formula388
Well-Known Member
This interest thread is for a set of BTTF Hoverboard base parts kit.
The kit would include:
Two sets of magnet assemblies which consists of the base magnet disc and front and middle hold down.
One battery pack
The sizes will be those that have been calculated from screen used boards and many many many hours of work has gone into drawing these as accurately as possible.
These will be sold as a kit and need paint. The parts will be molded from 3D printed parts that have been primed and filled so the pulls are clean.
These are the same 3D printed models that I supplied to Clock88 for his screen accurate board seen here: http://www.therpf.com/f75/bttf-full-hero-hoverboard-build-accurate-color-lenticular-parts-3d-227485/ I collaborated with him and many other forum members to figure out the correct size.
Any questions feel free to ask!
Complete Kit
The price will be $70 plus actual shipping for a full kit of parts. I would need 10 confirmed interested members in order to start the run.
Complete kit Interest List
1. shonie115
2. pandatrooper
3. DB537
4. DB537
5. Sciencebob
6. BTTFSpencer
7. MrSinistar
8. ajhix
9. Razorsharp192
10. shortwookie
11. shortwookie
12. hoverboard
13. dr_slurpee
14. kurtyboy
15. KingsKnight
Single Battery Pack
Price is $20 plus shipping and they will fit in a small flat rate box.
Battery only Interest List
1. xxxOmniJPxxx
2. jhk1976
3. choanata
Battery Pack with extensions to fit HC Hoverboard
Price is $30 plus shipping. These will be produced and shipped after the complete kit and single battery packs are completed.
Battery w/ extensions interest list
1. bigv69er
2. masshysteria
3. carl
4. natedogwithoneg
5. deloreanrob
6. aviin
7. FreddeHamm
8. Estel_MM
9. MEGANTRON
The kit would include:
Two sets of magnet assemblies which consists of the base magnet disc and front and middle hold down.
One battery pack
The sizes will be those that have been calculated from screen used boards and many many many hours of work has gone into drawing these as accurately as possible.
These will be sold as a kit and need paint. The parts will be molded from 3D printed parts that have been primed and filled so the pulls are clean.
These are the same 3D printed models that I supplied to Clock88 for his screen accurate board seen here: http://www.therpf.com/f75/bttf-full-hero-hoverboard-build-accurate-color-lenticular-parts-3d-227485/ I collaborated with him and many other forum members to figure out the correct size.
Any questions feel free to ask!
Complete Kit
The price will be $70 plus actual shipping for a full kit of parts. I would need 10 confirmed interested members in order to start the run.
Complete kit Interest List
1. shonie115
2. pandatrooper
3. DB537
4. DB537
5. Sciencebob
6. BTTFSpencer
7. MrSinistar
8. ajhix
9. Razorsharp192
10. shortwookie
11. shortwookie
12. hoverboard
13. dr_slurpee
14. kurtyboy
15. KingsKnight
Single Battery Pack
Price is $20 plus shipping and they will fit in a small flat rate box.
Battery only Interest List
1. xxxOmniJPxxx
2. jhk1976
3. choanata
Battery Pack with extensions to fit HC Hoverboard
Price is $30 plus shipping. These will be produced and shipped after the complete kit and single battery packs are completed.
Battery w/ extensions interest list
1. bigv69er
2. masshysteria
3. carl
4. natedogwithoneg
5. deloreanrob
6. aviin
7. FreddeHamm
8. Estel_MM
9. MEGANTRON
Last edited by a moderator: