Unlimited Run Death Star Surface Modules


minifig

Well-Known Member
RPF PREMIUM MEMBER
These are scaled versions of ILM's 'Low Altitude', 2 foot hero versions of the Death Star Surface Modules.

The 6" modules are therefore 1/4 scale versions of these modules, and the 12" modules are 1/2 scale versions.

They are cast from polyurethane resin, sometimes hollow, sometimes solid (depending on which tile or module). They are supplied unpainted.

I usually cast the modules to order, so please allow a week or so for that, then another couple of weeks for delivery.

I cannot claim that they are 100% accurate, as reference material has been quite limited, but I think they are pretty close, with a lot of scrathbuilt, scaled versions of kit parts!

I also don't like to promise that the castings will be 100% bubble free, or without other minor imperfections, so please be aware of that before you buy, though of course, I will always try my best to get them as good as I can.

My progress thread can be found here, which has a few more photos:

http://www.therpf.com/f11/death-star-surface-tiles-48049/

The 6" modules are all priced at £20 GBP including postage.

The 12" modules are all individually priced (see each module) with postage at £20 GBP for the first module, then £10 GBP for each extra module ordered.

The total cost including postage will be confirmed when you order.

6 INCH MODULES

6 " Module 1- £20 GBP including postage ***UPDATED PATTERN***



6" Module 2 - £20 GBP including postage



6" Module 4 - £20 GBP including postage



6" Module 5 - £20 GBP including postage



6" Module 6 - £20 GBP including postage



12 INCH MODULES

12" Module 1 - £60 (postage extra)



12" Module 2 - £60 (postage extra)



12" Module 4 - £70 (postage extra)



12" Module 5 - £80 (postage extra)



12" Module 6 - £80 (postage extra)




If you have any questions, or wish to order some modules, please drop me a PM.

Thanks

Minifig
 
Last edited:

Eboli

New Member
Hi everyone,

I can confirm that I bought the 6 inch versions of Modules 1, 2 and 6. After paying for the modules I received them by overseas post within 2 weeks. They were very well packaged. I am very impressed with the quality of the modules and can certainly recommend them to any future buyers. You won't be disappointed.

Here's hoping for some other modules to become available in 6 inch format.

Cheers!
Eboli
 

minifig

Well-Known Member
RPF PREMIUM MEMBER
Yes they are...:)

They are cast to order and usually take a week or so depending on the quantity ordered, shipping usually then takes up to 2 weeks.

M
 

Johnnyfl

Sr Member
RPF PREMIUM MEMBER
Probably not! (but don't quote me on that! It is the Royal Mail after all!)

M

Yes I understand. One more question, do you also have 6 inch versions on modules 4 and 5. I want a 12" by 12" base but am thinking of mixing up some of your 6" modules to create this. Cheers John
 

Johnnyfl

Sr Member
RPF PREMIUM MEMBER
Hi, When you say they are on your "to do" list does this mean in the next month or so or possibly later?
 

minifig

Well-Known Member
RPF PREMIUM MEMBER
I am planning on starting them in the next month or two...I have one other project to finish and then I'm onto them...but I am notoriously slow...:(
 

minifig

Well-Known Member
RPF PREMIUM MEMBER
...Hopefully I should have the 6" version of module 4 finished in the next week or so :) ...

HURRAH !
 

eegah

Well-Known Member
Awesome work! Love these!
is there a 12" module 3? And if there are 6 different modules, will there be all six versions in both scales? It doesn't look like there is a complete set of 6 in either scale, right?
thanks!
 

minifig

Well-Known Member
RPF PREMIUM MEMBER
eegah ... Yep there are 6 'main' modules that ILM built, I have done all except module 3 at the 12" size, and I'm trying to get the five I've done already into the 6" size.

The plan is to have all 6 modules done at both sizes...one day...

I have just finished the 6" module 4 ... I'll get some pictures up hopefully over the weekend, once it's out of the mould.

If anyone has some reference for the low altitude module 3, I'll be very appreciative. :$

minifig
 
Last edited by a moderator:

Luketallica

New Member
I've been building a 1/48 scale Finemolds X-Wing. I've been holding off finishing it for about a year now because I keep getting the fear when I think about having to scratch build a death star themed base for it. I was actually considering building it in Maya and getting it 3D printed... Then I stumbled across your bases. They are absolutely brilliant! Great Job!

So, i'm interested in purchasing the 6" Module 6 - £20 GBP

What is the best way for me to order a set?

Just in case you are interested. Here's my Red 5. Just need to finish the cannons and complete the base and shes done...

Luke_Preece_XWing.jpg
 

Attachments

  • IMG_0363.JPG
    IMG_0363.JPG
    846 KB · Views: 142

minifig

Well-Known Member
RPF PREMIUM MEMBER
Luketallica ... Your Red 5 looks great! I really like the punchy colours.

If you want to buy any of the tiles just drop me a PM and we can sort it from there :).

M
 
Last edited by a moderator:

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top