Dann's Blaster Projects - (Latest) Small Dagobah Stunt Update
- Thread starter Dann
- Start date
Shingouki28
Sr Member
So I have what I think is a very close match for the original "marker cap" piece.
Around the time DK Books released the Star Wars Visual dictionary, I was skip diving for parts and greeblies and found an old upright vacuum cleaner, one with a heavy duty fabric dust bag that hung from a clip on the side. The body was white plastic if I recall. It had an interesting looking light grey connector on the power cable which I thought had a good likeness to the DL18 piece. I cant remember if it had a thread to attach it to the machine or whether it was push/clip fit but off it came and went home with several other bits for blasters.
Now my RO72 was missing the front sight so I had to fabricate one from pipe, styrene and milliput.
The "marker cap" piece on my DL18 is now filled with putty and firmly attached to the scratch built parts. But I remember having to chop and modify the part of this connector to the vacuum to fit my replicated RO72 sight part.
It's been away in storage for several years but dug it out recently and have these pics for you. I'll get some more pics once I'm back at work after Xmas.
Around the time DK Books released the Star Wars Visual dictionary, I was skip diving for parts and greeblies and found an old upright vacuum cleaner, one with a heavy duty fabric dust bag that hung from a clip on the side. The body was white plastic if I recall. It had an interesting looking light grey connector on the power cable which I thought had a good likeness to the DL18 piece. I cant remember if it had a thread to attach it to the machine or whether it was push/clip fit but off it came and went home with several other bits for blasters.
Now my RO72 was missing the front sight so I had to fabricate one from pipe, styrene and milliput.
The "marker cap" piece on my DL18 is now filled with putty and firmly attached to the scratch built parts. But I remember having to chop and modify the part of this connector to the vacuum to fit my replicated RO72 sight part.
It's been away in storage for several years but dug it out recently and have these pics for you. I'll get some more pics once I'm back at work after Xmas.
Attachments
Yeah, I found it. Or RE-found it, rather. A half hour or so after Shingouki's post.
I just want folks to please be patient and not lose their minds. There are many sources, but I really would rather we not have a repeat of the situation of so many past discoveries.
I just want folks to please be patient and not lose their minds. There are many sources, but I really would rather we not have a repeat of the situation of so many past discoveries.
Last edited:
lonepigeon
Master Member
Except the axe was built in the US while the DL-18s were made in the UK.
Two different departments.
Last edited:
Man, I completely forgot to share this project with the forum!
Last November (2022), one of my best buddies asked me to build him a Han ANH Hero blaster using a FM base Mauser and an original DEC steel kit.
I’m having trouble finding the progress pics, but I’ve got pics from towards the end of finishing the blaster, and a few comparing it to my MGC Hero.
Can’t believe I forgot to post these, but I suppose I haven’t been around as much as I used to.
This build was to be a more general and idealized version of the blaster and not so much an attempt to replicate every scratch and ding and weathering nuance. I also opted to not paint the lower, since my buddy liked the way the blue turned out so much.
Anyway, on to a massive wall of pics!
And the pics comparing it to my MGC Hero.
I think I made a few modifications to my MGC Hero while I was building this kit. I can recall changing the shape of the cutout on the scope bracket cradle, and later I swapped out the grips. Those original steel DEC parts sure were nice. I think I also had to make custom screws for the scope, though. The originals that came with the kit were missing. I feel like I also changed the finish on his flash hider to better match mine, before finally giving him the finished blaster. Anyway, glad I finally remembered to add this project to my thread!
Last November (2022), one of my best buddies asked me to build him a Han ANH Hero blaster using a FM base Mauser and an original DEC steel kit.
I’m having trouble finding the progress pics, but I’ve got pics from towards the end of finishing the blaster, and a few comparing it to my MGC Hero.
Can’t believe I forgot to post these, but I suppose I haven’t been around as much as I used to.
This build was to be a more general and idealized version of the blaster and not so much an attempt to replicate every scratch and ding and weathering nuance. I also opted to not paint the lower, since my buddy liked the way the blue turned out so much.
Anyway, on to a massive wall of pics!
And the pics comparing it to my MGC Hero.
I think I made a few modifications to my MGC Hero while I was building this kit. I can recall changing the shape of the cutout on the scope bracket cradle, and later I swapped out the grips. Those original steel DEC parts sure were nice. I think I also had to make custom screws for the scope, though. The originals that came with the kit were missing. I feel like I also changed the finish on his flash hider to better match mine, before finally giving him the finished blaster. Anyway, glad I finally remembered to add this project to my thread!
Last edited:
You know what? I can’t believe I didn’t notice this until now.
That newer FM steel flash hider must’ve been off-axis when the rear indexed milled “bullet” cuts were made. I remember thinking they looked extra deep, but I didn’t realize until looking at the pics now that the cuts are much deeper on one side than the other.
I’ll have to contact Chris and my buddy and see if he can get a replacement flash hider.
Edit: here’s some cropped pics showing what I’m talking about.
That newer FM steel flash hider must’ve been off-axis when the rear indexed milled “bullet” cuts were made. I remember thinking they looked extra deep, but I didn’t realize until looking at the pics now that the cuts are much deeper on one side than the other.
I’ll have to contact Chris and my buddy and see if he can get a replacement flash hider.
Edit: here’s some cropped pics showing what I’m talking about.
Last edited:
Good eye, Dann!
Great news! Not that I would’ve thought any different, but FM is sending a replacement.
Best customer service you could ask for, over a YEAR later.
These things are simply what can happen when making hundreds and thousands of parts. Things can slip through the cracks. I’ve worked in machine shops before, so I am certainly familiar with the occasional work-holding misalignment, etc.
Thanks so much for your help, Chris!
Best customer service you could ask for, over a YEAR later.
These things are simply what can happen when making hundreds and thousands of parts. Things can slip through the cracks. I’ve worked in machine shops before, so I am certainly familiar with the occasional work-holding misalignment, etc.
Thanks so much for your help, Chris!
First thing I was going to post! LOL
Wicked build Dann!
Finally got around to finishing the replacement flash hider for my buddy’s Hero blaster. Went with a different finishing method than I've done in the past, and I think it came out great!
I’ll be sending this off as soon as I can.
Also found some better Chronicles style scope rings for my Greedo Killer, and refinished the scope (repainted the main tube). The finish looks factory. It took a lot of work, but it was worth it, in the end. The front scope ring has the proper large thumb wheel. I do also have some high Weaver rings, but for the moment I'm liking the Chronicles look.
I tried to adjust the photo settings to match the photos of the original. Obviously not the best job, but you get the idea.
I’ll be sending this off as soon as I can.
Also found some better Chronicles style scope rings for my Greedo Killer, and refinished the scope (repainted the main tube). The finish looks factory. It took a lot of work, but it was worth it, in the end. The front scope ring has the proper large thumb wheel. I do also have some high Weaver rings, but for the moment I'm liking the Chronicles look.
I tried to adjust the photo settings to match the photos of the original. Obviously not the best job, but you get the idea.
Last edited:
Damn that’s a nice GK! I do think that center screw on the rail needs to be tightened for the Chronicles version of the blaster. Beautiful build regardless!
Also did a little more work on my metal cast Dagobah stunt blaster with printed parts and my printed SE-14R Stormtrooper pistol w/real scope.
First the Dagobah Stunt. Obviously I’m taking a small amount of artistic license with some of the details. And I keep meaning to flip the motor/coil part around, but I always forget.
Now the SE-14R. I modeled and printed a couple of the little box lights for the left side, and can’t decide whether the butt stock attachment part should be there or not. I also need to model and print a sight leaf, figure out what the cylindrical part is above the right grip panel and I would love to know how the wires were setup on the real prop’s left side. Oh, and I smoothed out the knurling on the muzzle nut and receiver end cap.
First the Dagobah Stunt. Obviously I’m taking a small amount of artistic license with some of the details. And I keep meaning to flip the motor/coil part around, but I always forget.
Now the SE-14R. I modeled and printed a couple of the little box lights for the left side, and can’t decide whether the butt stock attachment part should be there or not. I also need to model and print a sight leaf, figure out what the cylindrical part is above the right grip panel and I would love to know how the wires were setup on the real prop’s left side. Oh, and I smoothed out the knurling on the muzzle nut and receiver end cap.
scarf man
Master Member
Me too! I wanna take that Greedo killer out for a nice seafood dinner and a movie! I’m talkin put my phone away and really listen to her vibes.
Similar threads
