Build TFA F11d Blaster WIP

[hellworker]

i started to build First Order Stormtrooper Blaster recently.. it's still in rough shape for now. and i really needed your critic and advices on the way it goes. tha

 

[Fly4v]

Looks to be a good start. As you say rough but see the shape already.
From all the 3d images people have come up with should be an easy matter to develop the templates for the build and the additional butt-stock is off the shelf if you want the long gun.

 

[Darth Lars]

The biggest detail of the TFA blaster (which some people miss) is that the barrel is not aligned with the back of the receiver. The barrel is higher up. This allows the folding stock to be straight.

 

[hellworker]

yes indeed, but still having problem on deciding the right one to build. im still currius on size on both blaster. i still think that there is two different sizes. the one that he hold his look little bit bigger. that just my though.

 

[mac3kuby]

Love the roughness of this build. keep it up.

 

[hellworker]

The biggest detail of the TFA blaster (which some people miss) is that the barrel is not aligned with the back of the receiver. The barrel is higher up. This allows the folding stock to be straight.

i put a bigger tube on front or barrel. its gone be more big the the back area.

 

[hellworker]

today update is litle bitslow..

 

[hellworker]

The biggest detail of the TFA blaster (which some people miss) is that the barrel is not aligned with the back of the receiver. The barrel is higher up. This allows the folding stock to be straight.

this couple days i've been thinking about what you said,, maybe i found the problem, and i decide to cut the barrel from middle section and rise about 5mm up.

 

[hellworker]

today i resculpt back area, i found something wrong in my previous sculpt.

 

[hellworker]

happy "workbench thustday" everyone.... this litle more update,,

 

[hellworker]

todays update everyone.. first coat to know spot that un straight..

 

[hellworker]

Have a nice weekend everyone....

 

[hellworker]

another update, just prepping on scope and little adjustment on scope base today.

 

[hellworker]

not quite happy, but so excited today..

 

[hellworker]

the scope, minus front cap

 

[hellworker]

this for today's update.

 

[hellworker]

just setting up on off switch placement on trigger for today.

 

[hellworker]

more update,,

 

[hellworker]

after this project has been neglected for a long time, finally I can now continue again to complete this blaster. Here are some of what I've done lately

 

[hellworker]

update for today