard way...3 hours of work MORE on EACH gun only to give you the option to browning it yourself....
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
Hi Sarednab, Sorry if I am missing your point on this but do I take it from these comments that only the kit version will be produced with a clean brass finish for the recipient to add their own patina or will the finished versions also only have the option of a clean brass finish or completely brown and we will have to age that ourselves, because if so that is not a finished version. Just want to be clear. Thanks John
Guys guys, we are all friend we must be happy not aggressive one against other
Regarding the plating. There are something that I not write cause I don't do it only for a "great! Thanks! Wow". Every decision about this project was to give you all the BEST possible!
We have to choose from 2 different plating job. One of it considered a perfect brass plating BUT no possibility for people to work on (you can't give it a more brown apparence), the second is the same plating but it have this possibility! The problem is that if you choose the second, pieces from platers was compkete BROWN!
To give it the look like the one you seen in pics we spent 3 hours...
So, conclusion...we used the hard way...3 hours of work MORE on EACH gun only to give you the option to browning it yourself....
Hi Sarednab, Sorry if I am missing your point on this but do I take it from these comments that only the kit version will be produced with a clean brass finish for the recipient to add their own patina or will the finished versions also only have the option of a clean brass finish or completely brown and we will have to age that ourselves, because if so that is not a finished version. Just want to be clear. Thanks John
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
Hi John!
Where you read this? All plated kit will be like the one you seen in pics. I never wrote other thing..
You'll receive the same plate of the pics. If you want it more aged you have to age it yourself.
Hi John!
Where you read this? All plated kit will be like the one you seen in pics. I never wrote other thing..
You'll receive the same plate of the pics. If you want it more aged you have to age it yourself.
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
OK so the plated "kits" will look like the pics in post #361 but the finished guns will look like the pics in post #1, yes?
OK so the plated "kits" will look like the pics in post #361 but the finished guns will look like the pics in post #1, yes?
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
Maybe I not explain good.
Plated kit and finished gun will look the same! What's wrong on that look!?!
I still trying to understand you..
Maybe I not explain good.
Plated kit and finished gun will look the same! What's wrong on that look!?!
I still trying to understand you..
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
My question is and sorry if I am being pedantic here, but the pics of the "finished" guns in post #1 clearly shows that the guns have been aged with the appropriate patina for each version, Serenity or Firefly and these were, at least how I understood it, what the finished guns were going to look like, which is why the finished guns cost more than the kits. The pics in post #361 have no patina and if required this can be added, but if I have to do something to the gun to get it to the look like the gun in post #1 then it is not a "finished" version and I might as well have opted for the kit. I hope that this is clear and that somewhere I am missing the point and the finished version that I receive will look like the pics in post #1. I think this was also what gyoung2993 was querying with his question about the finish (sorry if that is not the case)?
My question is and sorry if I am being pedantic here, but the pics of the "finished" guns in post #1 clearly shows that the guns have been aged with the appropriate patina for each version, Serenity or Firefly and these were, at least how I understood it, what the finished guns were going to look like, which is why the finished guns cost more than the kits. The pics in post #361 have no patina and if required this can be added, but if I have to do something to the gun to get it to the look like the gun in post #1 then it is not a "finished" version and I might as well have opted for the kit. I hope that this is clear and that somewhere I am missing the point and the finished version that I receive will look like the pics in post #1. I think this was also what gyoung2993 was querying with his question about the finish (sorry if that is not the case)?
Re: Sidkit Malcolm Reynolds Gun Firefly TV & Serenity Movie ver. DEFINITIVE LIMITED R
For finished gun I mean a finished complete gun ready to be place inthe stand. A finished gun brass plated with wood grips. I don't mean a aged gun.
Pics on post# was for a 10 years old gun. That gun NOT have wood grips.
We choose all the best for you. So, as wrote in post #1 finished gun will be a brass plated gun.
For finished gun I mean a finished complete gun ready to be place inthe stand. A finished gun brass plated with wood grips. I don't mean a aged gun.
Pics on post# was for a 10 years old gun. That gun NOT have wood grips.
We choose all the best for you. So, as wrote in post #1 finished gun will be a brass plated gun.
Similar threads
