Customer build 1/350 NX-01

Status
Not open for further replies.
That's it Rob. It worked fin. the decals are well sealed in. I got a very slight orange pealing in some areas but you really have to look close to see it.

Steve
 
I personally like future for my clear gloss coats because its self leveling, and it produces a very good gloss. But its a little more of a pain to clear it out of the airbrush. I use a dedicated brush for it.
 
This might be a little off topic , will acreation be offering these decals on his site? I would diffently want a few sets of those.
 
space rat said:
This might be a little off topic , will acreation be offering these decals on his site? I would diffently want a few sets of those.
Click to expand...

Yes, I should have them on the site tonight or more likely tomorrow afternoon. I'll probably start with a print run of 20 just to have a few finished sets ready to go to fill orders more quickly.
 
I have your NX-01 aztecs and would certainly be in the market for the PL replacement set. Will be looking for them and thanks for doing them.
 
SteveNeill said:
Best to have some real decals. These are just too old I guess. Even with t e bonder when there old like this I've had too many problems. If the pay was higher on these builds or it was my own maybe. Thanks for the offer. But all these little ones and the pins stripes won't make it bonder or not IMO.

Steve
Click to expand...

Steve -
Round 2 has had some quality issues with their decals and this has been documented on other forums extensively. I think they have addressed their quality control problems and are providing replacement decals free of charge. However, Rob is a great guy and is already taking care of you, so no need to pursue it further in this case. Just an FYI for future reference.
:thumbsup

Marc
 
fraley1701 said:
Steve -
Round 2 has had some quality issues with their decals and this has been documented on other forums extensively. I think they have addressed their quality control problems and are providing replacement decals free of charge. However, Rob is a great guy and is already taking care of you, so no need to pursue it further in this case. Just an FYI for future reference.
:thumbsup

Marc
Click to expand...

This may be a different matter. AFAIK Round 2 has not reissued or in any way touched the 1:350 NX since they bought back AMT/Ertl, MPC and Polar Lights. That fact may mean that they do not have a stock of replacement decals from a kit that was already OOP before they were even bought out. Now for the 1:1000 kit, yes, the reissue kit comes with brand new decals, although someone screwed up the colors.
 
Not much to see but she's all painted with the little details. A few more light leaks I found fixed. Stand finished. No bottle cap anymore. The pole is painted aluminum. I have gone as far as I can until the plaques get here and the decals from Rob.

Moving on to a rush job for Whitley Strieber's new book trailer. I''m doing all the editing and CGI for it. hope to finish by the time the decals get here.

Getting the molding materials for the big TOS Enterprise build next week.

Steve

IMG_6585.jpg


IMG_6596.jpg


IMG_6597.jpg


IMG_6598.jpg
 
Looks great. My own 1:1000 build is parked for now too, but for the paint. I have 4 bottles of metalizer aluminum shipping to me, should get here wednesday, so for now I've got all the sub-assemblies in primer just waiting for paint. I really hate waiting. I could have this thing DONE by wednesday if I had the paint today :/ I was thinking, hey if I hadn't bought those 4 kits I'd have the paint by now, but no, I wasn't thinking about the flammable materials ground-shipping only rule. Our hobby is a cruel one. A whole lot of hurry up and wait. I swear I spend more time waiting for something to dry, than I spend in building. 100 hour builds? More like 20 hour build, 80 hours waiting.
 
Okay, I got them added to the site, about to head up and make a print run of them.

Acreation Models

$10 each plus shipping.

I was also able to squeeze registries for the Columbia into it, so you can use them to make either on-screen ship seen in the show without buying another huge decal set.

I also included a bunch of spares of the tiny and the slightly not so tiny tic marks.

http://www.acreationmodels.com/images/nx350_reg_markings.jpg

There is practically no room left on this sheet. It is bear hugging the printer margins.

I now return you to your regularly scheduled broadcast.
 
Mutant-Enemy said:
Can't wait to see how Steve uses all those tic marks.
Click to expand...

Probably with excessive swearing, like when I built mine.


*And for those people who say "I dont swear I say, darn it or "SHOOT!" Yeah, thats still swearing because the intent behind it is the same. My words are just more fun and colorful :p
 
I feel like Superman, i just did those in practically a day since I didn't do much yesterday. Normally I'd spend 3 or 4 days on something like that.
 
Acreation - Ordered a set... Now when are you gonna get to the new Reliant aztec ;)

Steve - You Da Man! Your NX has inspired me to start mine... and I'm pretty sure MANY of us would be pretty happy with your "imperfect" refit... it looks pretty dang nice too...

Jedi Dade
 
Jedi Dade said:
Acreation - Ordered a set... Now when are you gonna get to the new Reliant aztec ;)

Jedi Dade
Click to expand...

Geez you people are such slave drivers. "Thank you for working all weekend to give us this product... now get back to work, I want more!"

IF things go according to plan, next weekend I'll have the revised decals for the Enterprise B, and the Excelsior. The Reliant will be relealsed at WF, possibly with the Galaxy Quest Protector kit. Feel free to ask questions on the Acreation Models facebook page, so we don't continue to keep hijacking Steve's thread :p
 
Status
Not open for further replies.

Similar threads

modelerdave
1/350 TOS Enterprise "Blasphemer's Edition"
2 3 4
Replies
79
Views
9,445
Reel Fakes
Reel Fakes
Tarekcryptor
Making a practice 1/537 model for aztec painting in airbrush, getting ready for 1/350 build
2 3
Replies
57
Views
4,126
JNordgren42
JNordgren42
G
1/1000 TREK adversaries
2
Replies
20
Views
1,357
publiusr
P
modelerdave
1/350 NX-01 Completed
2
Replies
26
Views
3,634
jake88
jake88
JNordgren42
1/350 Polar Lights Enterprise Refit - Build log
3 4 5
Replies
99
Views
21,842
JNordgren42
JNordgren42
Back
Top