Done / Completed Done

Re: Captain America TWS/TFA Helmet 3D Print ***Finished TFA/Smithsonian #595***

I'll be airbrushing too, curious as to what primer, if any, that people are using and paint types. I usually am painting resin and abs stuff, so I use Tamiya, Testors, Humbrols, Floquils, etc. Also, what shades are everyone happy with? Last, Adhesive type, since I'll be building the kit myself (to save time and to give some relief to Biggeek1972!)
 
Re: Captain America TWS/TFA Helmet 3D Print ***Finished TFA/Smithsonian #595***

I see, I start with the biggest area..paint everything then work my way down..that way no making. Helps when your finishing 18 of these guys :)

Looch said:
I just masked off the areas that were lighter, as I found a nice dark blue spraypaint. Also, around the silver parts.
Click to expand...

I use Acrylic inks through the airbrush.. those other paints you mention..and I find spray paint as well...start to crack over time since its not very flexible. Acrylic inks are super thin, water based and basically a thin layer of flexible plastic.. no primer just adhesion promoter I would say..
Not sure what you mean for adhesives? For the leather or gluing the leather into the helmets? Or resin bits together?
gymbeau2000 said:
I'll be airbrushing too, curious as to what primer, if any, that people are using and paint types. I usually am painting resin and abs stuff, so I use Tamiya, Testors, Humbrols, Floquils, etc. Also, what shades are everyone happy with? Last, Adhesive type, since I'll be building the kit myself (to save time and to give some relief to Biggeek1972!)
Click to expand...
 
Re: Captain America TWS/TFA Helmet 3D Print ***Finished TFA/Smithsonian #595***

Haha! I can see how it would:)
 
Re: Captain America TWS/TFA Helmet 3D Print ***Finished TFA/Smithsonian #595***

Greetings,

Sorry I missed this first run. If you do a second, I would be interested in a Winter Soldier stealth suit helmet please, finished with leather straps.

Be seeing you,

Magnus Darcrider
 
Re: Captain America TWS/TFA Helmet 3D Print ***Finished TFA/Smithsonian #595***

Biggeek1972 said:
Not sure what you mean for adhesives? For the leather or gluing the leather into the helmets? Or resin bits together?
Click to expand...

I was under the impression the helmet shell itself comes in three pieces and you have to glue it together, paint then insert the leathers. So I was referring to combining the three parts of the shell. Are you saying it's one piece?
 
Re: Captain America TWS/TFA Helmet 3D Print ***Finished TFA/Smithsonian #595***

Biggeek1972 said:
I see, I start with the biggest area..paint everything then work my way down..that way no making. Helps when your finishing 18 of these guys :)



I use Acrylic inks through the airbrush.. those other paints you mention..and I find spray paint as well...start to crack over time since its not very flexible. Acrylic inks are super thin, water based and basically a thin layer of flexible plastic.. no primer just adhesion promoter I would say..
Not sure what you mean for adhesives? For the leather or gluing the leather into the helmets? Or resin bits together?
Click to expand...

What kind of adhesive do you use for the leather?
 
Re: Captain America TWS/TFA Helmet 3D Print ***Finished TFA/Smithsonian #595***

Definitely interested in a WS one on the next run. Subscribed and eagerly awaiting word! Awesome craftsmanship.
 
Re: Captain America TWS/TFA Helmet 3D Print ***Finished TFA/Smithsonian #595***

I'm looking to purchase all my WS costume components way in advance of halloween.

Any updates on creating a new run of fully painted and leathered up helmets?
 
Re: Captain America TWS/TFA Helmet 3D Print ***Finished TFA/Smithsonian #595***

0705141505d.jpg
0705141503b-1.jpg
0705141503e.jpg
Ok some quick pics of my Cap TWS dome. Still gotta fix a couple minor boo-boos(screwed up cutting the webbing on the side you can't see) and gotta install the rivets.
Thanks again Curtis!
 
Last edited:
Re: Captain America TWS/TFA Helmet 3D Print ***Finished TFA/Smithsonian #595***

I'd be in for TWS helmet with leather if you do more!
 
Re: Captain America TWS/TFA Helmet 3D Print ***Finished TFA/Smithsonian #595***

In for TWS complete w/ leather :)
 
Re: Captain America TWS/TFA Helmet 3D Print ***Finished TFA/Smithsonian #595***

Quick question on those of us kit people - are the getting the leathers unasembled and undyed too, as well as having to trim and paint the shell? If so, cool by me if there are instructions and dye color # provided.

Oh and my earlier comment about assembling the shell was me misunderstanding the pics of the 3-d print, which I assume was your buck for the mold, lol.
 
You must log in or register to reply here.

Similar threads

JOATRASH FX
Done / Completed Oblivion pistol kit V4
Replies
5
Views
839
JOATRASH FX
JOATRASH FX
Snapback4
Lightsaber collection showcase Redux
2
Replies
22
Views
1,220
Snapback4
Snapback4
J
  • Sale
Star Wars Luke Creepy Uncle - Saberbay V4 with KR triangles
Replies
0
Views
245
jakob2121
J
JOATRASH FX
Done / Completed BLADE RUNNER Leon's Concept COP Kit
Replies
3
Views
1,009
JOATRASH FX
JOATRASH FX
I
Star Trek Borg nanotubes
Replies
1
Views
563
renaissance_man
renaissance_man
Back
Top