Darkside501st's Iron Man Mk VII pepakura files - Password in First Post

[propnoob74]

Re: Darkside501st's Iron Man Mk VII pepakura files

Thank you... now I am curious though. lol



That's a good one, I will add it to the list.

Is anyone else here having trouble logging on since we switched back to TheRPF domain? It used to automatically log me in when I visited the site. Now I have to log in every time and I get kicked out after about 5 min (sometimes even less) and then I have to log in again. It is very frustrating.

I am having the same problem, when I go from one thread to another or if I'm checking out the junkyard it kicks me out and I have to log in like 5 times.....who should we alert about it?

 

[darkside501st]

Re: Darkside501st's Iron Man Mk VII pepakura files

I am having the same problem, when I go from one thread to another or if I'm checking out the junkyard it kicks me out and I have to log in like 5 times.....who should we alert about it?

I have already contacted site administration regarding my issues but I have not heard back from them yet. I am going to clear my cache and cookies to see if that helps... it was suggested that doing that might solve the problem.

 

[aicerg1]

Re: Darkside501st's Iron Man Mk VII pepakura files

Amazing work!!! Great Job to everyone that contributed!! And thanks a million for sharing with us!

 

[quovadis0920]

Re: Darkside501st's Iron Man Mk VII pepakura files

Well It might not be too difficult to send out a set of low def files along side the high detail files... I would need somebody to unfold them cause I wouldn't want to spend my time on low def files.

For me the back and chest needs a more low def model. Other parts are great already and easy to pep. If you have the time just upload them and I'd unfold them for ya gladly.

Oh btw i made an easier to unfold mk7 chest out of your pep. Where should I upload it?

 

[Syrus54]

Re: Darkside501st's Iron Man Mk VII pepakura files

This is what I'm talking about:

i mean... tell me I'm not seeing a difference.

I would've used a picture of the ACTUAL glove from the movie, but i dont have any HD pics of it laying around... so I used the PEP picture.

 

[IronLeoMan]

Re: Darkside501st's Iron Man Mk VII pepakura files

well the glove was another guys pep right

 

[KaanE]

Re: Darkside501st's Iron Man Mk VII pepakura files

Here is a glove from the first movie:

 

[IronLeoMan]

Re: Darkside501st's Iron Man Mk VII pepakura files

 

[IronLeoMan]

Re: Darkside501st's Iron Man Mk VII pepakura files

 

[TonyStarkVE]

Re: Darkside501st's Iron Man Mk VII pepakura files

Hello everyone.

I'm from Venezuela, and although I have been keeping an eye on these forums for a while, I thought I may just stop by and say hi.

Darkside501st, you're doing an awesome job. And all those involved with the project of modeling and unfolding the armour pieces.

I've been planning on making my own armour but for some reasons (mainly [strikethrough] money [/strikethrough] time constraints)I've been unable to continue with the project. I was planning to finish the Mk 6 Armour by the time of the Avengers Premiere, something I could not achieve, but I hope I can finish the Mk 7 by the time of Iron Man 3 Premiere.

I have been able to cut'n glue Sharkmark's MK 3-4-6 helmet with ease (a project that can take up to 4 days working full time on it, since cutting the pieces is a pain, it's easy, but time-consuming), and therefore I assume that putting the other parts of the armour together would be a breeze.

If I make any new progresses, I will keep you guys posted. As of now, I will wait for Darkside501st to make the Version 2 files of the MK VII armour (Because working on such magnitude project is very costly, Especially in a coutry with a truined economy such as mine). But in the meantime, I will keep working on the Mark VI.

Here's a photo of my slim progresses.

Keep up the good work, people!

 

[DON PRIME]

Re: Darkside501st's Iron Man Mk VII pepakura files

New pics:

Hey abaris, por lo visto eres de España asi que podras entenderme, donde conseguiste estas fotos de Iron Man ?? estaran este tipo de imagenes en los demas personajes como Captain America Hulk y Thor ? Si sabes el dato compartelo, por favor.

En cuanto a lo del guante que por ahi mencionan,hay que fijarse en la segunda imagen de Iron Man que compartiste, en ella no se ve dicho detalle por lo tanto no hay que darle mucha importancia a eso, de hecho asi como varian los diseños asi igual varian lo del cuello de todos los trajes de Iron Man, pues en el CGI cambia el diseño al traje original que portan los dobles o el mismo Robert Downey. Esto puedes decirselo a los demas compañeros del foro, ya que aun estoy muy verde en el ingles, sorry.

Por ultimo sabes en cuanto tiempo estara lista la nueva version de la Mark VII que prepara Darkside ?? la primera esta muy buena aunque no se ha subido la version nueva de la espalda donde ya se habia definido los flaps.
Saludos desde Mexico y espero puedas ayudar cuando no entienda algo de por aqui.

 

[KaanE]

Re: Darkside501st's Iron Man Mk VII pepakura files

Por supuesto, aquí están todos: High Resolution Character Images From MARVEL'S THE AVENGERS Released

Lo del guante la gente los sabe, las diferencia entre el Mk II/III y el Mk IV/VI en cuanto a guantes, cuello, botas y casco es nula. Sin embargo para el Mk VII han cambiado todo.

Darkside ha dicho que primero quiere resolver algunas dudas y que empezará cuanto antes, pero sin una fecha concreta. Sin embargo te recomiendo ir haciendo las botas y guantes de Zabana que son 95% lo mismo que el Mk VII (100% Mk II/III/IV/VI).

Cualquier duda, házmelo saber.

____________________________________________

Of course, here they are: High Resolution Character Images From MARVEL'S THE AVENGERS Released

About the glove/hand, people knows about it but the diference between Mk II/II/IV/VI on gloves, boots, neck and helmet are zero. Instead, for Mk VII, they've changed everything.

Darkside said he wants to clear some doubts first and then he'll start on the costume ASAP, but without an ETA. Anyway I would suggest you to start making Zabana's gloves and boots which are 95% accurate to the Mk VII (100% for Mk II/III/IV/VI).

Any doubt, just let me know.

 

[Zerios]

Re: Darkside501st's Iron Man Mk VII pepakura files

It should be fine, you don't fold the foam you cut and glue.

It's fine also for the small parts like arms and head?

 

[jackieisrockin]

Re: Darkside501st's Iron Man Mk VII pepakura files

- HEY... The gloves are different, too.

I think this should clear the hand problem. Its clear the hand is still the same as all the other IM suits (2-6) because that part by the pinky is still flat, not rounded so it was probably just a little mistake in the picture.

http://img217.imageshack.us/img217/217/avgmethod3.jpg

 

[KaanE]

Re: Darkside501st's Iron Man Mk VII pepakura files

I think this should clear the hand problem. Its clear the hand is still the same as all the other IM suits (2-6) because that part by the pinky is still flat, not rounded so it was probably just a little mistake in the picture.

http://img217.imageshack.us/img217/217/avgmethod3.jpg

Yes, it must be because the other pic I posted has a completly diferent hand than any other pic or movie capture.

 

[PariahAU]

Re: Darkside501st's Iron Man Mk VII pepakura files

I would way that more likely is that part of the palm are supposed to be "floating" (in CG) to allow for full movement of the hand (pretty sure there is another picture where it appears the base of the thumb cover has moved as well), and in the abbove picture they just happen to be in a different position. (here is a link to what I am talking about, http://www.imagebam.com/image/c428eb188862691)

 

[CaptainVermont]

Re: Darkside501st's Iron Man Mk VII pepakura files

I just want to thank you, from the bottom of my heart, for the work you've put into these files. It allows a complete novice like me a remote shot at actually creating something awesome!

 

[labsic]

Re: Darkside501st's Iron Man Mk VII pepakura files

Hello Everyone, great forum for projeut armor ironman MARK VII, this raises a question as well as the attached photo:

http://desmond.imageshack.us/Himg585/scaled.php?server=585&filename=sanstitre1zw.png&res=landing

, I notice that the piece which attaches "chest.pdo" has "back.pdo", there is a piece that is not on chest.pdo, is there someone who solved the problem? if yes, thank you for sharing a patch file chest.pdo



thank you

 

[darkside501st]

Re: Darkside501st's Iron Man Mk VII pepakura files

Great job on the build you guys that have posted pictures... they all look great.

Also, thanks to everyone who appreciates my files and hard work. I never get tired of hearing thanks for what I do.

I would way that more likely is that part of the palm are supposed to be "floating" (in CG) to allow for full movement of the hand (pretty sure there is another picture where it appears the base of the thumb cover has moved as well), and in the abbove picture they just happen to be in a different position. (here is a link to what I am talking about, ImageBam)

This is what I was talking about when I said that the glove was made in separate pieces to make it more flexible.

Check this link for more info:

iron man 2 « HP Printer Cartridges – Blog

Hello Everyone, great forum for projeut armor ironman MARK VII, this raises a question as well as the attached photo:

http://desmond.imageshack.us/Himg585/scaled.php?server=585&filename=sanstitre1zw.png&res=landing

, I notice that the piece which attaches "chest.pdo" has "back.pdo", there is a piece that is not on chest.pdo, is there someone who solved the problem? if yes, thank you for sharing a patch file chest.pdo

thank you

Yes, that is what I was calling the collar plate. I never got around to making that before I decided to start making the version 2 files. It is pretty simple. You should be able to free hand it with Sintra or Foam without too much trouble.

 

[DON PRIME]

Re: Darkside501st's Iron Man Mk VII pepakura files

Por supuesto, aquí están todos: High Resolution Character Images From MARVEL'S THE AVENGERS Released

Lo del guante la gente los sabe, las diferencia entre el Mk II/III y el Mk IV/VI en cuanto a guantes, cuello, botas y casco es nula. Sin embargo para el Mk VII han cambiado todo.

Darkside ha dicho que primero quiere resolver algunas dudas y que empezará cuanto antes, pero sin una fecha concreta. Sin embargo te recomiendo ir haciendo las botas y guantes de Zabana que son 95% lo mismo que el Mk VII (100% Mk II/III/IV/VI).

Cualquier duda, házmelo saber.

____________________________________________

Of course, here they are: High Resolution Character Images From MARVEL'S THE AVENGERS Released

About the glove/hand, people knows about it but the diference between Mk II/II/IV/VI on gloves, boots, neck and helmet are zero. Instead, for Mk VII, they've changed everything.

Darkside said he wants to clear some doubts first and then he'll start on the costume ASAP, but without an ETA. Anyway I would suggest you to start making Zabana's gloves and boots which are 95% accurate to the Mk VII (100% for Mk II/III/IV/VI).

Any doubt, just let me know.

Que ondas, si de hecho ya empece a armar la primera version de la Mark pero solo quede en los brazos, me empezare a crear los guantes y las partes de flexion entre los brazos y piernas, de hecho creo que no tendra mucho cambio algunas partes de la nueva Mark que piensa hacer Darkside, he visto varias de las fotos que tengo, incluidas las que posteaste y realmente son pocos los detalles, eso si, concuerdo con un compañero que en cuanto al pecho, le falta la parte superior que va casi unida a la espalda, son detalles minimos.

Ejemplo, los shoulders quedaron perfectos.

De hecho hace unas semanas le comente a darkside (con mi pobre ingles) que esta muy genial su proyecto, pero que realmente es uno de los trajes que me ha costado mas debido a la gran cantidad de piezas pequeñas, por que ciertamente tiene partes asi bien delgaditas o chicas y esas te hacen batallar demasiado, por eso he tenido que modificar en el pepakura Designer uniendo esas piezas para que en vez de pegarlas tengan mejor un doblez en vez de andarlo pegando, para que me sea mas facil y no unir piecita por piecita. Para el que si realmente dudo hacerlo en papel es el abdomen, 37 hojas y lo veo casi como un reto de nunca acabarlo, asi que mejor me evito eso y lo hago con los templates de foam y asi tienes mas flexibilidad.

Creo que endurecer los guantes sera lo mas dificil, quiero ver que tal me va con ellos, alguna idea para poderlos endurecer ??
Saludos