Done / Completed C1 Personal Comlink / Hovimix 3D STL file (3 options for ANH, Scout & The Mandalorian) with Freebies

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

mrwax

Sr Member
RPF PREMIUM MEMBER
Just so people can see what these look like printed on a Prusa Mini by someone who is absolutely not a printing guru, here's what I managed to accomplish. The tomtit cylinder was printed horizontally at 0.1mm layer height with a 0.4mm nozzle, the other parts were printed at 0.07mm layer height with a 0.25mm nozzle. No cleanup other than removing supports, the strings on the tomtit should be taken care of pretty easily.

PXL_20210923_225403816.jpg PXL_20210923_224847310.jpg PXL_20210923_224905410.jpg PXL_20210923_224914615.jpg PXL_20210923_224921060.jpg PXL_20210923_224921060.jpg

And here are a couple of less successful attempts compared to the better ones. I tried the tomtit cylinder vertically, that didn't turn out nearly as well as printing it horizontally. The hovimix was printed with a 0.4mm nozzle and I think a 0.1mm layer height.

PXL_20210923_225036186.jpg PXL_20210923_225046663.jpg

Thanks again Jack, these models look great, and they'll look much better printing on a resin printer.
 

Jack2155

Active Member
Just so people can see what these look like printed on a Prusa Mini by someone who is absolutely not a printing guru, here's what I managed to accomplish. The tomtit cylinder was printed horizontally at 0.1mm layer height with a 0.4mm nozzle, the other parts were printed at 0.07mm layer height with a 0.25mm nozzle. No cleanup other than removing supports, the strings on the tomtit should be taken care of pretty easily.
View attachment 1497274 View attachment 1497275 View attachment 1497276 View attachment 1497277 View attachment 1497278 View attachment 1497278

And here are a couple of less successful attempts compared to the better ones. I tried the tomtit cylinder vertically, that didn't turn out nearly as well as printing it horizontally. The hovimix was printed with a 0.4mm nozzle and I think a 0.1mm layer height.

View attachment 1497279 View attachment 1497280

Thanks again Jack, these models look great, and they'll look much better printing on a resin printer.

Hey these look pretty good! The horizontal cylinder does indeed look better overall, the Hovi on the left looks sharp and even the lettering came out pretty nice! Thanks for the posting the prints on an FDM Mr.Max! I appreciate it!
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top