Hi again! I've documented the build process of my Fordo Phase 2 helmet and wanted to share.
Here's Arc-Cpt. Fordo in his bad@$$ Phase 2 Armor:
I took a mixed media approach (which will probably bite back at me during the finishing stages). I started with pepakura, pepping a portion of Space Cowboy's ANH bucket then making my own face:
html]
[/URL]
Once resin and fiberglass was applied, I cut out the aerator bulbs then used spray foam to fill out the visor, cheeks, and chin. Sculpted some details with epoxy clay
Styrene and epoxy clay and XPS styro and bondo:
Here's Arc-Cpt. Fordo in his bad@$$ Phase 2 Armor:
I took a mixed media approach (which will probably bite back at me during the finishing stages). I started with pepakura, pepping a portion of Space Cowboy's ANH bucket then making my own face:
html]
Once resin and fiberglass was applied, I cut out the aerator bulbs then used spray foam to fill out the visor, cheeks, and chin. Sculpted some details with epoxy clay
Styrene and epoxy clay and XPS styro and bondo:
Last edited by a moderator: