Deadpool - 3D Print Files/Pattern - FREE

kenlandrum

Sr Member
This thread is for anyone interested in putting together a Deadpool suit or display.
The pattern is a base and all of the leather, holsters, etc will be on top of it. Parts below are modeled for 3D printing.

Pattern File (03-03-16)
All ready to print, file is CMYK and adjusted to FOD material width
dpPrint.jpgdeadpool-101315-THUMBNAIL.jpg
close.jpghand.jpgArm.jpg
https://drive.google.com/file/d/0B_sNvgA37t6qMEh5c1JZYmpTS2s/view?usp=sharing
Latest revision is only an adjustment to the mask color, it was slightly lighter than the body red and has now been fixed.
----------------------------------------------------------------------------------------------------

Eye Frames
render-01.jpgrender-03.pngrender-02.png
https://drive.google.com/file/d/0B_sNvgA37t6qbkZYLWV0WHBiMTQ/view?usp=sharing

--------------------------------------------------------------------------------------------------------------------------------------------------------------
Shoulder Armor
Shoulder.jpg
https://drive.google.com/file/d/0B_sNvgA37t6qcTVqbVk0UWYzeVk/view?usp=sharing
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Belt Buckle
buckle-02.jpg
80mm Diameter
https://www.shapeways.com/product/QPX4UNP8M/deadpool-movie-belt-buckle-80mm?key=b431de258e7e08d728c320de3bb98e7b

----------------------------------------------------------------------------------------------------

Back Scabbard & Buckles
sheath.jpgsheath-measure.jpgDPBack.jpg
https://drive.google.com/file/d/0B_sNvgA37t6qOFpEN1BxbUE2aGM/view?usp=sharing
or
https://www.shapeways.com/product/65W49QG99/deadpool-movie-back-scabbard-18cm-tall

-------------------------------------------------------------------------------------------------------------------------------------

Leg Scabbard

LegSheath-v2.jpglegSheath.jpg
https://drive.google.com/file/d/0B_sNvgA37t6qX042RUQ1ajlEaE0/view?usp=sharing
or
https://www.shapeways.com/product/467C7DN69/deadpool-leg-sheath-v2

--------------------------------------------------------------------------------------------------------------------------------

Neck Buckle
buckle-01.jpgbuckle-02.jpg

https://drive.google.com/file/d/0B_sNvgA37t6qalEyRXRMcE1ob2c/view?usp=sharing
or
https://www.shapeways.com/product/6389A6ULL/deadpool-movie-neck-buckle-20mm

***PLEASE: This pattern and accompanying models are for the personal enjoyment of ALL RPF members, but PLEASE do not use for commercial purposes without permission.
 
Last edited:

fastman316

New Member
Looking great, I can't wait to see the progress on this. After all, who doesn't love the merc with a mouth!?!
 

The New Blood

Well-Known Member
This thread is for anyone interested in putting together a Deadpool suit or display.
My son asked me to make one for him so I'm gonna take a crack at it. We are basing it on the leaked test footage.

The pattern file is not quite done yet, but I thought I would go ahead and post some images to get feedback. I plan to do the pattern as a base and add all of the leather, holsters, etc on top of it. Some parts may be modeled for 3D printing. They will be here as well.... ok, here we go.

View attachment 443003View attachment 443004
View attachment 443005View attachment 443006
View attachment 443007
I've made my own DP mask pattern,
deadpool mask.png
Not sure how well it would work but I'm sure yours would work awesomely!!!
 

kenlandrum

Sr Member
Finished file here:
https://drive.google.com/file/d/0B_sNvgA37t6qOW1VaXZTdFpoS28/view?usp=sharing

deadpool.jpg
As with my other patterns I am sure I will update accordingly. This suit would have the standard back zipper for now, but as CosBlade commented, a front zipper may be a better look. This is of course a suit with many accoutrements so as I get those all figured out I will post them as well.

Here is the idea behind the assembly of the little saggy tip on the top of the mask... hope this helps.
Top-of-head-instructions.jpg

enjoy!


**Also, please keep usage for personal purposes only.... Thanks!
 

The New Blood

Well-Known Member
Finished file here:
https://drive.google.com/file/d/0B_sNvgA37t6qOW1VaXZTdFpoS28/view?usp=sharing

View attachment 450654
As with my other patterns I am sure I will update accordingly. This suit would have the standard back zipper for now, but as CosBlade commented, a front zipper may be a better look. This is of course a suit with many accoutrements so as I get those all figured out I will post them as well.

Here is the idea behind the assembly of the little saggy tip on the top of the mask... hope this helps.
View attachment 450656

enjoy!


**Also, please keep usage for personal purposes only.... Thanks!
Thanks Santa, I mean Ken. :)
 

dannylopuz

Sr Member
RPF PREMIUM MEMBER
My man, really really beautiful work you got there. I'd lighten up the red tho, in my personal experience, I always get a darker tone when I'm printing stuff. It might be a good idea to add a pattern to add a little bit of texture. Great work so far! Can't wait to see it finished.
 

funkster

Well-Known Member
RPF PREMIUM MEMBER
What do we do for resizing?

I've estimated on my ASM suit to where the neck is and matched the measurement on the DP suit
 

kenlandrum

Sr Member
Yup! Got some changes to make now I suppose...

- - - Updated - - -

My man, really really beautiful work you got there. I'd lighten up the red tho, in my personal experience, I always get a darker tone when I'm printing stuff. It might be a good idea to add a pattern to add a little bit of texture. Great work so far! Can't wait to see it finished.
Thanks! Yup, that's one of the changes.

- - - Updated - - -

What do we do for resizing?

I've estimated on my ASM suit to where the neck is and matched the measurement on the DP suit
You answered your own question... I guess I could add a guideline for measurements on the layered version...
 
Top